Extinguishing water tank 30,000 liters storage tank

Year of construction

1997

Condition

Used

Location

Germany

Extinguishing water tank 30,000 liters storage tank

Show map

Machine data

Machine type:: Extinguishing water tank 30,000 liters storage tank

Machine number:: LWT 30

Year of construction:: 1997

Condition:: used

Price & Location

Location:: D - Nordrhein-Westfalen

Call

Details about the offer

Listing ID:: A2990726

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act

Dear Sir or Madam,
we offer a 30,000 liter storage tank for the storage of water and wastewater as follows .

This is a 30 cbm storage tank made of steel.
Material S235JRG2 steel .
Incl manufacturer certificate DIN and nameplate.

The tank is cleaned from the inside and bitumen insulated from the outside.
Suitable for underground as well as above ground storage.

Tank dimensions :
Length : approx. 9.900 mm Diameter : approx. 2.000 mm Weight : approx. 6.000 kg

Shape : cylindrical

Equipment : on request

For the use as a fire water tank an additional
suction line with A-fixed coupling according to DIN can be offered.

Of course, you can also co-design your tank system!

All our plants are extensively controlled and checked in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you.

General:

All offers are valid ex location Warstein , free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
Ffodsc Nkyhjpfx Afnou
from Warstein

Tank and environmental protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Last online: Yesterday

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Județul Dolj

9,099 km

Centerless grinding machine
Microrex1H

€29,000

To the auction

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Ffodpfoyb R R Isx Afnju Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system

See details

Listing

Untersteinach

8,000 km

Debarking machine
Wiedemann900

Call

Auction

Cylindrical grinding machine Kellenberger 600 U

Județul Dolj

9,099 km

Cylindrical grinding machine
Kellenberger600 U

€29,050

To the auction

Condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, grinding wheel diameter: 400 mm, grinding wheel width: 50 mm, grinding wheel bore: 127 mm, The motor and frequency inverter for the workpiece headstock have been replaced! Additionally, the control cabinet and wiring diagram have been renewed! TECHNICAL DETAILS Centre height: 125 mm (175 mm with riser blocks) Centre distance: 600 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Grinding wheel bore: 127 mm Swivel range: 270° Workpiece headstock speed: 20 rpm to 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel: 10° Table feed speed: up to 6.0 m/min MACHINE DETAILS External grinding wheel motor: 4.0 kW Workpiece spindle motor: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 2,580 x 1,680 x 1,670 mm Machine weight approx.: 2,700 kg EQUIPMENT New control cabinet and new wiring diagram New motor and frequency inverter for the workpiece headstock Fjdpfoyb R Nqex Afnsfu 2-axis digital readout Coolant tank Geometry according to Kellenberger protocol Extensive accessories

See details

Auction

Berlin

7,944 km

Front loader forklift
Toyota8 FBE 20 T

€6,025

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, Submission of a bid obligates timely collection by 27/02/2026! TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Ffjdpfx Aoyfpa Ajfnsu Free lift: 1,670 mm Fork length: 1,200 mm MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated sideshift Load backrest Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm

See details

Listing

EURO pallet production line ZPHU Karolex VDX3600

Brzeźnio

8,292 km

EURO pallet production line
ZPHU KarolexVDX3600

Call

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,900 mm, total height: 3,000 mm, total length: 19,500 mm, type of input current: three-phase, warranty duration: 12 months, overall weight: 13,000 kg, table width: 800 mm, The line is designed to produce EURO 1200/800 pallets . In order to nail the pallets efficiently, three people are needed to operate it: to for stacking bottoms one person and for stacking pallet tops two people. The capacity of the machine is 2500 pcs per 8h, also it depends on the workers and their speed in Ffjdpfx Aet Tbuysfnou stacking the pieces. The pallet after being nailed together is received by the milling machine, which mills the pallet, cuts the corners and burns the marks, after which the pallet enters the stacking machine, which cuts the pallet to a size of 1200, rotates it and stacks it with an elevator . Stacking can be done in a so-called sandwich (29 pieces), or individually up to (20 pieces). pieces). Behind the stacking machine is storage for three pallet poles. The line is adapted for sawdust extraction

