Diesel Forklift

Kalmar DCG 160-12

Condition: used, functionality: fully functional, machine/vehicle number: B40400483, Year of construction: 2018, operating hours: 8,889 h, load capacity: 17,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, gearing type: automatic, total height: 3,695 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, lighting, seat heater, DCG160-12 with a lifting capacity of 17,000 kg. Hfodpfx Afozucv Uo Aek

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Hfodjw A Iiljpfx Af Ajk Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: used, machine/vehicle number: B40402121, Year of construction: 2023, operating hours: 4,042 h, load capacity: 16,000 kg, lifting height: 5,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, fork carriage width: 2,500 mm, fork length: 2,600 mm, turning radius (outer): 5,175 mm, front tire size: 12.00 x 20, rear tire size: 12.00 x 20, total height: 4,195 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, lighting, DCG160-12 Hsdpfxjzucqlo Af Aefk B40402121

Condition: used, functionality: fully functional, machine/vehicle number: B40402120, Year of construction: 2023, operating hours: 5,056 h, load capacity: 16,000 kg, lifting height: 5,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, fork carriage width: 2,500 mm, fork length: 2,600 mm, turning radius (outer): 5,175 mm, front tire size: 12.00x20, rear tire size: 12.00x20, total height: 4,195 mm, Equipment: CE marking, UVV, air conditioning, cabin, centralized greasing system, lighting, B40402120 DCG160-12 Hsdpfx Aozucn Rof Asfk

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Hfjdpsnah Tdefx Af Aek

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 375 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 25,200 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Hjdpezk R Hyefx Af Aefk Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG160-12. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly offer your vehicle for consignment sale at our location. Side shifter, fork positioner Fork positioner opening range: 700 / 2360 mm Heater, full cabin, full free lift

Condition: used, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,540 mm, total length: 8,090 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 Hfsdpfx Aexd Hk Iof Aok · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräde · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Hfodpfoyn Em Rjx Af Aok Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 155 h, load capacity: 16,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,695 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,680 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,450 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Hfjdpfjzq H U Hsx Af Ajk Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG160-12. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner, Heater, full cabin, air conditioning.

Condition: used, Year of construction: 2025, lifting height: 4,500 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 16.000 kg Please contact Sales Team for more information Hedpfxeznw E Ds Af Aofk

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Hedsw Syv Uepfx Af Ajfk Operating hours: 4261 h

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 27,229 h, load capacity: 16,000 kg, lifting height: 3,030 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 2,600 mm, fork length: 2,500 mm, empty load weight: 23,120 kg, total length: 5,575 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 1200 Hfsdpfxezk R H Ts Af Aok Fork width: 250 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG 160-12. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom modifications for forklifts weighing 8 tons and above. We would also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner Fork positioner opening range: 700 / 2395 mm Heater, full cabin

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Hedpfx Aeyuhr Aef Asfk Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Hfodpfsyid Iyex Af Aek Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: good (used), machine/vehicle number: 3440, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 23,880 kg, additional equipment features: Dual tread, Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Hfsdpfsyuihljx Af Aek