Stenter Frame

Brückner

Year of construction: 1991, condition: good (used), Bruckner stenter frame Year of manufacture: 1991 Working width: 2400 mm Infeed: from batching Weft straightener Coating: above roller or fabric above Knife coating Dryer: Short infeed, suitable for coating Needle chain 6 fields Gas-heated At the exit: squeezing padder Cylinder cooling Output: batching winding, non-stop system USED INDUSTRIAL COOLING SYSTEM FOR COOLING ROLLS Manufacturer: CIAT Model: LGN 150V R410A Kdedpfjzam Awox Airjn Year: 2010 Refrigerant: R410A Power supply: 3 × 400 V / 50 Hz Installed power: approx. 10 kW Cooling capacity: approx. 150 kW Suitable for: Cooling rolls Textile coating lines Calenders Laminating lines Plastic and rubber processing lines

Condition: new, - Shaft diameter 50 mm - The upper roller is hydraulically moved Kjdpfx Aiogg N Tworjdn - Three rollers are driven - Digital display - Can be used horizontally/vertically - Foot switch - Emergency stop - Documentation - 400 V

Condition: good (used), Flange / Intermediate flange / Mounting for faceplates for direct mounting on the spindle Bruckner Ksdpfx Asy U Ug Ujirodn Art. 63.333

Condition: excellent (used), -KOM 3082- Kedpfeww Umtox Airodn Here, a live center from the manufacturer Bruckner is being offered. This center does not conform to any standard specifications. Technical data: Minimum diameter: approx. 84 mm Maximum diameter: approx. 90 mm Shank length: approx. 248 mm Weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Kdjdpfow Tbr Hox Airon Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Ksdpfowc Nyxsx Airodn Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition

Condition: used, Mounting cone: MK 6 Kdodpfx Aijdhwy Terjn Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Weight: 16,9 kg

Year of construction: 1994, condition: ready for operation (used), Control: USK-sensocon, an on-site inspection is possible. Kjdpfx Aoqa A Rzeirsdn

Condition: ready for operation (used), Mounting cone: MK 6 Core tip angle: 90 ° Kodpfx Aijg Ewiwsrsdn Load: 3000 daN max.workpiece weight: 6000 daN Weight: 17 kg

Condition: used, Retainer metric 80 Kdjdpfx Aodhwzwoiren Core tip angle: 60 ° Total length: 380 mm Weight: 18 kg

Condition: new, Year of construction: 2024, New machine Kdjdpfxjw Naans Airsn Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Year of construction: 1992, condition: ready for operation (used), Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007. Kjdpfx Aogny Ugjirjdn

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Kdodpowvgwhefx Airen -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

Year of construction: 2016, condition: ready for operation (used), Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC. Kdjdpfx Aien Tpmqorjn

Condition: used, revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 -Centering tip: Ø mm Kjdpfx Asrp Ildeiredn -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg