Used Press Feeding System for sale (49,434)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz Ncjdpedzqmzsfx Akqor - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Ncsdpfx Aedzqltjkqjr Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. Nodjkpwuuepfx Akqscr The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: new, Year of construction: 2026, Dimensions (L/W/H) 1400x2450x2800 mm Total pressure 400 to weight of the machine ca. 12000 kg Ncsdpfeyk H Twsx Akqer

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg Nodpsitdikofx Akqjcr

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg Ncedpfxovpd Huo Akqor

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar Njdpfx Aevgu Haskqjcr -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h Ncedpfx Aksqcyzwoqsr -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: ready for operation (used), functionality: fully functional, total width: 13,800 mm, cutting length (max.): 6,900 mm, Roof Truss Pressing System (C-Type) – Complete Production Line with Crane Complete, fully equipped roof truss pressing system for sale. The system is in good technical condition, regularly maintained, and ready for immediate operation – no additional investment required. Nedpfx Aksymmrljqecr Designed for professional timber structure manufacturing, suitable for small to medium-scale production. 🔧 Included Equipment • Hydraulic roof truss press • C-type configuration • Assembly & pressing tables • Floor-mounted rail system: 12 m • Second-hand tables: 12 pcs • Like new Randek pressing tables: 4 pcs – 550 mm • Like new Randek ridge table: 1 pc – 900 mm • Overhead crane system • Crane radius: 6.9 m 📌 Key Advantages • Fully operational – plug-and-produce setup • No immediate repair or upgrade costs • Efficient workflow layout with integrated rail system and magnetic tables • Ideal for prefabricated roof truss production 📍 Additional Information • On-site inspection available • Suitable for companies entering or expanding in timber construction • High-quality industrial-grade equipment • Transportation costs are not included.

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Ncedpfx Aksrnnt Ijqer Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: excellent (used), Band width: max. 400 mm Band thickness: 0.5 - 4.0 mm Cross-section: 1,000 mm² Upper roller pneumatically liftable Large roller basket at infeed Side band guide with right/left spindle With mounting plate for installation on the press body Ncsdpsxg Rlzjfx Akqjr The feeder receives a completely new press control as a desktop unit upon order

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Ncsdjtgik Rspfx Akqor Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece width (max.): 850 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-Sided Feeding Station, Machine No. 0-280-07-7582) - 1 powered stacking roller conveyor - 1 lift table with powered stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 stripper plate - 1 central thickness adjustment for the suction carriage - 1 height-adjustable belt conveyor - 1 infeed roller track with inclined supporting rollers - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Workpiece length: 600 - 2,500 mm Workpiece width: 300 - 850 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, longitudinal to crosswise, Machine No. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, crosswise to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-Sided Stacking Station, Machine No. 0-281-07-7589) - 1 height-adjustable single sheet transport - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for board transfer - 1 lift table with powered stacking roller conveyor - 1 powered stacking roller conveyor, located behind the stacking station - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Ncedpoyg Haiofx Akqer Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos Ncsdsi Exp Eepfx Akqer -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm Nedpfx Akopwnf Nsqecr -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Weight 8000 kg Nsdpfx Aksv A Hlmsqscr Total power requirement 45 kw

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Nodpfx Akerwxz Roqjcr Unwinder (reels holder) with coating sheet cutting system

Year of construction: 2020, condition: new, Feeding for granulate and powder Nodpfx Aksfmn Ufsqocr

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. Ncsdsh Ap Idjpfx Akqjr 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Njdpfx Aksd Su Hxoqocr Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Weight 6000 kg Total power requirement 10 kw Nsdpfxov A Hkce Akqocr

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Nodpoyc Eukjfx Akqocr Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Njdpfxev Sthge Akqscr Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: M60I/8629, Offer Number: M60I/8629 Machinetype: feeding system for parts Ncjdpfxewi Sv Nj Akqjr Make: SKAKO Type: LTD100/0234CSSL Constr. year: 2013 dimensions: 820x540x70 capacity: 1 to daylight: 2337 mm Location: Germany

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a loading and stacking system from the brand: Wamhoff. Including: a cross-transport carriage in front of the loading system. Including: all transport lines. Including: a Wandres brushing machine. Including: a hook turner for turning the panels 180°. Including: a turning station for turning the panels 90°. Including: a cross-transport carriage for feeding Euro and disposable pallets. Images: 1. Cross-transport carriage, Wamhoff, model 2012 (Image 1) 2. Loading system, Wamhoff, cross-version, model 2012 (Images 1 and 2) 3. Operating terminal, Wamhoff (Image 3) 4. Intermediate conveyor with hook turner, Wamhoff, model 2012 (Image 4) Nodpfxswbzy Us Akqecr 5. Wandres cleaning unit, model 2006 (Image 5) 6. Turning station, Wamhoff, manufactured in 2012 (Figure 6) 7. Stacking system, Wamhoff, manufactured in 2012 (Figures 7 and 8) 8. Layout loading system (Figure 9) 9. Layput stacking system (Figure 10) The machine must be dismantled and loaded by the purchaser.