Used glass drilling machines for sale (19)

Condition: used, machine/vehicle number: 3700190, total length: 3,000 mm, total width: 1,900 mm, total height: 1,800 mm, overall weight: 1,500 kg, pressure: 6 bar, CMB Besana double-side drilling machine 70-2TC Hodsyftu Depfx Aglsh

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: GG710C-18759, total length: 2,500 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, overall weight: 850 kg, input current: 8 A, pressure: 6 bar, drill diameter: 140 mm, type of input current: three-phase, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Hjdpfx Ajyc Egyogleh

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Hsdpfx Ajyfrvysgljh Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: refurbished (used), Year of construction: 2008, operating hours: 20,000 h, functionality: limited functionality, total length: 12,000 mm, total width: 11,000 mm, input voltage: 400 V, pressure: 8 bar, air pressure: 8 bar, input frequency: 50 Hz, type of input current: three-phase, power: 60 kW (81.58 HP), Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hodpfxexxaits Agljh

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm L = 1200 mm D = 1100 mm Hjdpfslp Iibox Agleh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Hodpeh Ek H Sofx Agljh Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Hjdpod S Uhqsfx Aglsh Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: used, Year of construction: 2001, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 526/01, input voltage: 380 V, feed length X-axis: 1,250 mm, type of input current: three-phase, Used glass drilling machine with automatic ruler. In good condition. Hjdpsx Rp Rgjfx Agleh

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 In good condition. With ball roller table, cross laser and infinitely variable speed control. Incl water cooling Hedpfx Ageq Umcneloh

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5976/07, total length: 2,500 mm, total width: 1,850 mm, total height: 1,750 mm, input voltage: 380 V, working height: 1,000 mm, overall weight: 420 kg, pressure: 6 bar, drill diameter: 130 mm, input frequency: 50 Hz, power: 2.5 kW (3.40 HP), Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Hedpfoxg Ngqox Aglsh

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Hsdet Aifxjpfx Agljh Working height: 1030 mm, Height: 1680 mm, Depth: 1800 mm, Width: 2450 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 7,100 mm, total width: 2,300 mm, total height: 3,270 mm, input voltage: 400 V, working height: 800 mm, overall weight: 2,300 kg, input current: 40 A, input frequency: 50 Hz, power: 16 kW (21.75 HP), Equipment: documentation/manual, Perfectly working machine. Hodpfx Agox Dl U Esleh

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm Hjdperg E Hcjfx Agljh maximum measurement machine frame to drilling center:

Year of construction: 2023, condition: as good as new (ex-display), CMS Ypsos Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.200 / 4.500 / 6.000 mm Hsdpspygrasfx Agleh Max. Glas-height: 2.200 / 2.800 / 3.300 mm Min. Glas-length: 420 mm Min. Glas-height: 270 mm Thickness: 3-30 mm Options: - 2x groups of suction cups which 3 suction cups on each group - Elektrospindle 3,7 kW 0-12.000 U/Min - Materialmeasurement and Toolmeasurement system - Rotating tool magazin - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW Hjdpewd Ertjfx Agljh

Condition: good (used), Year of construction: 1994, Transport dimension: Hedpfx Agsm Rg Npsljh Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 6,400 mm, total width: 1,200 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Hedju Nw Szepfx Aglsh Working height 580 mm Year: 2007 Condition : Good used Open Top Washing height 1300 mm Brushes 4 Also available in lines with drilling machine.

Condition: used, Year of construction: 2013, 3-axis system Max. glass dimensions: 1600 x 2600 mm Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Hole/double-sided 16 compartments for 16 positions Hodpfxowmqrqs Agljh Length: 5850 mm Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table Hjdpfx Asiy Dxkegleh With manual positioning Water tank with pump included Very good and clean condition Availability immediate