Diesel Forklift

Linde H25D-01/1202

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Linde H 50D-01/600 Drive Diesel Itodpsxd El Refx Ahysb Year built 2023 Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,367 h, machine/vehicle number: TRUMPF 5040 FİBER L76, laser hours: 3,715 h, laser power: 8,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, table height: 800 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, workpiece weight (max.): 4,000 kg, power: 8 kW (10.88 HP), input voltage: 400 V, compressed air connection: 6 bar, total length: 14,000 mm, total width: 8,000 mm, total height: 2,000 mm, year of last overhaul: 2022, space requirement height: 2,000 mm, space requirement length: 14,000 mm, space requirement width: 8,000 mm, working range: 20,004,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, HIGH SPEED ECO CUTTING PACKAGE DETECTLINE DROP&CUT INTEGRATED CAMERA FOR PROCESS IMAGING COMPRESSED AIR CUTTING PACKAGE TRUTOPS BOOST Itedpfxjwf Ipqj Ahyjb

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h Itedpsxz Eacofx Ahyeb - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Year of construction: 2004, condition: good (used), Newsmith Crate / Tray Washer Up to 800 crates / hour All stainless steel Wash pump with detergent or soap agent facility Rinse pump with rinse agent facility Adjustable wash temperature controls Drive conveyor with 3 speed control selector Iedpfx Ahema E Hcoyotb All safety controls and e-stops Gas burner (can be changed to oil) Complete with extractor fan Ready for use

Condition: used, mileage: 520,000 km, power: 309 kW (420.12 HP), first registration: 12/2002, fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro3, loading space length: 5,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, * Volvo FM420 Tipper Truck * First registration: 2002 * 520,000 km Itjdpfx Aowyzxnehysb * Euro 3 * 8x4 axle configuration * Leaf-leaf suspension * 44,000 kg chassis * Manual transmission * Automatic climate control * Retarder * Trailer coupling * Wheelbase: 4.30 m * Unladen weight: 14,850 kg * Tipper body: 5.90 x 2.35 x 0.90 m

Condition: used, Year of construction: 2015, fuel type: diesel, weight max. in kg 2500 kg stroke 4150 mm load center 600 mm free lift 150 mm Isdpfx Ast Symrjhyetb construction height 2814 mm fork length 1200 mm fork holder width 1150 mm Frame width 1050 mm daylight opening 110-1320 IK-IK mm

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon Ijdpfx Ahsxzziasyetb capacity 1.500-2.000 kg/h (depending on the product) machine is modular and can be shortened by ± 1/3.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: -, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 40 mm, sheet thickness copper (max.): 40 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 2,050 mm, travel distance Y-axis: 4,050 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,800 kg, power: 6,000 kW (8,157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,500 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. Itsdpfewzv E Sjx Ahyeb The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: used, functionality: fully functional, machine/vehicle number: 517327C00131, Year of construction: 2012, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,930 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: 517327C00131 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Front tires type: Superelastik Rear tires type: Superelastic Itjdou D Sqhepfx Ahyjb Description: Without fork positioner. Sideshift, 3rd valve, 4th valve,

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. Itedshwhfujpfx Ahysb The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING