Horizontal glass drilling machine

KNOPP BOHRFIX-DSUD

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Rjdow Sdwispfx Ab Rsch Width: 1850 mm Height: 1800 mm Depth: 1200 mm

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Rcedpfsx Hff Sox Ab Roh

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel Rcsdpfx Aberhilxs Roh o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Rodpfxoxrmpms Ab Rjch Dimensions: L7000xW4030mm, weight +/-2500Kg

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm Rcedpfxowl Dkqs Ab Reh • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm • Price upon request

Condition: ready for operation (used), Year of construction: 2016, A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible. Rcodpfoyxq T Sox Ab Roh

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units Rcedpfxjrrvkbj Ab Rsh DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery

Condition: new, Year of construction: 2024, Corner Crimping Machine - Pertici HP 601, year 2024 - BRAND NEW Hydraulic corner crimping machine designed for the processing of aluminium profiles: Its cast iron and steel construction makes it robust and reliable, ensuring consistent crimping quality over time. The crimping heads are controlled by a single mechanical command, guaranteeing perfect synchronization of movements. The machine is equipped with a hydraulic clamping wedge that ensures maximum profile holding during the crimping operation. The easy adjustment of the knife blocks allows quick and efficient profile changeovers. Rjdpfx Aoy R S Uusb Rsch Technical specifications: Maximum crimping force: 3500 Kgp Maximum punching height: 120 mm Nominal pressure: 7 bar Dimensions (L x H x D): 850 x 1250 x 800 mm Weight: 300 kg

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Rsdpfx Abezkldts Rsch

Year of construction: 2008, condition: ready for operation (used), Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich. Rcedpfxswwlk Ao Ab Rjh