J-Tec big bag discharging station (big bag)

J-Tec

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available See our other advertisements Gbsdpfx Aljwyf Iyj Ueu

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: Gbodpfx Asyx Uy Asl Usu • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Bulk discharge cabinet, bag discharge hopper Godpfxjwyf D Is Al Ujbu Includes extraction system and Aerob filter unit. Entirely made of stainless steel. Excluding fan and filter cartridge. See our other listings. VMA Wekerom

Condition: used, J-Tec product silo discharge cabinet Entirely made of stainless steel Year of manufacture: 2018 Equipped with load cells and a supporting frame (load cells are defective) Gbsdpfx Alszc Icde Uou Equipped with a vibrating base and a stainless steel butterfly valve Equipped with a pneumatic bunker vibrator and a level sensor See our other listings VMA Wekerom

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Gbodpfx Aljukrcpj Uou Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Condition: used, This listing is for the Agilent Cary 1260 infinity HPLC system The units are in full working condition and are ready for immediate use The Agilent Cary 1260 Infinity HPLC system is a robust and versatile high-performance liquid chromatography platform engineered for reliability, high throughput, and analytical precision. It's widely used in pharmaceutical, environmental, food, and chemical analysis The system's modular architecture allows for tailored configurations, enabling users to select components such as pumps, detectors, and sample managers to meet specific analytical needs. This flexibility facilitates upgrades and maintenance, ensuring the system can evolve alongside technological advancements and changing laboratory requirements. This combination includes the following part Nos. Godpfxoxv A Sle Al Ujbu G7111A Quat Pump G7111 Purge Valve G7129A Vial Sampler G7115A Diode Array Detector G7115 Preparative Flow Cell 160 Infinity R1 Detector Pressure Range: Up to 600 bar, accommodating smaller particle size columns for higher resolution and faster separations. Supports a wide flow range, up to 10 mL/min at 200 bar, suitable for standard to semi-preparative applications. Injection Volume: Flexible injection volumes ranging from 0.1 µL to 1800 µL, depending on the configuration and options selected. Column Capacity: Supports up to four columns with direct access to each column through a Quick-Change switching valve, enhancing flexibility and eliminating the need to disconnect and reconnect columns. Temperature Control: Features efficient column handling and temperature control, with options for multiple temperature zones, ensuring optimal conditions for various applications.

Condition: refurbished (used), “Bakker Magnetics 29.723/12 – 800mm.” for Sale Manufacturer: Bakker Magnetics Gbsdpjw R N Tmsfx Al Ueu Type: 29.723/12 Belt widthness: 800 mm (New belt) Included: – New Control-unit

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Technical data and description: see pictures Gbsdpjh Eii Tjfx Al Usu

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Gbjdpfx Aecx Smbel Ueu Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Oil hermetical distribution transformer, producer - ELIN, made in Czech republic, 630kVA, 10/0,42kV, Dyn1, ONAN, uk=4%, year of production 2006, functional, rutine test report, design documentation, available 2 pcs. Gbedpex Nxtusfx Al Uju