Four-way side loader

Dambach Multi Lifter

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Godpfx Aaenl Nqqe Aeir Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Giedpou Nlkxsfx Aa Ajr

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, SECOND-HAND RECONDITIONED 5 AXIS ROBOT CMA MOD. ROBY 5EX-R - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate Godpfst U Ngaex Aa Ajir RETROFIT 2024

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Univar 15 Unitex 15 Giodpoh H Iyxofx Aa Asr

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Giodpfjytn U Ijx Aa Asr Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Weight kg 2200

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Gijdpfx Aow I A N Aea Ajr

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Gedpfx Aomhhypea Aeir Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 5,250 kg, empty load weight: 5,250 kg, operation weight: 5,250 kg, maximum load weight: 2,000 kg, lifting power: 2 kg/m, lifting height: 4,500 mm, tire size: 16 / 70-20, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.8 m³, Year of construction: 2024, load capacity: 2,000 kg, Equipment: additional headlights, cabin, hydraulics, GUNTER GROSSMANN GG TELE 2000 New high quality telescopic loader Description Godpfju Dcgmjx Aa Aoir Loading weight: 2000 kg Bucket capacity: 0.8 Min. Turning radius: 4600 mm Lifting height: 4500 mm Lifting speed: ≤5.0 s Driving mode: full hydraulic drive on four wheels; Transmission gearbox: hydraulic variable with 2 speeds Total weight: 5250 kg Dimension (L * W * H): 5800 * 2000 * 2750 mm Quick change :yes Includes: Hydraulic Joystick + Quick Coupling + Bucket SPECIFICATIONS Engine: Luotuo Cab: Luxury Adjustable steering wheel: yes Tire size: 16 / 70-20 Timer: Yes Work lights: Yes -LED Reverse camera: Yes Total weight of the machine: 5250 kg Loading weight: 2000kg MAIN DIMENSIONS Dimension (L * W * H) 5800 * 2000 * 2750 mm OPERATING RANGE The height of: 4,5m Rated: speeds 2400 obr./min Maximum: Bucket pull-out force, lifting cylinder 60KN Drive: Four-wheel drive Maximum speed: 22 km / h Braking mode hydraulic: four-wheel disc brake Lifetime: ≤5.0 s

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 10.5 m and a belt width of 0.65 m. Possibility of transport. Gisdpfew Dx Sysx Aa Aer

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem Godpfox Imqlex Aa Aoir • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60