Other containers

Langen Klappbodenbehaelter 950

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) Hfodpfx Afeua D Alekjb removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: ready for operation (used), functionality: fully functional, warranty duration: 6 months, Price availble for below configuration : Top Freezer AHT Kinley or Epta 250 combined with not-refurbished horizontal cabinet AHT Miami, but tested and complete grid system inside (shelves and dividers), glass lid seals changed Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Hedporhwuwsfx Afkofb Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t Hfedpfxjcxxu Ds Afkjb dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: used, plate width 2510 mm plate depth 5135 mm plate height 345 mm weight ca. 10 t required space 2,5 x 5,1 x 0,38 m Hfjdehpvavjpfx Afkob

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l Hfjdpfx Afjgvqz Isksb

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,823 h, 1. Basic information about the machine • Model: EOS M400 • Manufacturer: EOS GmbH • Year of manufacture: 2015 • Laser operating hours: 8823h • Total exposure time: 612h • Condition: little used, training machine, last maintenance July 2024 2. Technical specifications • Installation space size: e.g. B. 400 x 400 x 400 mm • Laser: type & power (1,000 W fiber laser) • Material compatibility: aluminum - license available Hfodsv Hqhgepfx Afkeb • Layer thickness: 90 µm 3. Accessories & equipment • Powder handling system: sieve module, suction station, lifting trolley • Filters & maintenance units: available • Additional construction platforms: 4 pieces • Cooling or additional equipment: air/water cooler, as good as new (01/201) • Material: 100kg AlSi10Mg included 4. Location & transport • Location: Villach, Austria • Availability: Immediately • Transport: Transport & dismantling are the responsibility of the buyer • Inspection: possible on site

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, ACCESSORIES Cooling / Coolan System Sí / Yes Internal Cooling / Coolan Through Spindle Yes / Yes Hodpfx Aoulwy Aefkefb Handwheel / Handwheel Yes / Yes Heidenhain Tool Probe / Tool Probe Heidenhain Yes / Yes Preparation for Renishaw Touch Probe / Preparation Renishaw Touch Probe Yes / Yes Integral Splash Guard / Integral Splash Guard Yes / Yes Chip Conveyor (2 Augers + 1 Lateral hinge) / Chip Conveyor (2 Chip Augers + Lateral 1) Yes / Yes Automatic Tool Changer / ATC Yes / Yes (24 tools / tools)

Year of construction: 2017, condition: refurbished (used), ROLLER CARRIAGE 3-sided CHIMNEY WOOD 155 cm 1 ROLL CARRIAGE 810 x 720 mm height approx. 155 cm Item no. RW-3155 / 3-sided other models for comparison only we produce SPECIFIC heights , repair roll containers / roll carts. Ask for specific heights Side rails in color blue, back wall blue, rolling shelves in different colors ideal for use as: firewood trolley; yellow bags; standard boxes such as E2 boxes, etc. with the dimensions 60 x 40 cm; transport trolley, magazine trolley; storage rack; etc. per rolling container: Roll shelf with 4 wheels of which 2x rigid and 2x steerable; rolling floor / rolling plate in different colors; 2 side rails 100% in order + back wall incl. 4 pcs. connecting clamps & screw material weight: approx. 27 kg/ roll cart Offer consists only of the rolling container with height 155 cm. Other trolleys do not belong to the offer (as an idea) Price per piece 69,00 € plus the currently valid VAT Hfsdpod Syhgofx Afkeb Price is per piece for purchase of 1 x rolling container Inspection after telephone arrangement possible article is optically and technically good (generally overhauled) extremely stable & loadable up to 500 kg PICKUP after notification ex STORE 47441 MOERS possible (due to high stocks, goods can be evaluated on site) Questions to this article can be answered for time reasons only with indication of your telephone number if you wish a dispatch - please announce before the purchase and discuss shipping costs Photos similar

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Hodpfx Aera N A Nofkefb Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Max. travel X-axis: 325 mm Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Hsdpfx Afewhiycekjfb Weight approx: 1200 kg colour: Light grey, dark grey, red