Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Large EMMES Hydraulic Press, there are 2 of these in good working condition. Cxn3si7 Please contact for more Information more
5
Clamping depth approx. 1050 mm Clamping length 2500 mm Bbv3009p0y two floors four clamping units mobile execution swiveling technical data on request more
5
Veneer press plate press adhesive press, press, forming press -pneumatisch operated Ql30k7lbn -Plattenabmessungen12 pieces 100 x 300 mm -maximum opening width mm -400 kg aluminium shapes masterbar 1900/700/H1630 mm Weight approx. 400 kg more
3
Hess gluing star press 1985 used. Length 2800 3000 b 2500 mm h mm. glue star type. 380Volt, 50 Hz. Further details and price on request. Contact us! Ndrmr more
6
Vertical edge joint glueing press Crxh9m8h Length: 3500 mm Usefull height: 1500 mm. Usefull thickness: 100 mm. 4 vertical hydraulic rams 2 frontal pneumatic clamps, movable over the length of the press more
6

Decklagenpresse WILD / BÜRKLE -

Barntrup, GermanyGermany dealership location
6504 km
1998
used
Decklagenpresse Fabrikat: Wild / Bürkle Baujahr 1998 Eingangsmaterial für die Deckschichtfertigung Holzarten: Harthölzer wie Eiche, Buche, Ahorn, Esche Abmessungen: Länge 300/ 400/ 500 mm, +/- 0,5 mm Breite: 26 mm, +/- 0,1 mm Stärke: 4 mm +/- 0,2 mm Holzfeuchtgehalt. 7% +/- 1,5% Die max. Durchbiegung einer Lamelle muss immer kleiner als die Lamellenstärke sein und darf max. 3 mm nicht überschreiten. Die max. Verdrillung/Torsion einer Lamelle muss immer kleiner als die Lamellenstärke sein und... more
6
Manufacturer: Schöberl, Type: Durchlaufverleimanlage, Year: 1997, Finished product dimensions: 2400 X 1300, Input material: lamellen, Longitudinal through running press: yes, Press length mm: 2500, Pressing width mm: 1400, Press power kg /cm²: Seitlich 6 stk. Hydraulikzylinder Ø 40 x 100 mm, Through running machine: yes, FREE TEXT: Presskraft bei 160 bar = 2.000 daN, Year :1997 D8frzoh more
7
-4500 x 500 mm -power 4,5 kW -gluing press with stores for the production of solid wood Panels for e.g. staircase steps and stringers -press store with 11 compartments -transport and gluing equipment -the unit is designed for the gluing of panels -the lamellas are glued blunt --The timber is put on the cross conveyor, brought to the gluing unit separately and after the glue application the transport takes place on the transport belt of the accumulative transfer. The glued block of... more
5
Veneer press, platen press, plate sizing press, gluing press, gluing unit, adhesive melter, gluing machine, hot glueing machine, industrial hot glue gun -2x robot movable on portal travel approx 12 m Cklq9k9a -1x loading robot KUKA type KR500-2 with multi-function gripper -1x adhesive robot KUKA type KR150-L130 with application head ICO Ak 87 1 PFU40 -2x barrel melting equipment manufacturer ICO type ICO FS 20 -Portal plate press volcano -Plate dimensions 4600 x 1300 mm -Max. Opening width mm ... more
1

Ramach locks up bank Ramach

AL Oldenzaal, NetherlandsNetherlands
6352 km
good condition (used)
For sale due to cessation business activities (kitchen manufacturing factory) ingoede is a ramarch locks up bank. 310 cm and height 129 cm length. Cfbva0mw Against every plausible bid. more


Gluing pre...
daily

New machines via email!

