Used Caravan for sale (82)

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Payload: 777kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Hodpfx Ajrk Ikqjmiel Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: new, functionality: fully functional, empty load weight: 155 kg, maximum load weight: 595 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, SARIS MP 205 113 750 1 NEW VEHICLE Hsdpfjrk Ilvjx Amijl Internal dimensions: 205cm x 113cm Side wall height incl. railing: 43cm Loading platform height: 51cm Gross vehicle weight: 750kg Payload: 595kg Unbraked single-axle low-loader KNOTT axle Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls Steel railing Rear tailgate fold-down and removable 15mm thick, non-slip and durable phenolic plywood floor 6 lashing eyes with 400kg tensile strength each 13" wheels M+S tires Net/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog lamp, and triangular reflectors Plastic mudguards 2x wheel chocks T-bar drawbar OPTIONAL EQUIPMENT PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front wall - Loading ramps - Tilting loading platform - Ramp in combination with tilting loading platform - Gas springs for tilting loading platform - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh side extensions in various heights, also closed - Flat cover with or without hoops - High cover 120cm - Rear supports - Jockey wheel Additional accessories on request! Plus shipping to Gera and vehicle registration document €100 net Images are for illustration purposes and may include optional accessories at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock, available for immediate pickup. Workshop open weekdays from 8:00am to 5:00pm for all types of repairs. Specialist for axle repairs, including for caravans. Large selection of rental trailers. We also have a wide range of spare parts and accessories for trailers from all manufacturers. Get professional advice by phone, visit our website, or drop by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-3, empty load weight: 421 kg, maximum load weight: 1,579 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 306 170 2000 2 NEW VEHICLE Internal dimensions: 306cm x 170cm Sidewall height: 30cm Loading platform height: 65cm Gross vehicle weight: 2,000kg Payload: 1,579kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium side panels with tension locks Drop and removable side panels on all sides 15mm thick, slip-resistant, durable phenolic plywood floor Automatic jockey wheel with 400kg bearing load 8 noise-suppressing lashing rings with 800kg tensile strength each Reinforced 13" C-tyres with steel valve M+S tyres Net/rope hooks on frame 13-pin plug LED front marker lights Rear lights with reversing light, fog lamp, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Side wall extension to 35cm - Black Edition (powder-coated side panels and rims in black) - Integrated loading ramps 2,800kg - Steel plate on floor panel - Full LED lighting - Anti-theft lock Hedpfxoghpdbs Amijl - Net, fine or coarse mesh - H-frame - Mesh side extensions at various heights, also enclosed - Top boards 30cm with tension lock - Flat cover tarpaulin with or without bows - High cover tarpaulin 160cm - 200cm Further accessories on request! Plus shipping to Gera and vehicle registration documents: €200 net Images are for reference and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. Our workshop is open weekdays from 8:00 - 17:00 for all repair work. Specialist in axle repairs, also for caravans. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: new, functionality: fully functional, empty load weight: 517 kg, maximum load weight: 2,183 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 356 184 2700 2 NEW VEHICLE Internal dimensions: 356cm x 184cm Side wall height: 35cm Loading floor height: 65cm Gross vehicle weight: 2,700kg Payload: 2,235kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2 x 1,350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum side panels with tension lock Fully drop-down and removable on all sides 15mm thick, non-slip and heavy-duty phenolic plywood floor Automatic support wheel with 400kg load capacity 8 noise-damping lashing rings with 800kg traction load each Reinforced 13” C-tyres with steel valve M+S tyres Net/rope hooks on the frame 13-pin plug Front LED position lights Rear lights with reverse light, fog light and triangular reflectors Hodpfogrwgkox Amisl OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment package (shock absorbers) - Spare wheel with holder - Without side panels (discount) - Increased side panel height to 35cm - Black Edition (powder-coated panels and rims in black) - Integrated loading ramps 2,800kg - Steel plate on floor - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - 30cm extension sides with tension lock - Flat tarpaulin with or without bows - High tarpaulin 160cm – 200cm Other accessories available on request! Plus freight to Gera & vehicle registration documents €200 net Images are for illustration purposes and may include optional accessories at extra cost. Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pick-up. Workshop open for all kinds of repairs Monday to Friday from 8:00 a.m. to 5:00 p.m. Specialist for axle repair, including for caravans. Large selection of rental trailers available. We also have a wide range of spare parts and accessories for trailers of all brands. Get expert advice by phone, visit our website or stop by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-12, maximum load weight: 2,251 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 306 170 2700 2 NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading height: 65cm Gross weight: 2,700kg Payload: 2,265kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2 x 1,350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks All sides can be folded down and removed 15mm thick, slip-resistant and durable phenolic plywood floor Automatic jockey wheel with 400kg nose weight capacity 8 noise-dampening lashing rings, each rated to 800kg Reinforced 13" C-tyres with steel valves M+S tyres Net/rope hooks on frame 13-pin connector LED marker lights (front) Rear lamps with reversing and fog light, plus triangular reflector Hedpjghpchsfx Amijl OPTIONAL ACCESSORIES - PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100km/h approval (shock absorbers) - Spare wheel with holder - Without side walls (discounted price) - Raised side walls to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps 2,800kg - Steel sheet over floor panel - Full LED lighting - Anti-theft lock - Fine or coarse-mesh net - H-frame - Leaf mesh sides in various heights, also available closed - 30cm extension side walls with tension locks - Flat tarpaulin, with or without hoops - High tarpaulin 160cm - 200cm - Folding crank rear supports Further accessories available on request! Plus delivery charges to Gera and