Sandblasting Machine

KLEIN (Druckstrahlanlage) DS 1250

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Chip conveyor - Laser light for cutting line display - Micro-dosing device - Powered chip brush Godpfx Ahjwvl Ewe Eskd - Clamping pressure regulation in the control panel - Fully automatic sawing process after entering the length and number of pieces - Operating instructions Operating hours: 3480

Condition: new, Year of construction: 2025, Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be carried out by spraying, flooding (injection flood cleaning) and ultrasonic action. basket can stand, swivel or rotate during the cleaning process (preselectable via the program) Gjdohu Sg Iopfx Ah Eekd Drying with hot air and vacuum drying Basket useful dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg loading table in front of the unit included control: Siemens S7-1200 with 20 programs

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Gsdpfxefy T Sps Ah Eekd You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed Gkjdpfxov Idalj Ah Esd 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Gksdpfeucdqnjx Ah Esd Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer Gkjdpet Hdh Nefx Ah Eed 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: new, Year of construction: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin from the year of manufacture 2018. The unit is in its original packaging and is available in our warehouse. You are welcome to arrange an on-site viewing appointment by prior telephone arrangement. Gsdpfsl D Ex Dsx Ah Eekd

Condition: excellent (used), Year of construction: 2020, READY TO USE IMMEDIATELY! Godpfjhg Ugiex Ah Ejkd This degreasing system operates under vacuum with modified alcohol. Degreasing of metal components contaminated with oil and chips from machining. Suitable solvents: modified alcohols Class AIII hydrocarbons (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Lubrication Corrosion protection (spraying) Cartridge filter Very good condition (system has been used very little) 6-month warranty From Service Metalclean AG System processes: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket dimensions: 480 x 320 x 200 mm (h) Maximum load: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Connected load: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Gkedpfxjt I Ec De Ah Ejd Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Gkodpfewr Dv Hsx Ah Eod