Full-container reach stacker

Kalmar DRG450-65S5

Condition: used, Year of construction: 2024, load capacity: 45,000 kg, lifting height: 15,100 mm, - Reachstacker für die Handhabung von Containern - Kapazität: -> 8'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 8'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 8'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 9'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3-high - Mast: langlebiger und geschweißter 2-stufiger Duplexausleger mit Kasten- und Teleskopausführung - Zwei Hubzylinder im Fahrgestell/Ausleger und ein Ausschubzylinder im Ausleger, Ausfahrhub von 7.000 mm für die Handhabung von bis zu 3 Reihen tief, normale Auslegerspitze - Toplift-Spreader für den Containerumschlag, maximale Tragkraft 45 Tonnen, teleskopierbar 20ft-40ft, 2 hydraulische Rotationsmotoren und 2 hydraulische Rotationsbremsen, für dauerhaftes und sicheres Handling - Seitenverschiebung ± 800 mm (insgesamt 1.600 mm) - Mechanische Pfahlneigung ± 5 Grad (Seitenneigung / Nivellierung durch Schwerkraft) - Motorische Drehung Grad - Endträger mit 4 starken Hebehaken für Schlingen (4 x 12,50 Tonnen Tragkraft), aber max. 45 Tonnen - Sicherheitsverriegelung mit 4 Ausrichtungsstiften und 4 Sensoren, montiert in Twistlock-Endträgern - An der Auslegernase montierte LED-Anzeigetafel für den Containerumschlag - In der Kabine montiertes LED-Head-Up-Anzeigedisplay für die Containerhandhabung - Motor: Dieselmotor Volvo TAD1181VE6 - 6-Zylinder-Reihenmotor, Turbolader und Ladeluftkühlung, Volumen 10,84 Liter - Leistung, Nenn-/Maximalleistung: 265/265 kW bei 2100 U/min - Drehmoment, max.: 1785 Nm bei 1400 U/min - Ölwechsel nach 1.000 h und Filterwechsel nach 1.000 h (ohne Ölprobenentnahme) - Getriebe Dana TE30510 - Automatische Lastschaltung und hydrodynamischer Drehmomentwandler - Sperrschutz für Fahrtrichtung – vorwärts/rückwärts. - Steuerung und Überwachung: Elektronischer CanBus. - Gänge: vorwärts 5 – rückwärts 3. - Kabine: Alle Schalter in der Kabine sind mit LED-Leuchten ausgestattet - Head-Up-Display in LED zur Drehverriegelungsanzeige. - 2 x 24-V-Steckdosen in den Türsäulen - Sitz Gammer Actimo XL, mechanische Feder, 3-Punkt-Sicherheitsgurt und hohe Rückenlehne, Kopfstütze - Elektrisch verstellbare Armlehne rechts. - Getönte/laminierte Fenster inkl. Schiebefenster in linker und rechter Tür - Scheibenwischer vorne (doppelt), hinten und Dachfenster - elektronisch gesteuerte Heizung/Lüftung inkl. Klimaanlage und Frischlufteinlassfilter, ausgeschaltet bei offener Tür - Komplette Türen mit Griff, Schlüsselschloss und Luftklappe (links und rechts) Dkedpfx Ajy Hmf Tjnwel - Komplettes Manövriersystem rechte Konsole inkl. Standarddisplay (elektrisch verstellbar), Multifunktionshebel linke Seite. - Verstellbare Steuerung, Lenkradkonsole und Schalterfelder - Ergonomischer Joystick für Ausleger- und Anbaugerätefunktionen - Geschwindigkeitsregelpedal rechte Seite, Bremspedale linke und rechte Seite - Lenkrad mit Lenkradknauf. Sicherheitsübersteuerung für Hydraulikfunktionen (per Code) - Radio, MP3, USB, AUX, Bluetooth, Freisprechfunktion, RDS - 24/12-V-Konverter einschließlich vier 20-Ampere-Steckdosen an den vorderen Kabinenpfosten. 1 x 12-V-Steckdose, 2 x 5-V-USB-Steckdosen und 2 x 24-V-Steckdosen - Kalmar-Lenkachse mit doppelten Drehlagern, mechanischen Seitenanschlägen (±3 Grad) und elektrischer Servolenkung mit doppeltwirkendem Zylinder ermöglicht einen kleinen Wenderadius. - Hochleistungsantriebsstrang...

