Through feed presse

WINTER TA513B-400T/1

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max Iodpfxeucdgpo Abgstf TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Iodpjg Rn Efjfx Abgstf Without transport costs.

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m Iedev Sva Sjpfx Abgjtf permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Itedpou Rp Hmofx Abgof

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm Itjdpfsvuuf Eox Abgjf height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: K100UT22-03, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 100 t, stroke length: 500 mm, clearance between the columns: 1,000 mm, overall weight: 5,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, Working pressure 1000 [kN] Piston stroke 500 [mm] Approach speed 25 [mm/s] , Return speed 35 [mm/s], Work speed 3-10 [mm/s] Iedpfx Abetpwu Ejgstf Work table - space between frames 1100 x 700 [mm] Approximate dimensions L, W, H 1,5 x 2,5 x 4,0 [m] NC control HMI Beijer, Controlling the positions of the top and bottom piston, pressure and speed. Program memory. Manual mode is used primarily for tool setup. The movements are controlled with buttons. FRAME: - Welded steel frame - CNC milled work tables and machine frame - Automatic lubrication of beam guides - T-slots made to measure according to customer specification CONTROL PANEL - HMI touch screen Beijer 10'', - Siemens S7 PLC - Pressure and speed control - Program memory - Remote access for service assistance - Joystick for sensitive adjustment HYDRAULIC SYSTEM - Bosch Rexroth hydraulic components - Hydraulic overload valve - Proportional valve for speed regulation - Proportional valve for pressure regulation - Air cooling

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. Ijdpfx Aboykpamogstf The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, stroke length: 1,500 mm, overall weight: 50,000 kg, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T. Isdpfx Ajwtbc Tobgotf

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm Iedpfeb R Addjx Abgjtf -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Itedpfxsydanho Abgof Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.