Stay updated!
1
Saeed Verleimen stand, very good ZustandPreisänderungen reserved, errors, printing, and typographical errors reserved Ba3bfqrdjs more
1
Solid wood press press area width: ca. 1050 mm height: ca. 950 mm 9gxcumeu3 outer dimension (BxTxH): approx. 1400 x 900 x 2150 mm more
6
Second-hand machine State: Funktionsgeprüft 3oiuzlo Equipment and technical data: Incl. 4 cylinder press Maximum press area: 1900 x 700 mm Location: Hochheim Availability: Short term more
6
Gluing press “BAIONI PRESSE” - LISTELPRESS 3.000 x 1.300 Ckrpa3lu Manufacturer: BAIONI PRESSE Type: LISTELPRESS 3.000 x 1.300 Year: 1999 (CE) Serial N.: 900124 Machine used for bonding wooden boards/profiles. Composed by: • roller conveyor for pieces loading, • hydraulic working cylinders, • heating system, • Vacuum unit and unloading the finished product, • control panel. CE marked; complete with metal protection; more
5
Veneer press plate press plate press, gluing press Plate dimensions 2200 x 1200 mm -maximum opening width 415 mm -Obere heating electrically defective -Mittlere and lower heating plate in order -4 x hydraulic punch 37qdsfsp Rack and pinion Masterbar 2600/1350/H2000 mm Weight 3000 kg more
1

Verleimpresse Hess VP

Nattheim, GermanyGermany dealership location
6733 km
used
Bb8qdqq80n mit Heizschiene 5 Zylinder von oben Lagerort: Kunde more
3

Gluing stand Schöberl VST

Schwarzach, AustriaAustria
6766 km
excellent (used)
Clamping length 3000 mm Clamping height 1900 mm Bcbqztahw2 6 press cylinder Heating ruler 3500 mm more
3
Kantenpresse Pressbereich: 2900x1200 mm doppelseitig belegbar mit hydraulischen Spannzylindern und zentraler manueller Betätigung Z8tjvpmb more
2

Wall gluing press Polzer

Kempten-Leubas, GermanyGermany
6788 km
good (used)
Wall gluing press manufacturer POLZER Y2a2wcyv Press button 1600x2200mm 4 vertical pressure bar Print elements manually with hand crank Wall mounting more
15
 Start Chat

Gluing press for length Famad PHSL-R

Sierakowice, PolandPoland
6910 km
2000
refurbished (used)
CATALOG NUMBER 4984 TECHNICAL DATA max. length of the workpiece 2190mm 140mm workpiece width diameter of the 80mm suction pipe 3 pneumatic clamps from above + Bcb8v8jmbo 2 pneumatic side clamps + 2 pneumatic clamps from the bottom + from the face of the hydraulic clamp +   top control + table +   with crosscut saw + max blade diameter 300mm spindle diameter 30mm 3kW saw motor 2.2kW pump motor dimensions: length / width / height: 4710x1750x1920mm weight 1100kg Net pric... more
4

Press Bergamo Hidro Alfa 30 R

Hessen, DeutschlandGermany
6568 km
1993
ready for operation (used)
We sell a press of the Bergamo Hidro Alfa brand. Hdpc3rsgs Press width: 80 x 60 cm maximum height of the press material: 70 cm more
2

Komtec 6 KOMTEC 6 meters

Ariogala, LithuaniaLithuania
7164 km
good (used)
Komtec press Bcntr37lit more
3
Glueing star press Horstkemper P7butn 4 areas for pressing size 2920 mm x 680 mm each pressing area 6 pneumatic pistons on 3 m length and each side right and left 3 pneumatic pistons (all together per pressing area 12 pneumatic pistons) Overall size approx. L 3500 mm x W 1800 mm x H 1800 mm more
11
Type LZT 120 Max. working dimensions 1600х800 mm Each part can work separately Heated top and bottom Made in Austria in 1987 y. Machine is in Denmark. Delivery term: ~ 1 working week. Wv2uo more
6

"Clamp carrier"

Klipphausen, GermanyGermany dealership location
6821 km
1985
used
"Clamp carrier Number of presing levels: 4 Pressing length mm: 2.350 Pressing depth mm: 1.300 Workpiece thickness max mm: 100 Number of cylinders per level: 12 Distance between downholders min mm: 1.000 Downholder per pressing-level: 2 E2bg2vrfc Pneumatic pressure: Yes Rotation: motorized Downholder: manually Weight kg: 2.400 Operating status: basic functions can be shown Condition: suitable for use" more
6

pressure box HOMAG HOMAG PVK 270/10

Rietberg, GermanyGermany dealership location
6468 km
used
machine pressure box manufacturer Homag type HOMAG PVK 270/10 part Id-no. 2243315 Ikrh0f8 pressing surface 2700X1000 mm ... more
4

VENEER press 3200 x 1600 OTT .

