Cone crusher

Kleemann MCO 90i EVO2

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Cjdpjwxmb Eofx Ah Ieha Delivery time: immediate.

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. Chodsuc Tzvspfx Ah Isa From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Jaw gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty 1 year, up to a maximum number of operating hours from the start of operation Technical data: Jaw crusher 1020 x 700 mm Crushing gap from 45 to 180 mm Hopper 5 m³ - 2000 x 3960 mm Two-deck vibrating screen 1020 x 1800 mm Cedpfx Ahjhd I Rzj Isha Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 12900 mm Transport width: 2530 mm Transport height 3200 mm Further information: Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good

Condition: new, functionality: fully functional, power: 5.7 kW (7.75 HP), gearing type: hydrostat, color: green, overall weight: 1,995 kg, lifting power: 2,820 kg/m, lifting height: 8,700 mm, tire size: Rubber tracks, tire condition: 100 %, Year of construction: 2021, operating hours: 2 h, Equipment: additional headlights, hydraulics, onboard computer, === KEY SPECIFICATIONS === Year of manufacture: 2021 Operating hours: 2 h Max. lifting capacity: 2,820 kg Max. lifting height: 8.7 m Jib reach: 8.205 m Drive: Fully electric (lithium-ion battery) Remote control: Yes (wireless radio remote control) Jib: Included Attachments / extra equipment: Searcher hook, multi-position outriggers, programmable moment limiter Tyre type: Rubber tracks Track condition: Excellent / like new Weight: 1,995 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Fully electric zero-emission spider crane Lithium-ion battery with fast charging Continuous operation while charging Compact and lightweight design Multi-position outriggers Wireless remote control Eco working modes Chsdoyidbmopfx Ah Iea === CONDITION === Excellent working condition (new) – fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price €81,500 (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: used, mileage: 552,546 km, power: 353 kW (479.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 5,550 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,200 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Differential lock - Remote central locking - Lift axle - Towing jaw (Maulkupplung) - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Remarks = HMF 8520 OK6 Scanreco radio remote control. 4 x hydraulic outriggers. 6 x hydraulic extensions. Winch: 2,500 kg. 4.48 m – 16,030 kg 6.33 m – 11,100 kg 8.23 m – 8,310 kg 10.23 m – 6,520 kg 12.33 m – 5,300 kg 14.51 m – 4,440 kg 16.75 m – 3,820 kg Adjustable fifth wheel. Chsdjw Dr H Repfx Ah Ioa Stainless steel toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Tyre size: 315/70R22.5; Twin tires; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Front axle 3: Tyre size: 385/55R22.5; Steering; Tyre tread left: 60%; Tyre tread right: 60% Weights Kerb weight: 25,390 kg Payload: 11,110 kg Gross vehicle weight: 36,500 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: TGX 37.480 8x2-6 / HMF 85 t/m CR = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps. Cedjrq D Nispfx Ah Ijha

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !! Codegwlrdspfx Ah Ijha

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes Cjdpeya Ag Sefx Ah Isha * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Chedsxl S Uhepfx Ah Isa

Condition: new, Year of construction: 2025, Genie GR20 Runabout vertical mast work platform, new, used, demonstration machines available Cedpfx Ahsrh D R Ae Ijha