KBK Curves

Demag

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, clamping force: 3,500 kN, screw diameter: 60 mm, total height: 278 mm, overall weight: 27,000 kg, product length (max.): 890 mm, This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. • Max Dosing Volume: 891 ccm Ncedpfx Aox H U Ehofzel

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: sn. 816, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, total width: 4,000 mm, total length: 3,600 mm, total height: 3,500 mm, warranty duration: 12 months, cutting height (max.): 1,300 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, space requirement height: 3,600 mm, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. Nsdpfxowq Dvdj Afzscl The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN Nodpfjx D Nxzjx Afzecl

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. • Witmann included Njdpfx Aox D Hyvofzscl

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Ncsdpfehrukijx Afzsl Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Nsdpfx Aeyctgbsfzjcl Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request Ncodpfxeyctfqe Afzsl

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one Ncjdpfx Afsfg E Hpszsl The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Nsdjyctd Tjpfx Afzjcl Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm Nsdpfx Afsycqy Ejzjcl size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Ncjdpfx Aofn Nddsfzol We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Nsdpfx Afeycqyxjzscl Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Njdpjycqyrjfx Afzscl

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation expandable to full gantry crane span approx. 8.5 m Njdpfx Aomdrt Sjfzocl hook paths approx. 6,0 m DEMAG monorail trolley Floor control system

Year of construction: 1992, condition: good (used), Compressor system consisting of: Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min 3,000 rpm 45 kW Digital display Screw compressor Manufacturer: MANNESMANN DEMAG Model: 085 Rallye Year of manufacture: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 rpm 45 kW Refrigeration compressed air dryer Manufacturer: MANNESMANN DEMAG Model: AD160AB Year of manufacture: 1993 Oil-water separator Model: ÖWAMAT 6 Compressed air receiver Manufacturer: LOHENNER Model: ZU47/21 Volume: 5,000 l Vertical design Year of manufacture: 1993 Ncsdpferi I Rrox Afzol Overpressure: 11 bar