Automatic frame bending machine

Lisec BSV-45

Condition: good (used), Year of construction: 1995, functionality: fully functional, input voltage: 380 V, overall weight: 1,900 kg, type of input current: three-phase, power: 10 kW (13.60 HP), Equipment: documentation/manual, Lisec bending machine BSV-45A (high speed bender with 20 seconds cycle time), 1995, including option for arc shape bending and air pressure increase fo steel bars, consisting of: BSV-45A, bending machine Dcjdpfx Aertpizeffef APM-45, endless connecting device PM-45/4, 4-slot spacer bar magazin high speed bender 20 seconds cycle time including option for arc shape bending including option for air pressure increase to run steel bars including preparation for printer signal with frequency converter for 2 different speeds of profile saw The machine can handle aluminium spacer bars as well as steel profiles The machine is in full working order and comes with one bending tool for 16 mm aluminium/steel spacer bars.

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 Dcjdpfx Aoxguqnoffsf 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, input voltage: 415 V, overall weight: 2,960 kg, power: 5.5 kW (7.48 HP), Lisec spacer bar bending maching BSV-45A, year 1996/2007, needs small repairs but is fully functional modified by Lisec in year 2007 to bend additionally stainless steel profiles (Nirotech, Chromatech Plus), electronic clamping pressure regulator for different material thicknesses. Last company was also bending TGI by using standard aluminium tools..... Machine is coming with bending tool for 16 mm aluminium Minimum frame size: 250 x 80 mm Dodortpuzepfx Affecf Maximum frame size: 4000 x 2200 mm (split frame) Profile widths: 6-24 mm Running direction: left/right Power supply: 3/N/PE-50Hz-415V, 24VDC control voltage Shapes: according Lisec shape catalogue, including arc shapes (for aluminium only) 4-slot spacer bar magazin PM-45/4 Machine is complete and was in full operation unit dismantling During transportation small damages happend..... Can be seen in our warehouse in Hofkirchen/Austria on appointment

Year of construction: 1991, condition: good (used), machine/vehicle number: 154.03.10.01.0291, Giętarka do ramek dystansowych Lisec BSV-45 wraz z podajnikiem do ramek oraz drukarką. Min. wymiar ramki: 250 x 150 mm Dcsdsg D Hdpjpfx Affjf Max. wymiar ramki: 3000 x 2200 mm Napięcie: 380-3/N~50Hz Złącze: 10 kW Ciśnienie: 6 bar Waga: 1125 kg Gwarancja rozruchowa.

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary. Dedpeftdv Ujfx Affocf

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Dcedpeqhugfsfx Affsf

Condition: used, Year of construction: 2002, Frame material: stainless steel/plastic/aluminum Height: 2800mm Dcodpfow Dpx Djx Affsf Length: 14800mm Depth: 1800 mm Weight: approx. 3580kg Condition: good/second-hand

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed Dcodpfx Afswka S Iofsf - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Width: 65mm, Height: 22mm, Dodjualqkspfx Affocf Weight: approx. 20Kg,

Condition: good (used), Year of construction: 1995, Includes bending tool The machine can process: aluminium, Chromatec/stainless steel. Suitable for moulds and models. 4-compartment profile magazine. Total length: 12,000 mm Max. height: 2,760 mm Depth: approx. 2,000 mm Weight: approx. 2,500 kg Dcedpfx Afoxm Tn Eefef

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Dcodpfocrcgqex Affsf Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.