Vertical glass drilling machineEXPOGLASS®
Priam
Machine data
- Machine type:
- Vertical glass drilling machine
- Manufacturer:
- EXPOGLASS®
- Model:
- Priam
- Year of construction:
- 2026
- Condition:
- new
- Functionality:
- fully functional
Price & Location
- Location:
- Złotogłowice 133, 48-300 Nysa, Polska
Technical details
- Power:
- 4 kW (5.44 HP)
- Input voltage:
- 400 V
- Input current:
- 16 A
- Input frequency:
- 50 Hz
- Actuation type:
- electric
- Rotational speed (max.):
- 3,100 rpm
- Rotational speed (min.):
- 700 rpm
- Total width:
- 1,487 mm
- Total length:
- 4,440 mm
- Total height:
- 2,793 mm
- Throat depth:
- 1,490 mm
- Overall weight:
- 1,900 kg
- Equipment:
- CE marking, documentation/manual
Details about the offer
- Listing ID:
- A7086909
- Update:
- 08.07.2026
Description
WHY THE PRIAM
The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable.
The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops.
The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass.
BUILT FOR SERIAL PRODUCTION
Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions.
Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs).
Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm).
TECHNICAL DATA
Dodpfjh Ek H Ssx Adrskp
Drilling diameter range: Ø 5–80 mm (both drills same diameter)
Glass thickness: 2–20 mm
Max. pane size: 2,000 × 4,000 mm, up to 200 kg
Support bar travel: up to 1,060 mm below spindle axis
Holes on the glass edge (half-moon): yes, position 0
Drilling program: up to 20 holes on the vertical axis
Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration
Feed: automatic, electronically controlled
Cooling: closed water circuit, approx. 30 l
Compressed air: 6 bar (pneumatic clamping)
Power supply: 400 V / 16 A / 4 kW
Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm
Weight: 1,900 kg
Scope of delivery: CE marking, documentation, operating manual
MANUFACTURER, SERVICE, TERMS
EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site.
Delivery time: approx. 8 weeks. Warranty: 12 months.
Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing.
Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.
Seller
Registered since: 2019
21 listings online
Send inquiry
Telephone & Fax
Kruševac ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw
Barbing SchiavoHydro 3000.6
Belgium INTERMACGenius 37 RSA
Szczecin LiSECKSR-25 R-L
Meerkerk DAFCF 85.460 2012 EEV 8X2 HIAB 85Tm CRANE HANDGESC...
Barakfakih PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİSÇ 502 S
Aschersleben Putsch MeniconiSVP 145 ECO
Władysławowo DIP TECHGlassJet NOVO
Velžys SCHRAMLtopDRILL 130 NC
Barbing CMSAURA
Machineseeker Trust Seal
What is the trust seal?
Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.
What do we verify?
Check of
trade licence or commercial register extract
Verification of the dealer's
postal address
Validation of the
banking details
Verification of
accessibility to
main phone number
Credit report
may not contain negative criteria
Buyer complaints
can lead to withdrawal of the sealWhat does this mean for you as buyer?
The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.