Crawler Loader

Caterpillar 963-12A

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression Dedpfx Ahew Elbdensuu - Conveyor belt speed control - Self-propelled chassis for semi-trailer

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Djdpfxowzaizo Ahnjuu Rotor length approx. 800 mm Motor 18.5 kW Technical data upon request Required space approx. 2050 x 1550 mm All information without guarantee

Condition: excellent (used), power: 191 kW (259.69 HP), fuel type: diesel, color: white, lifting height: 56,080 mm, first registration: 06/2014, mast type: telescopic, Year of construction: 2014, Drive: Wheel Number of cylinders: 6 Mast: Telescopic (4 sections) Mast length: 56.08 m Lifting capacity: 110,000 kg Dedpfxewudg Do Ahneuu Superstructure brand: TEREX TR110 QUADSTAR 1100 + JIB Technical condition: very good Visual condition: very good

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Dsdou Nlkxjpfx Ahnouu

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually Duodpstx Nwnefx Ahnsu * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: used, functionality: unexamined, Year of construction: 2017, Ponsse Fox 8W Timber Harvester (2017) Dodpfoxw U I Ujx Ahnouu with H6 harvesting head

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Dujdoqabm Espfx Ahnsu Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Dujdsh Nvyzopfx Ahneu

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension Dsdpfx Asw H Hwvshnsuu - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 - Tyres: 445/95 R 25 Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: new, Year of construction: 2024, New Aurepa ADR Trailer tank nitrogen, oxygen, argon, gas, cryogenics CRYOBASE tanker Dusdpfx Ahet R R Uqonou New trailer: Year of manufacture of trailer: 2024, made in Germany All necessary documents are available Used tank: Working pressure: 3.85 bar Capacity: 2000 L Delivery is possible. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen, carbon dioxide, hydrogen, methane We would be happy to provide you with a quote or more information.