Pumps

BORNEMANN

Condition: used, machine/vehicle number: 800509, volume flow: 290 m³/h, operating pressure: 6 bar, final pressure: 6 bar, power: 135 kW (183.55 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 243 A, protection type (IP code): IP54, Bornemann pump, type W7T.2Z-85, 6 bar, 290 m³/h, year 1997, electric motor BrookHansen, 135 kW, 243A, 1480 rpm. In working condition. All available pumps can be found in the catalogue. Cedpevwlkksfx Aknshc

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Cedpfxsd R Trnj Aknjhc Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. We currently have several oxygen vacuum pumps in stock.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 803412, volume flow: 896 m³/h, operating pressure: 4 bar, Screw pump based on ABB motor 250 kW, 455A, 1486 rpm, Bornemann pump W8.4ZK-144, 4.5 bar, 896 m3/h. Used for transferring fuel oil at a fuel terminal. All pumps currently available can be viewed in the catalogue. Codpjvvlrrofx Aknjhc

Condition: used, Year of construction: 2010, machine/vehicle number: 106547, volume flow: 200 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 132 kW (179.47 HP), rotational speed (max.): 1,315 rpm, Bornemann hevy oil screw pumps, type HC 180-68, 10 bar pressure, 200 m³/h capacity. Equipped with ABB motors, type M3KP315, 132 kW, 232 A. Good condition; 5 units available. Chedpevwmpbofx Aknjc

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. Csdpfxswittpo Aknjhc We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: excellent (used), Year of construction: 1996, Description follows Cedpoxzk Ncjfx Aknshc

Year of construction: 1993, condition: used, Offer in progress! Chodowfturepfx Aknec

Condition: new, SIMOTICS SD MOTOR TYPE: 1CV3282C Low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55, thermal class 155(F) downrated to 130(B), gray cast iron housing, Basic line, Premium Efficiency IE3, 60Hz, P60: IE2, 6-pole * Frame size 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3, 3 PTC thermistors for shutdown (2 terminals), connection box on top. Cedpfxsgpgyms Aknshc

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate with BORNEMANN 960 suction unit Chjdsq Rcu Eepfx Aknjc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² Chjdpfxjxvx U Aj Aknec MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Chodpfjrvg N Djx Aknoc Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: excellent (used), Year of construction: 2007,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Chedpexr U Drefx Aknec Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: reconditioned (used), Aerzen, Robuschi, Spomasz Blower Stages GM 3 GM 4 GM 7 GM 10 GM 15 GM 25 Csdpfx Akexyz S Ejnehc GM 30 GM 35 GM 50 GM 60 GM 80 GM 150 RBS 15 RBS 25 RBS 35 RBS 45 RBS 46 RBS 55 RBS 65 RBS 75 RBS 85 RBS 95 RBS 105 RBS 115 RBS 125 RBS 135 RBS 145