Screw compressor

Kaeser SK22

Condition: repair required (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor with defective drive motor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control - Operating hours approx. 15,933 h - Load hours approx. 7,654 h - Operating pressure 11 bar Lredezg Uh Tepfx Afujt - Delivery rate 1.67 m³/min - Drive 400 V / 11 kW - Space requirement approx. W 780 x H 1030 x D 850 mm - Weight approx. 300 kg - Compressed air tank Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant R134 A - Cooling air volume 150 m³/h - Oil-water separator

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Optionally available: Vivid OmniFow Feeder 380 30 cm stack height max. sheet width 330 mm Lrodpfx Afezbrrgjust max. sheet length 380 mm Both are available on short notice.

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Lrodpfx Afjvk R Dcoust Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. Lrjdpfx Afshwwyrsuot We always have a wide range of new and used compressors in stock!

Condition: used, Year of construction: 2021, fuel type: diesel, motor manufacturer: KTA50-G3, Field of application: Construction Empty weight: 10.500 kg Generator capacity: 1.400 kVA Dimensions of cargo space: 512 x 201 x 233 cm Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. Ljdpfxsvyn Evs Afusrt We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986 Lrodpfx Ajzktnyofuot

Condition: new, Year of construction: 2025, operating hours: 7 h, Exhibition unit – immediately available: Kaeser SK 22 T - 10 bar rotary screw compressor incl. integrated refrigeration dryer incl. SIGMA CONTROL 2 controller Year of manufacture: 2025 Operating hours: 7 hours Warranty: 12 months Ledpfx Aoznmp Ssfuort Pressure: 10 bar Rated power: 11 kW Free Air Delivery (FAD): 1.68 m³/min Noise level: 66 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 387 kg Convenient leasing options via our partner bank are available for new machines. Feel free to visit our retail store. We always stock a wide selection of new and used compressors!

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel Ljdpfxjy Ty A Se Afuort - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) Ledpfx Ajyxvwiofuort • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Lsdpfx Aoht Rl Eofuert Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm