Semi automatic piston filler

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting range round steel at 90°: 400 mm, cutting length (max.): 760 mm, working height: 720 mm, saw band length: 5,920 mm, TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: steplessly adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Kdjdpfx Abjyzn Hbsgjk Cutting length (single stroke): 10 - 760 mm Cutting length (multiple strokes): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Minimum finished part length: 10 mm (35 mm vertical) Note: Dismantling and loading can be offered by the seller at an additional cost. Roller conveyor is not included.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Kdsdpfxexrtt Ej Abgek Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts donor! TECHNICAL DETAILS Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Weight: 20,000 kg Engine operating hours: approx. 10,600 h Kdodoyzznlepfx Abgok EQUIPMENT Trailer Hopper Magnetic drum for mid-size fraction conveyor Magnetic drum for oversize fraction conveyor Clip-on chute Hydraulic rear support Direct connection Central lubrication system Generator 50 mm drawbar eye Note: The engine starts but shuts off again after a while. Presumably there is a fuel issue. The generator produces power. The machine is currently not roadworthy as it has been stationary for a long time. Road registration is currently not possible.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Kdedpfxsyw I Htj Abgok Note: Clara extraction unit is not included in the scope of delivery.

Condition: like new (used), 12fill VMP semi auto filling machine Kdodpfx Ajhpqvysbgek semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Kdjdpfxsyn Nwte Abgsk Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Travel X: 1,020 mm Kdedeyn Nvvepfx Abgsk Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Kdsdpfxewzay Ts Abgok Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Bidding commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Kedpsyn Ibwofx Abgedk Contents: - Mounted vice (jaw width: 150 mm) - Belt sander (Manufacturer: FERM, belt width: 100 mm, disc diameter: 150 mm) - Clamping jaws - Dies - Tap sets MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3000 x 1100 x 1200 mm Weight: 350 kg Note: The sale does not include the drill press or tapping arm currently on the workbench. External reference: Pieper – Lot 67

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Dimensions & Weight Ksdpfx Abjyn H Rdsgodk Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg External reference: Pieper - Lot 68

Condition: like new (used), Vacuum filler VEMAG HP15 E TYPE 162 Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 350 l hopper Standard double screw Standard double screw housing Graphical display of all settings, functions and fault information on TFT Color screen Program memory for 99 filling programs, Nominal output, total: 25 KW Ksdpfx Abjvx Nkkogedk VEMAG lifting and tipping device for HPE with 250 l hopper - To fit standard trolley, 200 l capacity Machine dimensions in cm: Width: 140.0 Length: 240.0 Height: 215.0 Voltage: 380 V, 50 Hz Weight: 1450 kg

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Kedpfx Asyn H Hlebgsdk Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 950 mm Weight: 150 kg External reference: Pieper - Lot 75

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Kjdpfx Aoyn Hwqjbgodk Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 920 mm Weight: 100 kg External reference: Pieper - Lot 103

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Kdedol Hxnijpfx Abgjk

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Available in different sizes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 50 mm Weight: 30 kg Kodjyn Hq Repfx Abgsdk External reference: Pieper - Lot 125