Workbench approx. 2.9 linear meters, used

ONO plus VAT

€140

Condition

Used

Location

Aumühle

Workbench approx. 2.9 linear meters, used

Machine data

Machine type:: Workbench approx. 2.9 linear meters, used

Condition:: used

Price & Location

ONO plus VAT

€140

Location:: Aumühle 16, 4075 Aumühle, Österreich

Call

Details about the offer

Listing ID:: A22035673

Update:: 24.07.2026

Description

Workbench, approx. 2.9 m length, used

🧰 Product features
• Manufacturer: depending on availability
• Color: depending on availability
• Condition: used
• Frame: 2 pcs, pre-assembled, 90 cm high / 80 cm deep
• Frame width: depending on availability
• Supports: 4 pcs, with clear span of 2.1 - 3.0 meters
• Deep crossbars: not included in the price (€6.00 net per piece)
• Special features: All workbenches can be extended indefinitely, very robust and stable

Upon request, we will gladly adjust your workbench to a length between 2.3 and 3.2 meters!

💰 Price: €140.00 net, excluding VAT
• Other heights and depths: on request
• Quantity discount: on request
• Shipping costs: available throughout Europe, on request
• Delivery time: immediately available
• Inspection and collection: possible at any time by appointment

We constantly have over 5,000 m of pallet racking from numerous manufacturers in stock.

(Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.)

Lenox Trading – Top warehouse technology & heavy-duty racking, used & new
Description:
Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland).
⚡ IMMEDIATELY AVAILABLE:
• Over 10,000 meters of racking immediately available
• 20,000 m² of mezzanine floors & steel platform structures immediately available
• 30–50 semi-trailer trucks of goods turnover weekly for maximum selection
📦 OUR RANGE (BUY CHEAP ONLINE):
Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly.
🏭 TOP BRANDS, USED & FROM INSOLVENCY / LIQUIDATION:
• SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300)
• Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich)
Hodpfszath Hsx Ac Tor
• Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420
• Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra)
• Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner
🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION
For dismantling and clearance orders, we offer a complete all-round service package:
1. Lump-sum purchase: purchase of merchandise, equipment & complete stock including thorough clearance.
2. Commission auction: execution of auctions on behalf of the customer.
Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover.
Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2010

196 listings online

Call

Send inquiry

Telephone & Fax

+43 7272 ... show

These listings may also fit your interest.

Auction

Област София

9,223 km

Machining center
RapidMFC EVOLUTION II

€8,400

To the auction

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar Hodozln D Espfx Ac Tsr EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

See details

Auction

Cutting and processing center Rapid Optima VI

Област София

9,223 km

Cutting and processing center
RapidOptima VI

€11,200

To the auction

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Hedpfxjzlnxio Ac Tsr Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

See details

Auction

Cutting and processing center Elumatec SBZ 608

Област София

9,223 km

Cutting and processing center
ElumatecSBZ 608

€10,000

To the auction

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW Hedpszlnvusfx Ac Ter EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

See details

Auction

Front loader forklift Jungheinrich TFG S80GE 360ZT

Schleswig-Holstein

7,667 km

Front loader forklift
JungheinrichTFG S80GE 360ZT

€15,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Hjdpfxjzlhnqs Ac Tjr Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

See details

Auction

Laser cutting machine TRUMPF TruLaser 5030 classic

Dravograd

8,449 km

Laser cutting machine
TRUMPFTruLaser 5030 classic

€4,500

To the auction

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Hodszlhcnjpfx Ac Tjr Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

See details

Auction

Groningen

7,504 km

4-axis CNC machine
ElumatecSBZ 140

€17,500

To the auction

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Hjdpfx Aszhuyfec Tor Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

See details

Auction

Universal machining center DECKEL MAHO DMU 80 monoBlock

Baden-Württemberg

7,992 km

Universal machining center
DECKEL MAHODMU 80 monoBlock

€15,500

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Hjdpfx Acjzmry Tj Tsr Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

See details

Auction

Vertical machining center BRIDGEPORT VMC 800

Baden-Württemberg

7,992 km

Vertical machining center
BRIDGEPORTVMC 800

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Hodpfx Acozmryye Tor Operating manual

See details

Auction

Baden-Württemberg

7,992 km

Machining center
MIKRONVCP 800 W

€9,500

To the auction

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 Hedpfxezmrpuo Ac Ter MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

See details

Auction

Horizontal plate boring mill PARPAS ML 100 - 5000

Sachsen

8,028 km

Horizontal plate boring mill
PARPASML 100 - 5000

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Hjdpszlryqefx Ac Tor Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.

See details

Advertise here