ORT RP18B rev

ORT RP18B rev

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Crodsx H Rmujpfx Afxjg Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Credodx Ryyspfx Afxjg coil hight: max. 800 mm

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Csdpfxsh In Ths Afxjrg Reconstruction- 2022

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Crodszipf Sspfx Afxeg

Condition: refurbished (used), machine/vehicle number: 1500/R, Load application device with test forces from 1 to 187.5 kg - Brinell 15.625 7 31.25 / 62.5 / 187.5 - Rockwell HRA / HRB / HRC Scope of delivery: - Hardness testing device - Ground glass plate - Fresnel lens - Vertical illuminator - Threaded spindle with feed mechanism - Illumination device - Objective lens 70X - Evaluation unit - Ball holder with ball, Ø2.5mm Brinell - Diamond indenter 120° Rockwell - Test table, flat, Ø80mm Crjdsdb E Tfopfx Afxsg - Prism support, Ø80mm - Power cable Optional: - BVMS software (see 3-rath.de)

Condition: used, mileage: 113,000 km, power: 100 kW (135.96 HP), first registration: 11/2013, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - 3-way tipper - Trailer coupling - New coupling Suspension: Crsdpfsxznafox Afxeg Leaf spring suspension

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] Crjdpfx Ajuhb Uhofxeg - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m Crsdpfx Afsu Idkzexeg The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Crsdpouz If Nefx Afxjg Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us. Crjdpebrantsfx Afxeg