Wheeled excavator, S016025

Case WX125

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. Gsdpfx Asy Sf Azsl Uobu This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: used, Year of construction: 2023, operating hours: 1,007 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, Tire size (rear): 710/70 R42, Operating hours: 1007, First registration: 19.12.2024_____Price: 199,000.00 Euro net. First registration: 19.12.2024, Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/hp (ISO 14396), Max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with pre-cleaning for coarse dirt, EasyCare radiator package, Additional fuel pre-filter with water separator, 500-liter fuel tank. Gbodew E N Tdspfx Al Uju

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Godpfxoy A Iv Ee Al Ujbu Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control

Condition: like new (used), Year of construction: 2012, operating hours: 3,432 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner Type C 600 Steam output: 600 kg/h. Gjdeydq Nijpfx Al Uebu Max. steam pressure: 13 bar. Like new, only 3,432 operating hours. Delivery available at extra cost. If you have any questions, please contact us.

Condition: used, mileage: 60,472 km, power: 70 kW (95.17 HP), first registration: 04/2019, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,100 mm, loading space height: 1,250 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0347. Z142338 ----EQUIPMENT * Anti-lock braking system (ABS) with electronic brake force distribution (EBD) * Storage compartments: - Storage compartment on the dashboard - Storage compartments in the front doors - Glove compartment, closed - Open storage compartment in the lower part of the dashboard - Cup holders in the front * Airbags: Front airbags for driver and passenger * Brake assist (BA) * Brake light, third, LED * Interior lighting in the cargo area * Tachometer * Cruise control and speed limiter * Transmission: 5-speed manual * Rear wing doors, closed with an opening angle of 180° * Headrests in the front (3), height-adjustable * Paint: Solid color * Steering wheel, height and length adjustable * Headlight leveling * Multi-information display including speed display (digital), set speed when cruise control is activated, gear display (automatic transmission), service indicator, TRIP, range * Fog lights integrated into the front bumpers, with chrome trim * Package: Comfort package - Air conditioning, manual - Central locking with remote control - Exterior mirrors, electrically adjustable and heated - Power windows in the front, electric, with one-touch up/down function and anti-pinch protection * Package: Visibility package - Automatic headlight control - Rain sensor * Particulate filter: Diesel particulate filter for diesel engines * Upholstery: Fabric/partial vinyl * Radio: Audio system - RDS radio with MP3 playback function - external audio input (AUX) and USB interface - Bluetooth hands-free system * Sliding door on the right, closed * Power steering, electric * Seats: Double passenger seat bench * Seats: Driver's seat, height-adjustable * Seats: Lumbar support for driver * 12 V sockets - in the dashboard * 12 V sockets - in the cargo area * 12 V sockets in the lower glove compartment * Daytime running lights * Toyota Smart Cargo - Pass-through system for an additional 1.16 m of cargo length - Foldable double passenger seat bench for additional cargo space, including a securing net - Mobile office: Office function on the middle seat * Partition, closed, with window including a protective grille and interior mirror * VSC (electronic stability control) with hill-start assist control (HAC) * Laminated windshield * Tie-down points (6) in the cargo area * Immobilizer, electronic ... and more Gjdshqcn Dopfx Al Uebu ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly take your vehicle in part exchange. Financing / Leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Gbedpfx Alszi Ra Rj Ueu Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2003, color: red, loading space width: 2,500 mm, loading space length: 5,100 mm, loading space height: 2,000 mm, Demountable container with crane GMC model: BC 1200 Year: 2003 Crane capacities: 3 m 2,700 kg / 5 m 1,700 kg / 6.90 m 1,400 kg Container dimensions: Length to hook: 6.10 m Gjdpfxjy Ixmlo Al Ujbu Container length: 5.10 m Side height: 2 m Width: 2.50 m Completely overhauled and repainted; Equipped with grab and crane;

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Godpfjyl Uh Sex Al Usbu Weight: 58000kg

Condition: used, Year of construction: 2015, front tire size: 650/60R34, Equipment: compressed air brake, Rear wheel weights Lower links Cat 3/3 Quick Steer Valtra Evolution / seat 2x sockets 12 V Tires 4x NEW front Mitas 650/60 R34 / Gedor N Apfopfx Al Uebu

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: Like new Technical condition: Very good Front tire type: Pneumatic Rear tire type: Pneumatic Rear tire condition: 80 - 100 % Rear work lights, front work lights, heater, full cabin, CE certificate, safety light, exterior mirrors, joystick, windshield wiper, Gbsdpfjzrcu Eex Al Uou