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm Djdjylw Stepfx Anwokl • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: good (used), machine/vehicle number: 3519, Year of construction: 2023, load capacity: 45,000 kg, lifting height: 15,260 mm, mast type: telescopic, total length: 12,000 mm, total width: 4,250 mm, operation weight: 79,690 kg, additional equipment features: Engine heater, Centralized greasing system, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRG450-65S5XE from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Dedpfxsyuimhj Anwskl Wheel size – Drive wheel: 18.00x33 Wheel size – Steering wheel: 18.00x33

Condition: good (used), machine/vehicle number: 3059, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,380 kg, additional equipment features: Radio Control, Front mud guards, Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-R25 Wheel size – Steering wheel: 18.00-R25 Dodjyuh Iwepfx Anwekl

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm Dedpfx Aoycuuyonwekl • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: good (used), machine/vehicle number: 3058, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,400 mm, total width: 4,260 mm, operation weight: 70,740 kg, additional equipment features: Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Dkodpfx Asyuh Iqonwol Wheel size – Steering wheel: 18.00-25

Condition: good (used), machine/vehicle number: 3057, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,860 kg, additional equipment features: 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Rear mud guards, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Dkedpfeyuh Iksx Anwel Wheel size – Drive wheel: 18.00-R25 Wheel size – Steering wheel: 18.00-R25

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump Dkedpjun Rqgefx Anwjl HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: good (used), machine/vehicle number: 3056, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,400 mm, total width: 4,150 mm, operation weight: 70,940 kg, additional equipment features: Radio Control, Dual tread, Hydraulic sliding cabin, Front mud guards, 30ft autostop, Rear mud guards, Automatic Greasing System for spreader and inner boom, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Wheel type – Drive wheel: Pneumatic Dkodpeyuh Idofx Anwjl Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25

Condition: good (used), machine/vehicle number: 3055, Year of construction: 2016, load capacity: 45,000 kg, lifting height: 15,100 mm, mast type: telescopic, total length: 11,600 mm, total width: 4,190 mm, operation weight: 70,820 kg, additional equipment features: Hydraulic sliding cabin, Front mud guards, Rear mud guards, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25 Dksdpfoyuh H Tex Anwjl

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Dkjdpfx Anehtrdyjwjl Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking chuck Erowa IST, Hirschmann, 3R Warranty 12 months Transport commissioning on site training

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 17,846 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, power: 210 kW (285.52 HP), empty load weight: 70,260 kg, drive type: Diesel, Full container reachstacker Dkjdpfx Ajyuz Rlsnwsl Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tires type: Air Front tires Size: 18.00-25 Front tires Condition: 0 - 20% Rear tires Type: Air Rear tires Size: 18.00-25 Rear tires Condition: 20 - 40% Description: Front work lights, heating, full cab, air conditioning, CE certificate, dual tires, exterior mirrors, LED, seat,

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 231 kW (314.07 HP), empty load weight: 69,500 kg, drive type: Diesel, Full Container Reachstacker Chassis number: 0 Transmission: Dana / HVT R2-851 Condition: New unit Technical condition: New Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: Dksdpfx Anjw A Tw Uewjl

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Technical specifications: Grinding diameter: 300 mm Dodox A Dfyopfx Anwjkl Grinding length: 1500 mm

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 285 kW (387.49 HP), empty load weight: 76,300 kg, drive type: Diesel, Full Container Reachstacker Chassis number: 0 Transmission: Dana TE30510 Condition: New equipment Technical condition: New Front tire type: Pneumatic Dedpfxjw A Txfe Anwskl Rear tire type: Pneumatic Description: