Diesel Forklift

Kalmar DCF330-12LB

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Fpodpfx Ask Rnq Nefnec Heaters: 10.4 kW Total: 25.4 kW

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Fsdok Rnvmopfx Afnjpc Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. Fpedpfev N D Raox Afnsc The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 800/315 CDC Fodpfxer Nf R Ie Afnopc Closing 80 tons Year 1997 Scrow 40 mm distance between tie bars 37x42

Condition: good (used), machine/vehicle number: 1710, Year of construction: 1998, load capacity: 32,000 kg, lifting height: 6,500 mm, mast type: duplex, fork length: 2,400 mm, total length: 6,800 mm, total width: 3,200 mm, operation weight: 41,000 kg, Kalmar DCD320-12LB from Uniktruck Fpsdpfer A Hcisx Afnsc

Condition: used, functionality: fully functional, machine/vehicle number: A11300181, Year of construction: 2009, operating hours: 23,737 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, empty load weight: 67,900 kg, drive type: Diesel, Vollcontainer Reachstacker Fpedpfx Afsw Ai Ipsnsc Chassis Number: A11300181 Transmission: Dana TE32 Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Pneumatic Rear Tyre Type: Pneumatic Description:

Condition: used, functionality: fully functional, machine/vehicle number: FN382800, Year of construction: 2008, load capacity: 2,500 kg, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, Equipment: CE marking, cabin, lighting, sideshift, Jungheinrich TFG 425 – Stivuitor pe gaz (LPG) 2,5 t Date tehnice principale: Producător: Jungheinrich Model: TFG 425 Tip acționare: Gaz petrolier lichefiat (LPG) Capacitate nominală de ridicare: 2.500 kg Centru de greutate al sarcinii: 500 mm Înălțime maximă de ridicare: 5000 mm Catarg: triplex Înălțime catarg coborât: [valoare exactă mm] Înălțime catarg extins: [valoare exactă mm] Transmisie: hidrodinamică automată pentru manevrare lină Viteză de deplasare: până la 19 km/h (cu / fără sarcină) Rază de bracaj: [valoare exactă mm] Greutate proprie: [aprox. 4.000–4.500 kg, în funcție de configurație] Motor și performanță: Tip motor: Industrial pe gaz (LPG), 4 cilindri Putere nominală: aprox. 44–55 kW (în funcție de serie) Sistem de răcire: cu lichid, pentru utilizare intensivă Fpedpfx Afjw U Snnensc Consum redus de combustibil și emisii scăzute, conform normelor europene Echipamente și dotări: Cabină ergonomică, cu vizibilitate optimă pe toate direcțiile Volan și pedale dispuse ergonomic pentru confort maxim al operatorului Sistem hidraulic de înaltă precizie pentru ridicare și manipulare eficientă Frâne de serviciu cu acționare hidraulică și frână de parcare mecanică Protecție superioară a operatorului (ROPS/FOPS) conform normelor de siguranță Pneuri [pneumatice / superelastice – specifică tipul] pentru utilizare [exterior/interior] Avantaje operaționale: Construcție robustă, fiabilă și adaptată pentru lucru intensiv Ideal pentru aplicații logistice, depozite, hale de producție și utilizare exterioară Întreținere facilă datorită accesului rapid la componente Cost total de operare redus prin eficiență energetică și durabilitate

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 18,917 h, load capacity: 25,000 kg, lifting height: 4,140 mm, fuel type: diesel, mast type: simplex, construction height: 3,830 mm, fork carriage width: 2,900 mm, fork length: 2,800 mm, empty load weight: 33,900 kg, total length: 6,350 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 110 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Fpjdpfju Dzafsx Afnec Front tires size: 14.00-24 Rear tires Type: Air Rear tires Size: 14.00-24 Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DCD 250-12LB P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab,