Heat exchanger

Klingenburg RRSE 4066/2750

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg Iiodpfx Abjx Ein Ssgja - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Iodporq Ebfsfx Abgeia Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features Iedpfx Abjwgwlksgsia ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled complete with boiler, stocker unit, and discharge system Iijdpfx Abov Ngq Asgsa

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Ijdpfxolxyhfj Abgeia Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,300 mm, total length: 1,300 mm, total height: 2,450 mm, type of input current: three-phase, Powder paint booth, suction wall TQ2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (width) x 2450 (height) x 1300 depth Ijdpjd S N Szofx Abgoia SPECIFICATION: • Fan power 2.2 kW, • Efficiency 10,500 m³/h, • 3 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Booth available immediately (Stock status) CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products are EC certified. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Year of construction: 2021, condition: new, machine/vehicle number: 2021041406, Aluminium inclined conveyor belt with substructure dim: approx. 2000 + 2000mm Discharge height: 1600mm ( example ) Height of the horizontal area 200mm ( example ) Conveyor belt green, 2-ply especially cross-stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive, motor control optional stainless steel hopper - material feed Iisdpfx Aog Ez I Hsbgea

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Iedpsfzrgyefx Abgeia

Condition: used, Year of construction: 2014, workpiece weight 300 kg workpiece length 1260 mm diameter 99999 mm Like new Iiodpfsyrtw Eex Abgea CAB820

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Iiodpfeylin Hjx Abgja