Screw compressor S016718

Kaeser AIRCENTER SM10

Condition: excellent (used), functionality: fully functional, General information: Oil-lubricated screw compressor for compressed air supply. Technical data: Drive motor: 5.5 kW Max. operating overpressure: 8.0 bar Rated speed: 2950 rpm Operating voltage: 400 V, 3-phase, 50 Hz Rated current: 14 A Ambient temperature: 3–45 °C Bsdpfx Aoxzuhcskxowl Option: K1_T2_C48 Refrigeration dryer: Model: ABT 15 Material no.: 1.8102.5 Max. operating overpressure PS: 16 bar / 230 psig Compressed air inlet temperature: 3–60 °C / 37–140 °F Ambient temperature: 3–45 °C / 37–115 °F Refrigerant system: Refrigerant: R-513A Quantity: 0.35 kg / 0.77 lb Global warming potential (GWP): 631 CO₂ equivalent: 0.221 t / 487 lb Max. operating overpressure HP PS: 21 bar / 300 psig Max. operating overpressure LP PS: 16 bar / 230 psi No options

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Bjdsv S U Izjpfx Akxjwl Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Bsdpfx Asuyk N Ijkxowl

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower Bwedpeyxpv Sofx Akxsl 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 9,000 h, stroke length: 350 mm, overall weight: 8,300 kg, working width: 3,100 mm, bending force (max.): 100 t, Equipment: CE marking, A ready-to-use TRUMPF TruBend 3100 press brake from 2017, in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine features a maximum press force of 100 tons and is equipped with an advanced control system with graphical visualization. It has only 9,000 operating hours on the clock. Extra benefit: upon purchase, we offer one week of training at our facility, ensuring you can start working immediately and efficiently. Key specifications (2017 model): - Press force: 1,000 kN - Bending length: 3,060 mm - Distance between uprights: 3,384 mm - Usable installation height (+extra option): 500 mm - Controlled axes: standard 4 axes (Y1, Y2, X, R) - Backgauge system: fast and precise CNC backgauge - Control system: TRUMPF T3500T with 3D color/graphical visualization Main options and features: - Increased installation height: provides a 500 mm opening for complex/tall components - Tool clamps: hydraulic tool clamping systems for rapid setup - Bending aids: maximum two height-adjustable bending aids (lifting capacity up to 150 kg) for handling large parts - Safety system: BendGuard automatic laser field monitoring - LED lighting: LED work area lighting in front and rear - Software: DXF import for 2D programming We also provide the machine's maintenance history and an overview of replaced parts, such as the BendGuard. The last maintenance was carried out in August 2025. For further information or any questions, feel free to contact us. Bjdpfoybax Ujx Akxjwl

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. Bwjdjxw Ih Ujpfx Akxsl - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Bsdsw Ebdbspfx Akxjwl Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Bodpsvphv Tofx Akxswl Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Bwedpfx Akstwliwexel Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length: 4250mm 6-axis backgauge Work area lighting Bodpfjyvr Apjx Akxjwl Park position: 900mm Lower tool hydraulic clamping Upper tool hydraulic clamping Lower tool CNC positioning Installation height: 615mm ACB preparation