Used Hermle Rs 2 for sale (79,491)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40 Njdpfx Akoylw Stsqjcr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, total length: 17,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 2, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) Ncedpsv Ungcsfx Akqer - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 1988, condition: good (used), x-way 500 mm y-way 360 mm z-travel 400 mm main spindle mounting taper ISO 40 table clamping area 800 x 390 mm speed 20 - 4000 rpm Njdpfopq N Skox Akqocr quill stroke 80 mm total power requirement 4,5 kW machine weight approx. 2200 kg Further data see photos Function untested

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Ncodpfx Akjynw Erjqsr Chip conveyor Heidenhain measuring probe Blum laser system

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 Ncodpfxjyv A A Hj Akqjr MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Ncodpforvitljx Akqsr Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 Nodpfx Akov Hxifsqocr - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS - A AXIS +15º / -97º C AXIS 360º - C AXIS 360º

Condition: good (used), CNC - Universal Milling Machine HERMLE UWF 902-S - Heidenhain 426 control - Year of manufacture: 1997 - Travel X/Y/Z: 600-450-500 mm - Tool holder: SK 40 - Vertical - horizontal milling unit - Boring quill - Coolant system - Swivel/angle table - Machine enclosure - Documentation Dimensions (LxWxH): 3.9x2x2 meters / Weight: 4000 kg Ncjdeytnpxspfx Akqor Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 1995, Make: HERMLE Ncedjyfgrvepfx Akqor Type of machine: UWF 1202 H Year of manufacture: 1995 Tool holder: SK 40 x-travel: 850 mm y-travel: 630 mm z-travel: 550 mm max. Table load: 700 kg Overall dimensions: 4 950 × 2 300 × 2 300 mm Table dimensions: 1200 × 550 mm

Condition: used, Year of construction: 1996, x-travel 850 mm Nedpsuxfz Asfx Akqecr y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: new, Year of construction: 2026, overall weight: 4,300 kg, working range: 1,200 mm, power: 44 kW (59.82 HP), RS TeamTech Sp. z o. o. We are a Polish manufacturer of personalized recycling machines - we select machine parameters individually for each client. The presented shredder is: RS1200F Working chamber: 1200x600 mm POWER: 2x 22kW (Seweurodrive) The shredder has an advanced machine control box and a set of belt conveyors. The system monitors the load of the shredder motors, has a reverse and stop function in the event of overload connected to the belt conveyor system. Ncedpfx Akjr Dffmjqsr Contact us RS TeamTech Team

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable Ncodsdlp Txopfx Akqor Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg Ncedpfsfm A Upsx Akqjr

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: Ncedpfjv Ed U Djx Akqor >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: good (used), functionality: fully functional, Schröter 2-trolley smoke, cooking, and drying systems, gas-heated Each unit suitable for 2 standard trolleys 1x1x2 meters With gas burner With cooling coil Nsdpfoykl N Rex Akqecr With smoke generator With control system Wiring diagrams available. There are 2 units, fully dismantled and dry stored.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Ncsdpotqcu Eofx Akqer Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Njdpetrf Ulefx Akqjcr (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Table size 900 x 460 mm Ncjdpfx Akel Dvx Eoqjr X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! Ncedpfx Akexqfzreqjr TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: new, Year of construction: 2025, operating hours: 671 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain TNC7, workpiece weight (max.): 1,100 kg, table width: 800 mm, table length: 616 mm, rotational speed (min.): 20 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain TNC7 Spindle HSK-A63 16,000 rpm 30 tool positions Rigid clamping table 800x616 Internal coolant supply 40 bar with paper band filter Scraper belt conveyor Handwheel BLUM LC53-Digilog for tool breakage detection/measurement Touch probe BLUM TC Machine ON: 671 h Spindle ON: 61 h Ncsdpfx Akoyf E Atoqer Machine is approx. 6 months old. Offered for sale on behalf of customer. Inspection possible by prior arrangement.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg Ncsdpfxjw Sv Iao Akqor - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Nsdpsm Albdefx Akqocr Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal Ncjdpfx Akowyn Rqsqor - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: used, Description: Temperature test chamber Manufacturer: RS-Simulators / VTS 1200/75/S Temperature range: -75 to +180°C External dimensions: 2.30 x 2.30 x 2.80 m (L/W/H) Test chamber dimensions: 1.10 x 1.00 x 1.00 m (L/W/H) Njdpfx Aewp Ip Eokqscr Unit: 2.30 x 1.30 x 2.00 (L/W/H) Average heating rate: approx. 5 K/min (from -40 to +150°C) Average cooling rate: approx. 5 K/min (from +150 to -40°C) Current: 38 A Connection voltage: 3 x 400V/NPE 50 Hz Weight: approx. 2700kg Item condition: used item Contact us if you have any questions Shipping: the stated shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany on request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to commercial customers without warranty or guarantee. Deviations from technical data as well as errors in the description of the items may occur and are reserved.

Condition: used, Year of construction: 2014, operating hours: 87,419 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 20,657 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-axis machining centre Siemens 840D sl Operate 55 tool positions HSK-A63 NC tilting rotary table SRT320 mm C-axis worm gear drive Single-sided drive A-axis Standard coolant system without through-spindle coolant (IKZ) Rear-mounted scraper belt conveyor External air blast Spindle centre air blast Chip flushing gun Oil mist extraction incl. post filter Automatic cabin door Manual cabin roof Nodpfx Akjxxg D Roqecr Electric thermal compensation Siemens Heidenhain touch probe