Heavy-Duty Pallet Racking

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 96101805, No minimum price – guaranteed sale to the highest bidder! Codpfx Aj Ahg D Toktsri Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 96101805 Control system: Siemens Sinumerik Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 220 V Connected power: 105 kW Rated current: 200 A Spindle and Machining Area Diameter of rotation over the bed: max. 185 mm Diameter of rotation over the compound slide: max. 185 mm Spindle bore: 205 mm Number of bed slides: 2 Number of compound slides: 2 Longitudinal travel: 800 / 2,000 mm Cross travel: 320 mm Tailstock Arbor taper: MK 5 Arbor diameter: 110 mm Manual tailstock travel: max. 300 mm Transport Transport: possible on a standard truck EQUIPMENT Chip conveyor Coolant system Loading system Large quantity of VDI tool holders VDI tool holders, some equipped with cutting tools Documentation

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Crsdpfx Akoyldxmotji Full cab, twin tires,

Condition: used, functionality: fully functional, machine/vehicle number: H2Y386N00692, Year of construction: 2024, operating hours: 274 h, load capacity: 1,200 kg, lifting height: 3,745 mm, free lift: 1,868 mm, fuel type: electric, mast type: duplex, construction height: 2,496 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 3,745 mm Free lift: 1,868 mm Overall height: 2,496 mm MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Csdpo Agrhlsfx Akteri Mast type: Duplex Fuel type: Electric Battery voltage: 24 V Battery type: Lithium-ion Operating hours: 274 h EQUIPMENT Side shifter 3rd valve External reference: SL19455SP

Condition: used, functionality: fully functional, machine/vehicle number: FN585186, Year of construction: 2018, operating hours: 2,545 h, load capacity: 2,500 kg, lifting height: 7,700 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 7,700 mm Free lift: 2,700 mm Overall height: 3,500 mm MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Mast type: Triplex Fuel type: Electric Battery voltage: 80 V Battery year of manufacture: 2024 Operating hours: 2,545 h Codpfx Ao Agrf Ujktjri EQUIPMENT Side shifter 3rd valve External reference: SL18955SP

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Credpfx Akody Hm Dstoi Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: like new (used), functionality: fully functional, machine/vehicle number: F5011924, Year of construction: 2023, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 3,300 mm, free lift: 1,540 mm, fuel type: electric, mast type: duplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Crjdpfs Agrf Asx Aktsi Lifting height: 3,300 mm Free lift: 1,540 mm Overall height: 2,260 mm Load capacity: 3,000 kg MACHINE DETAILS ISO class: 2 (1,000–2,500 kg) Mast type: Duplex Fuel type: Electric Weight without battery: 3,869 kg Weight with battery: 4,882 kg Operating hours: 3 h EQUIPMENT Side shifter 3rd valve 4th valve

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 5 h, cutting height (max.): 490 mm, cutting width (max.): 750 mm, roller diameter: 540 mm, pivoting range: 60 °, Like-new machine with only 5 operating hours! TECHNICAL DETAILS Csdpfxs Aggc Is Aktori Cutting width: max. 750 mm Cutting height: max. 490 mm Roller diameter: 540 mm Swiveling range: 60° Table height: 800 mm Cutting diameter at 90°: max. 540 mm Rectangular cutting area at 90°: 750 × 490 mm Swiveling range: up to 60° in both directions Saw blade dimensions: 6,880 × 41 × 1.3 mm Saw blade speed: 15–150 m/min Drive power: 5.5 kW Speed: max. 150 rpm Speed: min. 15 rpm Type of operation: electric MACHINE DETAILS Control type: PLC-controlled Input voltage: 400 V Input frequency: 50 Hz Input current type: three-phase Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,000 mm Total weight: 2,370 kg Operating hours: 5 h EQUIPMENT Lighting Documentation / Manual CE marking

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. Crodpfx Aksh Ek Daotei When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Crsdpfxj Aggbxo Aktoi Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Crsdps Agfzbjfx Aktji Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 880 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,642 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,780 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load centre: 500 Fork width: 120 mm Crodpfxevuck Ne Aktsi Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Pneumatic Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre condition: 80 - 100% Sideshift, 3rd valve, rear work light, front work light, heating, full cabin, beacon,

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 145078, overall weight: 4,600 kg, No minimum price – guaranteed sale to the highest bidder! Cjdpj Agfi Djfx Akteri MACHINE DETAILS Weight: 4,600 kg EQUIPMENT Chuck Note: The machine is sold without tooling. The following technical data are based on manufacturer specifications. The seller cannot guarantee their accuracy: TECHNICAL DETAILS Swinging diameter over bed: 525 mm Swinging diameter over cross slide: 350 mm X-axis travel: 190 mm Rapid traverse X/Z: 30 m/min Main spindle speed: 35–4,000 rpm Main spindle power: 18.5 kW Spindle bore: 76 mm Bar passage: 64 mm

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Csdpfx Ako Aaqz Tjtjri Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Cedoht Hlljpfx Aktori

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Crjdpfez Uwzwox Aktoi Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm EQUIPMENT 12-station tool turret Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Documentation Chip conveyor Extraction system