Hall heating 40 kw

GEA Happel 142/402

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher Iiodpfx Aep R Sdhjc Eoi No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Iedodd Dzuopfx Ac Esii Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 1998, operating hours: 3,075 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg Isdswv Enfspfx Ac Esii The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Cutting length 4200 mm Travel path of the material pusher 4250 mm Iiodpfevyyn Njx Ac Eei Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Documentation available Declaration of conformity available

Condition: used, Year of construction: 1998, Price: On request Shredder opening:1000 mm x 800 mm Rotor diameter: 230 mm Number of rotor revolutions: 80 to 120 rpm Main motor power 18 HP Output per hour: 500 to 1,500 kg per hour Air discharge speed: 20 to 30 m/sec. Slider with: Adjustable hydraulic feed ram Transport dimensions: LxWxH 3x1.5x1.5m Iiedpfx Acewh Nbgj Eji - Year: 1998 - Documentation available: No - Serial number: 273407 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Shredding machine with material pusher and rotor. Machine for the production of fuel chips from wood waste and chipboard. Rotor with interchangeable knives (30 pieces) Knives were recently replaced Motor 22 kW Iisdoxat Swopfx Ac Esi Feed opening approx. 840 x 1000 mm Solid steel rotor, approx. 270 mm diameter Rotor speed approx. 135 rpm Shredding capacity approx. 500-850 kg/h Extraction outlet approx. 210 mm / extraction capacity 30-35 m/sec Control cabinet External dimensions: L x W x H approx. 2000 x 1500 mm Weight approx. 2100 kg The data has been taken from a brochure, therefore without guarantee.

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Iijdpfx Ajnwmwvoc Eji German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm No of injectors: 14 Isdpfx Asiwptusc Eoii Positioning of Units by NC: yes

Condition: used, Used suction parts Pipes in the usual dimensions from 80 - 350 mm Iedpfxsntcu Ss Ac Esii Branches from 80-80-80 to 350-350-350 Bends 22.5°, 45° and 90° Electric gate valves Pneumatic sliders controls Special components of all kinds If you are interested in an offer, please send us your detailed specification Availability: immediately Storage location: Hochheim

Condition: excellent (used), Extraction unit Gruss, Isdpfxegq Nxmo Ac Esii 128 bags Diameter 22 cm, length 235 cm