Low lift pallet truck

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 96101805, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 96101805 Control system: Siemens Sinumerik Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 220 V Connected power: 105 kW Rated current: 200 A Spindle and Machining Area Diameter of rotation over the bed: max. 185 mm Diameter of rotation over the compound slide: max. 185 mm Spindle bore: 205 mm Number of bed slides: 2 Number of compound slides: 2 Dodpfx Aks Ahg D Te Aocp Longitudinal travel: 800 / 2,000 mm Cross travel: 320 mm Tailstock Arbor taper: MK 5 Arbor diameter: 110 mm Manual tailstock travel: max. 300 mm Transport Transport: possible on a standard truck EQUIPMENT Chip conveyor Coolant system Loading system Large quantity of VDI tool holders VDI tool holders, some equipped with cutting tools Documentation

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, empty load weight: 265 kg, maximum load weight: 1,085 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 255 133 1350 NEW VEHICLE Internal dimensions: 255cm x 133cm Side panel height incl. railing: 43cm Loading area height: 51cm Total weight: 1350Kg Payload: 1085Kg Braked single-axle low-loader Overrun brake and parking brake by AL-KO Dedpfeghpbvsx Ak Aecp 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust screen-printed plywood side panels Steel railing Rear side panel foldable and removable with tensioning fastener 15mm thick, non-slip and robust screen-printed plywood floor Drawbar wheel 6 lashing eyes with 400Kg tensile force 14" reinforced C tires 2x U-shaped chock M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Ramps -SARIS aluminum rims -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bow -High cover 150cm or 180cm -Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document 150 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: used, functionality: fully functional, machine/vehicle number: H2Y386N00692, Year of construction: 2024, operating hours: 274 h, load capacity: 1,200 kg, lifting height: 3,745 mm, free lift: 1,868 mm, fuel type: electric, mast type: duplex, construction height: 2,496 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 3,745 mm Free lift: 1,868 mm Overall height: 2,496 mm MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Mast type: Duplex Fuel type: Electric Battery voltage: 24 V Battery type: Lithium-ion Djdpfx Ao Agrhlok Ascp Operating hours: 274 h EQUIPMENT Side shifter 3rd valve External reference: SL19455SP

Condition: used, functionality: fully functional, machine/vehicle number: FN585186, Year of construction: 2018, operating hours: 2,545 h, load capacity: 2,500 kg, lifting height: 7,700 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 7,700 mm Free lift: 2,700 mm Overall height: 3,500 mm MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Mast type: Triplex Fuel type: Electric Battery voltage: 80 V Battery year of manufacture: 2024 Operating hours: 2,545 h EQUIPMENT Side shifter 3rd valve Dcedpfj Agrf Usx Ak Aep External reference: SL18955SP

