Gluing press

Steton P111 3000×1300

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Nlsdefi Tg Hepfx Am Def Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Njdpfx Ash E Sghsm Djlf Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Nedjt Uduxspfx Am Delf

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Nodpfx Ajvfr Rgom Dolf Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg Nledpfx Amou I R Uto Dsf - Available immediately -

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder only machine Nljdpfx Amoncc Igo Dof machine is dismantled, immediately available Transport can be organized

Condition: used, ORT RP18B overhauled Nledjuua H Repfx Am Dsf

Year of construction: 2010, condition: ready for operation (used), Fully automatic finger jointing line: type double pack Machine is dismantled Machine is checked with functional guarantee Specification: Wood input length: min. 150 mm Nlsdpfx Asncd Utjm Def max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood output length: 6030 mm Max. Wood cross section at 10 mm tine size: hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted capacity: 6 milling tables/ min working height: 960mm table width: 600 mm Glue application: double-sided application With endless packaging Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) Nlsdpfx Amed Tyvxe Dof - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: good (used), Obel Pedersen High-frequency continuous belt press Nlodpfx Aodybr Rjm Dof Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, HF generator T20 V and water cooling System has been dismantled.