Electric pallet stacker / high-lift pallet truck / pallet truck

Jungheinrich EJC 14

Condition: used, Jungheinrich EJC 14 Lifting ant no. 265 Stroke: 2900mm Rated load capacity: 1400 kg Operating hours: 3389 h Further technical data see pictures. (Changes and errors in the technical data, information are reserved) We are happy to organize a cost-effective forwarding agent for you. organize! You are welcome to come by for a viewing. You will receive a proper invoice. Foreign customers can also receive a net invoice. can also be issued. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their respective owners. and serve only to identify and describe the products. Gusdpjuuy Rpefx An Esi The design and electrical connection of the machine / The installation and electrical connection of the machine/device must be carried out by a trained specialist. checked.

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Guodpsyvtugsfx An Esi

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH type EJC Z14 250 ZT Serial no. 90358452 Year of manufacture: 2010 Rated load capacity: 1400 kg Load center: 600 mm Rated lift height: 2500 mm Fork length: 1150 mm Overall length: 2050 mm Overall width: 840 mm Overall height: 1700 mm Operating voltage: 24 Volt - Initial lift for negotiating floor thresholds - Duplex mast - 1676 operating hours (readout) - Battery from 2016, type 24V 3PZS 375 (24V/375 Ah) Guodsxvdv Eepfx An Eei - Automatic charger Jungheinrich 24 volt, 50 ampere - Surcharge for new UVV inspection = 150,-- EUR net Weight: 1200 kg Good condition

Condition: good (used), functionality: fully functional, operating hours: 4,170 h, load capacity: 1,400 kg, fuel type: electric, battery voltage: 24 V, Technical data: • Manufacturer: Jungheinrich • Model: EJC B14 • Load capacity: 1,400 kg Godpsyvfhqjfx An Eoui • Electric drive • Integrated charger 24V / 40A • Battery indicator with operating hours counter (approx. 4,170 h as per display) • Initial lift / support arms (see pictures) • Key operation • Robust industrial design Condition: Used condition with normal signs of use (see pictures). Unit is operational. Inspection and test run possible by arrangement. Miscellaneous: Sale as seen Inspection and collection in Hagen a.T.W. possible by arrangement Location: Hagen a.T.W. Sale by company → without warranty & guarantee, subject to errors

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 480 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, swing diameter over cross slide: 300 mm, turning diameter over bed slide: 430 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with FANUC 0i-TF, 3,573 hours, like-new condition! Includes a parts collection device for transporting finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 3,573 h • Power-On Hours: 14,792 h (Control ON) • Machine Type: Single-spindle with parts collection device • Number of Tool Positions: 12-station VDI-30 axial turret with two hole patterns • Number of Axes: 2 (X/Z) • Chip Conveyor Interface: Yes, available • Condition: Like-new, fully functional (Inspected by EMCO technicians on November 9, 2026! - Inspection report will be provided upon request) • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, an EMCO EMCOTURN E45 from 2021, with low operating hours of only 3,573 h, in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming including handwheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the work area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-station axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swing diameter over bed: 430 mm • Swing diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. workpiece length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Guodszkhuhopfx An Eoi Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-station VDI-30 axial turret with two hole patterns • Shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & Terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91601847, Year of construction: 2016, operating hours: 1,207 h, load capacity: 750 kg, lifting height: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,710 mm, battery capacity: 375 Ah, battery voltage: 24 V, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 1,640 kg, Equipment: clamp, Jungheinrich EJC B14 Pallet stacker, year of manufacture 2016 with a Standard mast and box clamp Details: Jungheinrich EJC B14 Year of manufacture: 2016 Work hours (h): 1207 Mast type: Standard Lift height (mm): 2500 Freelift (mm): 0 Build height (mm): 1710 Initial lift: No Lift capacity (kg): 750 Weight (kg): 1640 Front wheels: Polyurethane Gedpfezi Ruhox An Eoui Rear wheels: Polyurethane Battery YOM: 2016 Battery capacity (Ah): 375 Battery voltage (V): 24 Accessories: Box clamp.

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 7,000 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 510 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 6,000 rpm, feed rate Y-axis: 15 m/min, total height: 1,985 mm, total length: 2,680 mm, total width: 1,950 mm, bar diameter (max.): 45 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, FANUC 31iT Plus CNC control iManual Guide 15" TFT Touch Screen 2 SAUTER turrets with 12 positions for radial VDI 25 driven tools Y-axis travel: +40/-30 mm Main and counter-spindle power: 15 Kw Main and counter-spindle nose: ASA 5" Bar capacity: 45 mm CE marking MACHINE COMPLETE WITH: - Chip conveyor Guedpfszcfb Dex An Eei - 2 high-pressure coolant pumps (14 bar) - Installation materials - Part washing gun - 3D machine model in .stp format - INDUSTRY 4.0 READY package - Part catcher for bar machining - Bar feeder interface - Machine status lamp - Tool load monitoring - MARPOSS tool pre-setter - 2 foot pedals for opening/closing the main and counter-spindle - 2 pumps for high-pressure coolant (24 bar) - Electrical cabinet air conditioner

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, For sale is a powerful and precise CNC lathe EMCO TURN 365 / E65, manufactured in 2007. The machine is equipped with a Siemens control system, powered tools on all 12 stations, a C-axis, a tailstock, and a matching EMCO COMPACT LOAD E65 short bar loader. The machine is in well-maintained condition and is ready for immediate use. Technical data: Manufacturer: EMCO MAIER Machine operating hours: 17,842 h Production operating hours: 3,369 h Model: EMCOTURN 365 / E65 Year of manufacture: 2007 Control system: SIEMENS Working area & travels: Travel X: 210 mm Travel Z: 610 mm C-axis: 360° (resolution 0.001°) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm Diameter over bed: ø 600 mm Max. bar diameter: ø 65 mm Main spindle: Speed range: 60 – 4,200 min⁻¹ Drive power (100% / 60% ED): 15 / 18 kW Guodpfxoz Aknhs An Esi Max. torque: 192 Nm Spindle connection: KK 6 (DIN 55026) Tool turret: Type: 12-position VDI 30 axial turret Powered tools: Yes, on all 12 stations (for milling & drilling) Accessories & equipment: Automation: Short bar loader EMCO COMPACT LOAD E65 Tailstock: Hydraulically operated (500 mm travel, MK4) Chip conveyor: Included Measuring arm: Tool setting measuring arm directly in the working area Part catcher, storage at chip conveyor Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). Godpezcplyofx An Eeui - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, battery capacity: 200 Ah, battery voltage: 24 V, tire condition: 100 %, High-lift pallet truck, reach truck Load capacity: 1500 kg Lifting height: 3000 mm Length: 1720 mm Width: 805 mm Height: 2040 mm Mast type: Duplex Gjdjui Rbbopfx An Eeui Dead weight: 590 kg Fork length: 1150 mm Year of manufacture: 2026 Operating hours: 0 Condition: new Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24 V Immediately ready for use Available immediately!