Iberica JRK-105 (2002)

Iberica JRK-105

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Lodsw Tc R Rspfx Akqohf

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine Lodpfx Aswgittskqjhf register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: good (used), Size: max 320 x 260 x 40 mm min 150 x 100 x 2 mm Book block thickness: max 40 mm min 2 mm Cover size: max 560 x 325 mm min 202 x 150 mm Speed: max 5.000 c/h Power requirements 24 kW (220/380V, 50Hz) Length 7.543 mm Width 2.400 mm Equipment gathering machine: chain tensioner with hand fed 20 stations missing sheet and double sheet control perfect binder 18 clamps milling and roughening unit hotmelt spine and side gluing unit pile cover feeder cover pressing station lay down device standards 1 set of operator manuals Ledpfx Akegbxl Ueqjhf standard equipment information: condition: very nice machine in good working condition

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX - Number of gathering stations: 18 - Optical sheet control - Pump(s) - Distribution unit Ljdpfx Aket Sz T Hoqshf - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 - Colour monitor - Pre-loader - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Condition: ready for operation (used), A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible. Lhodpfjtq Hbfox Akqsf

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Lhjdpfxjtq Ha To Akqof

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 30996 B, MAN ROLAND R906-6 LTTL Year 2004 Machine no. 30996 B Total impressions: approx. 405 million Sheet-fed offset press – 6 printing units + 2 varnish coating units + 2 tower dryer units 5 units with conventional inking rollers + 1 unit with hybrid rollers High-pile feeder and extended delivery Technical specifications: - Printing speed: 13,000 sheets/h - Max. sheet size: 1020 x 1420 mm - Min. sheet size: 600 x 850 mm - Stock thickness: 0.2–1 mm - Max. print area: 990 x 1400 mm - Plate size: 1165 x 1430 mm; plate thickness: 0.30 mm - Blanket size: 0000 x 0000 mm; blanket thickness: 1.90 mm - Dimensions (L x W x H): approx. 25.00 x 4.70 x 2.70 m - Power requirement: approx. 00 kW - Weight: approx. 140,000 kg Accessories and features included: - Non-stop feeder - Steel feed table - Stream feeder with vacuum belt - Preset system (automatic paper size and thickness adjustment) - Electronic double sheet detection - Electromechanical double sheet detection Lhedpfjygdl Nex Akqjf - Electronic side lay control (photoelectric and acoustic) - Antistatic devices at feeder and delivery - RCI machine control and diagnostics via monitor console: self-diagnosis, control and monitor console; remote ink and dampening control; axial, circumferential and diagonal register control with light pen; daylight lamp and memory card for job storage - Multi CCI 2D quality control - APL™ fully automatic plate changer - Remote-controlled circumferential, lateral and diagonal register - Rolandmatic continuous dampening system with alcohol dosing, cooling and Technotrans Beta D recirculation unit - Ink temperature control - Programmable automatic blanket wash - Programmable automatic roller wash - 570 mm raised height - Chromed cylinders - AIRGLIDE sheet transport - Anilox UV coating unit with varnish pump - 2 hot air drying towers between coating units - Anilox conventional coating unit with varnish pump - Automatic sheet de-curler - Grafix Cantronic 3000 powder spray - IR ELTOSCH dryer - UV ELTOSCH dryer with 3 lamps - Extended delivery - Steel delivery table - Non-stop feeder - Tools, documentation - Supplied with all standard parts and accessories Availability: Immediate Condition: Good working order, no damage to cylinders or gears Inspection: Machine is in production, test runs possible Video available

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options Lsdpfx Akewh Tq Seqshf • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Lsdpfx Akevtqq Ujqohf

Year of construction: 2007, condition: ready for operation (used), Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. Lhjdpfef H Dlbox Akqef