See details

Auction

Stationary exhaust system SCHUKO Vacomat N 1000 20/50

Berlin

7,944 km

Stationary exhaust system
SCHUKOVacomat N 1000 20/50

€9,500

To the auction

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1061276, total height: 2,760 mm, total width: 1,520 mm, total length: 1,520 mm, filter area: 50 m², operating pressure: 6 bar, Submission of a bid obligates timely collection by 27.02.2026! TECHNICAL DETAILS Ffjdpfx Aeyfn Sdofnou Filter area: 50 m2 MACHINE DETAILS Control type: 24 or 230 V Opening/closing time: max. 2 s Operating pressure: 6 bar Dimensions (L x W x H): 1,520 x 1,520 x 2,760 mm EQUIPMENT Sendzimir-galvanised pipe components Shaped parts Machine connections Flame-retardant antistatic PU spiral hoses Hose cuffs Pipe clamps Mounting material for conveying chips and dust from 7 woodworking machines Pneumatic shut-off slides Slide housings made of die-cast aluminium

See details

Auction

Piston compressor Renner Riko 700/270 ECN-KT

Berlin

7,944 km

Piston compressor
RennerRiko 700/270 ECN-KT

€2,750

To the auction

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min MACHINE DETAILS Connected load: 4 kW Voltage: 400 V Fodpfjyfn Ewjx Afnjfu Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings 2 fully automatic vessel drain valves KN 1.230

See details

Listing

Mercedes-Benz Unimog FLU419 Mercedes-Benz Unimog FLU419

VELDDRIEL

7,536 km

Mercedes-Benz Unimog FLU419
Mercedes-BenzUnimog FLU419

€24,500

fixed price plus VAT

Call

Auction

Berlin

7,944 km

Fitting drill machine
GrassTECMATOR RP

€900

To the auction

Auction

Vertical panel saw Striebig C 07 yp 5207

Berlin

7,944 km

Vertical panel saw
StriebigC 07 yp 5207

€4,850

To the auction

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Fedoyfnurjpfx Afnofu Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz EQUIPMENT Electromagnetic motor brake Mechanically braked support rollers

See details

Listing

Municipal special purpose vehicle Iveco Trakker

Łaziska Górne

8,404 km

Municipal special purpose vehicle
IvecoTrakker

Call

Auction

Berlin

7,944 km

Splash back wall
FeigeSplashback

€1,900

To the auction

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm Ffedpjyfnqtjfx Afnsu EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

See details

Auction

Niedersachsen

7,728 km

CNC lathe
GildemeisterCTX 200

€4,000

To the auction

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Ffjdpjyfgttefx Afneu Tailstock Documentation

See details

Listing

PVC SINGLE HEAD PRODUCTION GROUP PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ PVC TEK KAFALI ÜRETİM MAKİNE SETİ

Minareliçavuş

9,742 km

PVC SINGLE HEAD PRODUCTION GROUP
PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİPVC TEK KAFALI ÜRETİM MAKİNE SETİ

Call

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PVC TEK KAFALI ÜRETİM GRUBU, • Enables production of 40 - 60 windows in an 8-hour work environment • Our set, which offers the most competitive price for the customer through various machine options Fjdpfx Aorc H Hfofnofu • Available in 380 Volt or 220 Volt versions • Compliant with CE (European) standards • Door-to-door pricing for worldwide delivery • References from existing customers in your country MACHINE CONTENTS • SC101 S Single Corner Welding Machine • SC 211 Aluminum & PVC Mullion Processing Machine (2 blades) • SC 301 PVC Bead Cutting Machine or SC 301 S Aluminum & PVC Bead Cutting Machine without mold (applicable to 12 different beads) • SC 401 Aluminum & PVC Under-Cutting Saw (includes Ø450 mm saw blade) • SC 501 PVC Handle Drilling, Grooving, and Water Drainage Machine or SC 502 S Aluminum & PVC Handle Drilling, Grooving, and Water Drainage Machine (High-Frequency Motor) • SC 601 PVC Corner Cleaning Machine (3 blades)

See details

Auction

3d printer Markforged Full Metal X Production Farm

Baden-Württemberg

8,027 km

3d printer
MarkforgedFull Metal X Production Farm

€85,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Fsdpfx Afjyc Ub Tjnsfu Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

See details

Advertise here