Joint cutter diesel 7 kW

Cedima CF 16.1D Ø 480 mm

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Lodpfx Asrgq Etegzsak Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Laedpfx Agjqcu Rcszjk

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Ljdpfx Agjv Dtfvozeak Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Ledpfx Aovvkfwogzoak Storage location: Nattheim

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions Laodpfx Ajcuntzjgzjk

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Lajdpfx Agov Szt Dezok Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Lodeg A Hcuepfx Agzoak

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F Edge Banding Machine with pre-milling, corner copying, and two profile scrapers. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for user-friendly operation; up to 12 operating programs can be saved. Edge thickness (coil): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support, special feature extendable up to 950 mm Extraction ports: 80 + 140 mm Units/Equipment: - Quick-change glue pot with glue outlet; two glue pots included (one was used for EVA glue, one for PUR glue). The PUR glue pot is virtually as new, purchased for a single order only. - Manual overhead pressure adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Pre-milling unit with Leitz Whispercut diamond cutters, still sharp - Gluing section with automatic edge feed for coil material up to 3 mm - Pressure zone with 4 rollers - End trimming saw - Integrated edge trim collection bin - Multi-profile milling unit, R2, with pneumatic adjustment between thin and thick edge - Corner rounding unit R2, pneumatically adjustable between thin and thick edge; the molding router can also be used for shelf program, rounding only on straight edges, not corners - Radius scraper R2, pneumatically retractable - Glue joint scraper, pneumatically retractable - Hood lock - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts on the milling and scraper units have been replaced or rotated, saw blades have been sharpened. The machine is ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced but are still sharp. Paintwork has been touched up. The Hebrock AKV series is the predecessor model to the current K series. Machine has only approx. 730 operating hours (glue pot switched on), but the frequency converters have only been switched on for approx. 455 hours. Machine is in very good condition—see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (LxWxH) Weight: approx. 1550 kg Lodpfx Aotpn Etogzeak The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Ljdpfxevqbh Eo Agzjak

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm Lasdpfoi E H Ikex Agzjk