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH Compact-30 compact concrete mixing plant offers a superior solution in terms of both portability and production performance with its compact structure and high efficiency. Installation is extremely fast and requires only a flat ground, eliminating the need for additional concrete infrastructure work. This feature saves time and costs on site. Thanks to its steel-legged cement silos and metal-walled aggregate bunker system, it offers easy installation without requiring additional construction. This plant can be equipped with pan, single-shaft, or planetary mixer options, suitable for ready-mix concrete, dry concrete, and precast concrete production. The Compact 30 features a high-tech automation system with SIEMENS and SCHNEIDER branded electronic components. Thanks to its PLC-controlled, fully automatic structure, the production process is easy, safe, and uninterrupted. Its user-friendly interface provides maximum control and flexibility to the operator during production. Despite its compact structure, it offers long-term use with high quality and durability. Dcedpfsxqg Adsx Ak Ajp Compact-30 Compact Concrete Batching Plant Technical Specifications Production Capacity: 30 m³/s Transport Position Dimensions: 12 x 2.2 x 2.2 m Weight: 13 tons Total Motor Power: 50 kW Required Electric Generator: 80 kVA Mixer Options: Pan – Single Shaft – Planetary Working Area: 200 m² Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Bucket Volume: 0.75 m³ Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bin: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters – 4 kW Cement Silo: Capacity options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the Compact-30 Compact Concrete Batch Plant? CONSTMACH combines low investment costs with high production performance with its Bucket Compact 30 model, produced with years of engineering experience. It offers maximum reliability to its users with its CE-compliant production, high-quality components, and worldwide service network. The Compact 30 provides both the power of fixed plants and the flexibility of mobile systems, ensuring you get the most out of your investment in the shortest time possible. Its durability, easy maintenance, and energy efficiency offer long-term operational advantages. CONSTMACH is the right choice for professionals seeking quality and consistency in concrete production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), functionality: fully functional, machine/vehicle number: F5011924, Year of construction: 2023, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 3,300 mm, free lift: 1,540 mm, fuel type: electric, mast type: duplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,300 mm Free lift: 1,540 mm Overall height: 2,260 mm Load capacity: 3,000 kg MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Dcsdpfxo Agrf Ao Ak Aep Mast type: Duplex Fuel type: Electric Weight without battery: 3,869 kg Weight with battery: 4,882 kg Operating hours: 3 h EQUIPMENT Side shifter 3rd valve 4th valve

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 5 h, cutting height (max.): 490 mm, cutting width (max.): 750 mm, roller diameter: 540 mm, pivoting range: 60 °, Like-new machine with only 5 operating hours! TECHNICAL DETAILS Cutting width: max. 750 mm Cutting height: max. 490 mm Roller diameter: 540 mm Swiveling range: 60° Table height: 800 mm Cutting diameter at 90°: max. 540 mm Rectangular cutting area at 90°: 750 × 490 mm Swiveling range: up to 60° in both directions Saw blade dimensions: 6,880 × 41 × 1.3 mm Saw blade speed: 15–150 m/min Dodpfj Aggc Iex Ak Aecp Drive power: 5.5 kW Speed: max. 150 rpm Speed: min. 15 rpm Type of operation: electric MACHINE DETAILS Control type: PLC-controlled Input voltage: 400 V Input frequency: 50 Hz Input current type: three-phase Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,000 mm Total weight: 2,370 kg Operating hours: 5 h EQUIPMENT Lighting Documentation / Manual CE marking

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, All detailed information is in the photos. For further details, please contact us. Dcjdpfx Aow Dt Tljk Aep

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Dcsde Aggbxspfx Ak Asp Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Djdpfx Aks Agfzbs Ascp Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth Dcedsvxgm Nepfx Ak Aep • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 145078, overall weight: 4,600 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Weight: 4,600 kg EQUIPMENT Chuck Dcodpfxj Agfi Do Ak Aop Note: The machine is sold without tooling. The following technical data are based on manufacturer specifications. The seller cannot guarantee their accuracy: TECHNICAL DETAILS Swinging diameter over bed: 525 mm Swinging diameter over cross slide: 350 mm X-axis travel: 190 mm Rapid traverse X/Z: 30 m/min Main spindle speed: 35–4,000 rpm Main spindle power: 18.5 kW Spindle bore: 76 mm Bar passage: 64 mm

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Dcjdo Aaqz Tspfx Ak Asp Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Condition: excellent (used), 4 Fermentation tunnels composed of: - Serial No.: 930 fermentation tunnels: - Chamber type: BFC - Trolley dimensions: 600x800 - Number of trolleys per tunnel: 6 - External chamber width: 4,330 mm Dcsdpfewxymhox Ak Asp - External chamber depth: 5,350 mm - Usable chamber depth: 5,200 mm - Usable cell width: 1,000 mm - Door frame type: single door 1,000 mm - Evaporator side: Right - OPTICOM control - BFC electric connection: 400-440V / 3PH + N + PE / 50-60Hz - Tunnel chamber type: Yes

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm EQUIPMENT 12-station tool turret Dcodpfxoz Uwzwo Ak Ajp Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Documentation Chip conveyor Extraction system