DOJAZDOWA 14, 82-300 ELBLAG, PLPoland
7004 km
good (used)
PP-189) VENEER PRESS OTT Plate large: 3200 x 1600 mm Hydraulish, water heated Anodized plates 8 cylinders of DIA 100 mm Bdzwzbju 4 kg / cm 2 Opening 420 mm Dimensions: L. 362 cm, B. 160 cm, H. 245 cm; Weight: 9.000 kg more
4
Verleimpresse Fabrikat: Polzer Typ: HHVT_F 30/21 Baujahr: 1993 Pressbereich Höhe: ca. 2100 mm Breite: ca. 2840 mm Außenabmessungen: Höhe mit Auflagearmen: ca. 2700 mm Höhe Rahmen (für Transport): ca. 2.000 mm Länge: ca. 3.050 mm Tiefe: ca. 820 mm 6 Auflagearme über Kettenzug höhenverstellbar Spannung von Hand Mdaoxvnt Gestell auf Rollen verfahrbar more
4
Hot press good condition 10 Pistons ORMAMACCHINE Ekmvhua more
1
Floor press Columbus with special equipment Clamping depth up to 130 cm, length up to 250 cm. Puncture Elle beamed through continuous pressure bar back, as well as four piece pressure from above, as well as four piece upper pressure cylinders which are movable in depth. The device is very suitable for the gluing of filling doors, but also for the production of door frames. Yri3mw Sale due to operating resolution. Price ex works. more
3
Upcoming gluing press/gluing stand on wheels Manufacturer: Hess Hand hydraulic Double-sided Assembly possible. Ghxikxn2q Total width: 2,60 m Total height: 2.30 m On wheels more
4

10 pc Gluing press TAYLOR CC-M2

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
2016
good condition (used)
TAYLOR rotary gluing press, type CC-M2 Grjyi9mx8 Manufacture year 2016 Machine specifications: - 10 press areas - each area 600 x 6000 mm - clamp carrier more
4
The press is suitable not only for the classic widths glue such as stairs or table tops, but was used by us especially for the gluing of frame. Each floor can be individually folded upwards and features retainer. The pressure is pneumatically constructed using "Fire hose". E.g. Warp end steps serve as counter bearing 3 individually adjustable JAWS that are swivel-mounted, to tighten also trapezoidal components. The press is easy to put away when not in use roll and thus. Workable dimensions... more
2
self-made With frame tensioning device gluing stand used, good condition cleaned, tested hole press double sided vertical pressing cylinder 12 piece cylinder hub 100 mm pressing power ca. 600 kp per cylinder bridges for downholder 4 piece downholding mechanical working length 3300 mm working height/ -tiefe 1150 mm max. material thickness ca. 130 mm Wdbms moveable required space ca. l x w x h mm 3500 x 1100 x 2200 weight ca. 1800 kg located in 97447 Gerolzhofen sale in current condition - fr... more
1
robust and solid Stahlkontruktion careful execution technology and design Interior and integrated hydraulic unit free access from all sides provides maximum flexibility heavy rack and pinion adjustment as standard Press area with exchangeable aluminium covers equipped with timers and thermometers BUSES electric hotplates absolutely plane surfaces rivets and screw-free short heating-up time so fast operational readiness Bccjc00yil Heat-up time a... more
3
Beck floor press against B II with clamps, wheels, 5 floors, built in 98, press length depth of approx. 1700 mm per floor, approx. 1050 mm per floor, 1 switching valve per floor, 4 retainer with hand wheel, weight 450 kg, 54KN force at 6 bar pressure, thickness 15-70 mm Lyyuqmfh more
2

Bonding press, Veneer press BÜRKLE S10 250x130

Schwarzenbach, SwitzerlandSwitzerland
6719 km
2009
excellent (used)
working area 250x130 cm, gap 32 cm, 6 hydraulic cylinder, Bcbljfifel pressplates with cooling/heating connection, 340x150x190cm, 3000 kg more
4

