Dymatrix 106 CSB

Heidelberg Dymatrix

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production Csdpfeww E Nrjx Afnjgn ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Cgjdpfxsv Nywvo Afnjn Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Cgodot E Nthopfx Afnsn Quick-clamping frame in all tool stations

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Cedpfx Aov T T N Hjfnegn Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Cjdpetxlv Hjfx Afnegn Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: C32 (Remanufactured by Cat), Field of application: Construction Cgodpfx Aewgvqfefnen Empty weight: 18.221 kg Generator capacity: 1.250 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 20 ft HC container Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. Cgjdpfxsxd U Saj Afnon After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Cgodpfx Afev Ifpusnon Possibility to sell them separately

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) Csdpfevphiyox Afnogn * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Max. Speed: 6000 Sh/h Csdpfx Afsvhcgqjnjgn Max. Cutting force: 600 T Centerline Micrometer setting in production