Pressure vessel

GLASS VAS 300

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Gedpfx Agefn Iudjgobi Flow rate vacuum pump: 13 m3/h

Condition: good (used), Several hundred retort trolleys with trays. Lovely condition. Godpfer Iyu Tsx Aggjbi

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test Gjdpexnvq Eefx Aggebi © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. Gjdpfeu R Szaex Aggsbi - new exhibition machine -

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: The byer will another machine- same as the offered for spare parts. Godeimblqspfx Aggobi

Condition: ready for operation (used), motor power 11kW working pressure 10bar capacity 1,59m3/min Gjdpfx Agsnr Hhiogebi

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Gbjdpfei E H Ikjx Aggji Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Gjdot Iwyuepfx Aggebi Engine speed: 2,945 1/min Condition: used (see pictures and type plate)

Condition: used, Year of construction: 2004, 14 spindle system. Connected load: 380/400V/50Hz, 34 kW. Glass thickness: 3-60 mm. Gjdpfxowynzcj Aggjbi

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Gedpfet Nhm Iox Aggebi