10 pc Gluing press TAYLOR CC-M2

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
2016
good condition (used)
TAYLOR rotary gluing press, type CC-M2 Manufacture year 2016 Machine specifications: Ss0mx0 - 10 press areas - each area 600 x 6000 mm - clamp carrier more
7

Gluing Press for Panels Schöberl

Alte Dorfstr. 29, 32683 Barntrup, DEGermany
6505 km
ready for operation (used)
Gluing Press for Panels Dpiwzj7 make Schöberl panel gluing press pressing surface 2500 x 1400 mm 6 hydr. cylinder lateral, diameter 40 x 100 mm 2 hydr. cylinder from top, diameter 63 x 250 mm press capacity at 160 bar approx. 2.000 daN The press capacity of the lateral cylinders as well as the suppressing pressure of the upper heating plate can be adjusted infinitely variable and independent of each other. Power supply 3 kW more
3

Three-two Mawegg Verleimpresse

Eurasburg, GermanyGermany
6854 km
1990
good (used)
Press on wheels Gynl9ahtw more
3
HW presses are equipped with a special internal heating system. They can be plugged to a central heating system. The main advantages of the HW model are the modest purchase price and especially the small operating costs. - digital indication and automatic control - automatic mode: cycle time control with automatic plate opening function time control for opening time - digital indication of plate temperature Gza70fofk more
4

Gluing press Hess Standard 1

Lanzing 6B, 84347 Pfarrkirchen, DEGermany
6922 km
1988
excellent (used)
Pneumatic, photos see Hess press. for countertops: 210 x 210 cm. Available from December 2018 Gooaybu3e more
6
BORA universal hole plate press Bora II set 2 the versatile hole plate press for various areas of application. Fitting the die plate hand hydraulic press unit finalised 3 x 2 grid bolt incl. ERGO grip, quick screening by self locking, pressing force 20.000 N, press stroke 60 mm, plate 140 x 80 mm 2 x hand hydraulic press unit 360° swivel bolt with 1 grid and quick lock incl. ERGO grip, force 20000 N, press stroke 60 mm, plate 140 x 80 mm 3 x single abutments with 2 grid pin pad format 1... more
6
Hydraulic press Stromab : - working capacity : 6000 mm x 1200 mm - maximum thickness of beam for bonding : 200 mm - diemsnions of one rack : 250 mm x 200 mm - quantity of vertical beams with cylinder : 18 - front hydraulic pressure clamps : 5 - thrust of each hydraulic cylinder : 7200 kg - force exercised on 200 mm thick beams kg / cm2 : 11 kg / cm2 - force exercised on 250 mm thick beams kg / cm2 : 8,7 kg / cm2 Jvq7a7jt more
5
Floor press / solid wood gluing press HAPFO C-S S-VAR tandem (Columbus) 2001. 4 floors 4 units per floor (pneumatic) each floor 4 holders Bb7kefwac9 maximum work area per floor: 2,500 x 1,040 mm Thickness approx. 20-80 mm The two medium-sized Edition units by the press are movable. The floors are individually switchable Mobile more
4

Heavy press of gluing, gluing star Hess Hess

Krasocin, PolandPoland dealership location
7230 km
good (used)
Heavy Berleimpresse Hess, 6 arms Very good condition. Hydraulic hold-down device from above, each 400 mm, banding machine, gluing: -Height: 1300mm -Length: 6200mm -Depth: 100mm Size of the press: Cwkitat0u -Length: 9000mm -Width: 5000mm -Height: 4500mm The machine is still in use. Very good condition. Very robust construction. Can be viewed at any time by appointment. more
5
Gluing star with 6 gluing levels, each level 4 cylinder with 2 separated air circuits, Ssz7g8 Press depth 750 mm Press length 2000 mm more
10
GLUE BOARD PRESS (PINE WOOD) 3000 X 1800 MM. WITH SIDE PRESURE CYLINDERS + KALLESOE GLUING EQUIPMENT MODEL KL 20 (SYSTEM WITH AUT. FLOW OF STICKS, PUSHER, GLUEROLLERSPEED, MAGAZIN, TABLE BEFORE PRESS) GLUEMIXER, OILBOILER FOR PRESS BRAND BAIONI (I) - TOTAL LENGHT OF LINE 15000 MM. Glvdjlt more


Gluing pre...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close