Used Cross-Flow Separator for sale (12,462)

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW Lrodpfjyrdlasx Akqjk If you have any questions or require further information, please send us a message or call us.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Lsdpfou Tg I Dsx Akqsrk Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Separator element for pallet racking system. Suitable for frames with depths of 1000, 1050, and 1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Lsdpfek Tzzlox Akqjrk Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Working area 4000 x 2000 mm Ljdpfx Akeykulneqerk Cutting power 4000 bar

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Lsdpfjqvvpajx Akqjrk

Condition: used, Year of construction: 2024, Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system Lsdpfx Aoxchy Uskqsrk

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Lsdpjl Hxnxsfx Akqjrk

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 Ledpodki Rtjfx Akqjrk -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 Lsdpfsvvl Ugox Akqerk • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Lrjdpfx Akjvmq Tieqsk

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° Ledpfxsx H Rtnj Akqork - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Lrodpfow Icgbox Akqok

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products Ledewd Sh Uepfx Akqsrk

Condition: excellent (used), Year of construction: 2014, Ilapak Smart Flow Wrapper Zodiac coder Suitable for clear or printed film In everyday use Adjustable infeed box In excellent condition Lrjdpfxswttcxj Akqjk

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Lredpfx Asv T D D Uskqsk Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Lodpfxoxhf A Rs Akqerk Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,900 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 178 mm, table length: 4,000 mm, table width: 2,000 mm, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, rapid traverse Z-axis: 12,700 m/min, 💧 FLOW MACH 4 4020 – 5-Axis Waterjet Cutting Machine Year of manufacture: 2015 Working area: 4000 × 2000 mm (4 × 2 m) Cutting head: 5-axis (XD/dynamic bevel head) Pump hours: approx. 9,000 h Condition: Very good Service status: Regularly serviced, fully operational 🔧 Machine Overview The Flow Mach 4 4020 is a high-performance industrial waterjet cutting system tailored for demanding production environments. With its 5-axis XD cutting head, it enables dynamic bevel cutting, taper compensation, and precise 3D geometries—ideal for accuracy-driven and advanced applications. Despite its year of manufacture, the machine is in outstanding technical condition and has received professional, scheduled maintenance throughout its lifespan. All servicing has been performed on time, guaranteeing reliable, stable operation. Lrsdpfx Aksyaiqqsqok ⚙️ Key Features - Working area: 4000 × 2000 mm - 5-axis XD cutting head – enables bevel cutting and taper compensation - Robust gantry construction for high precision - Industrial CNC control system - Capable of processing metals, stone, composites, glass, and technical materials 💦 High-Pressure System - Pump operating time: approx. 9,000 hours - Pump and high-pressure components serviced in accordance with manufacturer guidelines - Stable pressure and consistent cutting performance ✅ Condition & Maintenance - Machine in very good overall condition - Continuously maintained during operation - No outstanding maintenance tasks - Ready for immediate integration into production 🎯 Summary This Flow Mach 4 4020 represents a well-maintained, proven industrial waterjet cutting solution with powerful 5-axis capability. It offers an excellent opportunity for companies seeking a dependable, high-precision system without the cost associated with new equipment. 📩 Contact us for further technical information, additional photos, or a customized commercial quotation. Included equipment: - Abrasive delivery system - Special tool for pump cylinder disassembly (FLOW hydraulic wrench) - Various spare parts The machine is fully functional, features low operating hours, and is immediately ready for use. It is the ideal solution for organizations seeking a reliable, large-format waterjet cutting system—including all essential accessories.

Condition: good (used), Filling quantity: 35 kg Ljdjgl Auxspfx Akqsrk

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Ledpfoxwtu Tex Akqerk Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Ljdpfx Akjxv A I Heqjrk

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned. Lodsnt Uc Ropfx Akqjrk

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Lodpfx Aofv Hphokqork Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Lodpfx Aeupx E Uokqjrk

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Lredeupx E Iepfx Akqsk Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Lrsdpfx Aoxtvb Uskqok Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.