Revlow Oven

HELLER 1809MK III

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 3,450 kg, fuel type: diesel, tank capacity: 500 l, color: white, output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 270 kW (367.10 HP), continuous power: 250 kW (339.91 HP), total length: 3,650 mm, total width: 1,300 mm, total height: 1,850 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 250 (250kW - 270kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 250R SZR - Maximum power - 270 kW / 300 kVA - Rated power - 250 kW / 340 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - 6D10D315A-Turbo (British Series). Fuel Type - Diesel (Diesel) Combustion: - 47.0 liters per hour (at 75% of maximum power) - 34.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 9700 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳POWER: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 444D Rated power 400V - 250000 watts (250kW / 300kVA) 400V maximum power (up to 15 minutes) - 270000 Watt (270kW / 2340kVA) Rated 230V power - 83000 watts 230V maximum power (up to 15 minutes) - 90000 Watt Rated current (400V) - 360.0 A Current protection - C16, C32, main protection - 400A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 500 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 130 x 365 x 185 cm Gross weight - 3450 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load Phjdpfxotp Tfwo Agzsa - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 140Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. We select suppliers of components for our units meticulously, making sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm 20-position tool magazine SK 40 4th axis Lehmann Psdpfx Agsxc N Iyozjha

Condition: defective spare-parts repository (used), Maho MH 600 W from training workshop, exceptionally well-maintained Dimensions Machine depth: 1800 mm Machine height: 2200 mm Machine weight: 3000 kg Table length: 900 mm Table width: 480 mm Psdpfxjxwpyrs Agzeha Travels X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: used, Year of construction: 2002, Technical details: x-travel: 2200/3400 mm y-travel: 550 mm z-travel: 510 mm total power requirement: 36,8 kW table length: 3050 mm Traverse path can be used as a whole or divided into two areas for pendulum machining. 3 axis HSK 100 Phjdpfx Aeldk Uqegzja *

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Control TNC 355C Phjdpfoud Illjx Agzea

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: Phedpfxsv Inw Uj Agzsa 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Condition: excellent (used), Year of construction: 1986, x-travel 500 mm y-travel 430 mm z-travel 400 mm table surface area 800 x 390 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min spindle drive 3 kW quill stroke 80 mm feed - longitudinal/cross 4 - 1600 mm/min feeds vertical 4 - 1000 mm/min rapid motion -longitudinal/cross/vertical 1,6 / 1,6 / 1,0 m/min control HEIDENHAIN, TNC 135 total power requirement 5 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 2,3 x 2,3 x 1,7 m Pjdpfxowi Ugdj Agzsha Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Phodpewid Spofx Agzja Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Year of construction: 2012, condition: ready for operation (used), An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible. Podpfx Agjwf Nywezsha

Condition: used, Year of construction: 2011, Preheating: 4 zones at the bottom • Heating Section: 1,650 mm • Active Cooling Section: 800 mm (2-stage from above) • Chain Pin Transport System: 5 mm pin length with center support • Transport Speed: 0.2 - 2.0 m/min (Realistic for BF products: 0.5 - 0.6 m/min) • Working Width: 50 - 500 mm • Electronic Control: For width adjustment and center support • Clearance Height: +35 mm / 25 mm • Inlet & Outlet Length: 700 mm each • Condensate Management / Process Gas Cleaning in cooling zone • Automatic Chain Lubrication • ERSAsoft and EPOS Basic Module Phedpfx Agev Sy Rujzja • Inline Compatible • SMEMA Compliant • Transport Height: 940 - 965 mm Available from end of Q2 2025. Ask for additional information!