Diesel Forklift

Kalmar DCG160-12 TRIPLEX

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 62 h, load capacity: 16,000 kg, lifting height: 5,500 mm, free lift: 1,830 mm, fuel type: diesel, mast type: triplex, construction height: 3,465 mm, power: 188 kW (255.61 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 mm Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Front tires condition: New Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Rear tires condition: New Description: NEW MACHINE - immediately available! NEW TRUCK - ready for pick-up! Side shifter, fork positioner Increased lifting capacity to 17,000 kg! 3rd hydraulic valve, 4th hydraulic valve KALMAR fork positioner with side shifter, fork carriage with central level compensation, width = 2,500 mm Kalmar EGO comfort cab with ECC air conditioning, fresh air filter, tinted windows, air-suspended driver's seat with leather reinforcement Grammer Actimo XL Radio with RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V voltage converter incl. 2 x 12V and 2 x 24V sockets Load indicator in the display Travel direction switch on the lift hydraulic lever Protective grille for overhead window Pressure accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt: 14° forward, 10° backward Adjustable LED beacon Kalmar fork blades Fork length: 2,400 x 250 x 100 mm Raised air intake for air filter incl. pre-separator Mudguards on drive axle, mudguards on steering axle Anti-slip coating on front fenders and tank 2 additional LED headlights in the mast below the standard headlights 2 additional LED headlights on the front cab corners facing driving direction Electric cab pump Blue Spot rear warning light Automatic central lubrication system on the steering axle and at the fork carriage/mast Fsdpfjzwrg Iox Am Esgi Fire suppression system Front and rear view cameras with color monitor in the cab

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Fgedpfev Tctusx Am Eei

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm Fgedpfx Aowh Dlmsm Eei CBN *

Year of construction: 2023, condition: new, Field of application: Construction Width: 328 cm Attachment suited for: Loaders Bucket volume: 5.2 m^3 Galen Group is the OEM bucket manufacturer. We can produce every type of bucket according to every model-brand machine. Machine Model: Volvo L150 Edge Type: Straight Fgedpfx Amon Tm Rpo Esi Edge Length: 3280mm Capacity: 5.2m^3 For detailed information and inquiry, please contact us

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. Fgedpfjtpu Szex Am Eei - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: good (used), functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale used Mori Seiki NHX5000 horizontal machining centre in excellent condition. Model: NHX-5000/40 Year: 2012 The machine is available on site by prior arrangement. Fjdpfx Amsuf S Rze Eogi Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible. Fgsdpfx Amszhnrbo Esi

Condition: ready for operation (used), Year of construction: 1998, Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment. Fsdpoyzh A Nofx Am Eegi

Condition: used, Year of construction: 2005, Mikron UCP1350 Available immediately! Travel: X-axis: 1,350 mm, Y-axis: 1,150 mm, Z-axis: 895 mm A-axis: degrees NC rotary table: 1.100 x 1.000 mm max. table load: 1.600 kg Spindle mount: HSK-A63 tool magazine: 60 seats Spindle speed: 15.000 U/min Control: Heidenhain iTNC530 Internal coolant supply (IKZ): 40 bar Fgjdpfozycl Hox Am Eoi

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table Fsdpfx Aoyqtnnem Esgi The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team