Measuring system

KEYENCE VL-770

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable Psdey Eglqopfx Amijgk TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 Podeim Si Aspfx Amiegk We can offer you this robot overhauled too!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) Pgedpfow Rdvvjx Amiok • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath Pedpjlb I Dasfx Amiogk - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Pjdpeiryyasfx Amiogk Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Pjdpsw Ebdbsfx Amiogk Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: excellent (used), Year of construction: 2018, Extremely fast and precise inspection for high-volume production Z resolution 0.5 µm Z range Up to 30 mm (1.2") Angled view cameras Number of megapixel cameras 8 Orthogonal camera Resolution 10 µm Field of view 50mm x 50mm (2" x 2") Inspection speed Up to 65 cm2/s Software User interface Viscom vVision/EasyPro SPC Viscom SPC (statistical process control), Pgodewkfuujpfx Amisk open interface (optional) Verification station Viscom vVerify/HARAN Remote diagnosis Viscom SRC (software remote control) (optional) Programming station Viscom PST34 (optional) System computer Operating system Windows® Processor Intel® Core™ i7 PCB handling PCB dimensions 508 mm x 508 mm (20" x 20") Transport height 850 - 950 mm ± 20 mm (33.5" - 37.4" ± 0.8") Width adjustment Automatic Transport type Single track transport PCB clamping Pneumatic Upper transport clearance 50 mm (2") Lower transport clearance 45 mm (1.8"), up to 85 mm (3.3") optional; 40mm (1.6") with PCB support Other system data Positioning/handling unit Synchronous linear motors Interfaces SMEMA Power requirements 400 V (other voltages on request), 3P/N/PE, 8 A, 4 - 6 bar working pressure System dimensions 994 mm x 1565 mm x 1349 mm (39.1" x 61.6" x 53.1") (W x H x D) Weight 720 kg (1587 lbs

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of construction: 2005 TECHNICAL DATA: Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse: (X/Y/Z): 50 m/min. Speed range: 10,000 1/min. Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool places: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (LxWxH): 9.200 x 4.900 x 3.920 m Pgedpfx Amsv Nhyleijk Equipment features: Internal cooling (IKZ): bar Chip conveyor High pressure pumps

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Traceability package Pgedpsvfpmlsfx Amisk Ask for additional information!

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Pgjdpfxexrf Iue Amijk