vehicle registration papers: €200 net Images are for reference only and may show optional equipment subject to surcharge. Haven’t found the right trailer? We always have 50-100 vehicles in stock and ready for immediate pickup. Our workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialists in axle repairs, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for all manufacturers' trailers. Call us for advice, visit our website, or drop by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, maximum load weight: 2,894 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 406 184 3500 2 NEW VEHICLE Internal dimensions: 406cm x 184cm Sidewall height: 35cm Loading height: 68cm Gross weight: 3,500kg Payload: 2,894kg Braked tandem trailer Overrun and handbrake by AL-KO Largest possible axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile sidewalls with tension locks All sidewalls foldable and removable 15mm anti-slip, robust phenolic ply floor Automatic jockey wheel with 400kg support load 8 noise-damping lashing points, each with 800kg tensile strength Reinforced 13" C-rated steel wheels with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector LED marker lights at the front Rear lights with reversing light, fog lamp, and reflective triangle OPTIONAL ACCESSORIES PERMANENTLY REDUCED FROM FEBRUARY 2026 - 100km/h kit (shock absorbers) - Spare wheel with bracket - Without sidewalls (discount) - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps, 2,800kg - Steel plate overlay for floor - Full LED lighting - Anti-theft device - Net (fine or coarse mesh) - H-frame - Leaf mesh sides in various heights, also closed - Extension sidewalls 30cm with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180cm or 200cm - AL-KO winch, 12.5m Further accessories on request! Plus shipping to Gera and vehicle registration documents: €200 net Photos are for illustration purposes only and may show optional accessories at extra cost. Have you not found the right trailer yet? Hodpoghpbksfx Amiel We have 50-100 vehicles permanently in stock and available for immediate collection. Our workshop is open weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravan trailers. Large range of rental trailers. Additionally, we offer a wide selection of spare parts and accessories for trailers of all manufacturers. Contact us for a consultation by phone, visit our website, or come by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 541 kg, maximum load weight: 2,159 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 184 2700 2 NEW VEHICLE Internal dimensions: 406 cm x 184 cm Side wall height: 35 cm Loading platform height: 68 cm Gross weight: 2,700 kg Payload: 2,149 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame 35 cm high aluminium profile sidewalls with tension lock All sidewalls fold down and are removable 15 mm thick, non-slip, robust phenolic plywood floor Automatic jockey wheel with 400 kg nose weight rating 8 noise-suppressing lashing rings, each with 800 kg tensile force Reinforced 13" C-type tyres with steel valves Hsdoghpbgopfx Amisl M+S tyres Net/rope hooks on frame 13-pin plug LED position lights at the front Rear lights with reversing light, fog light and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without sidewalls (discount) - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps 2,800 kg - Steel plate on loading floor - Complete LED lighting - Anti-theft device - Fine-mesh or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - 30 cm extension sidewalls with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180 cm or 200 cm - Foldable crank rear supports Further accessories on request! Plus shipping to Gera and registration documents: €200 net Images are for illustration purposes only and may show optional accessories subject to extra charge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-18, maximum load weight: 2,981 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 306 184 3500 2 Internal dimensions: 306cm x 184cm Side wall height: 30cm Loading platform height: 65cm Gross weight: 3500 kg Payload: 2968 kg Braked tandem trailer Overrun brake and handbrake by AL-KO Largest possible brake specification Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension locks All sides fold down and are removable 15mm thick, non-slip, robust phenolic plywood floor Automatic jockey wheel with 400kg support load 8 noise-dampening lashing rings with 800kg tensile strength each Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on frame 13-pin plug LED marker lights at the front Rear lamps with reversing light, fog light, and triangular reflectors Optional accessories - Equipment for 100km/h (shock absorbers) - Spare wheel with bracket - Without side panels (discount applies) - Side wall extension to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps 2800kg - Steel plate on floor panel - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf mesh sides, also available closed - 30cm extension side panels with tension locks - Flat tarpaulin with or without hoops - High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustration purposes and may show optional accessories at extra cost. Hsdpfjghpbyex Amiol Haven’t found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 - 17:00 for all types of repairs. Specialist in axle repairs, also for caravans. Large range of rental trailers. We also offer a large selection of spare parts and accessories for trailers of all makes. Contact us for a telephone consultation, visit our website, or come see us in person.

Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room. The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather. The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers. Hsdpfx Amjrx Sn Tsiel Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, overall weight: 2,000 kg, empty load weight: 1,600 kg, maximum load weight: 400 kg, loading space length: 5,490 mm, loading space width: 2,290 mm, loading space height: 2,120 mm, tire size: 155r13c, Car trailer as a construction trailer for 12 people. The insulated *stay trailer* is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. An electric heater provides support in very cold weather. Self-sufficient thanks to WC in separate room with lockable door and storage room. The use of a crew trailer is possible on any construction site. As a normal *car trailer*, it can be driven to the construction site by a simple car. These vehicles are also used as *burro trailers*. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, extra room with outside door with chemical toilet and sink, storage room with door and shelf, stairs for hanging and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, Refrigerator, coffee machine, connection cable, 230V fuse box with RCD, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, four sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Hedpfsqwi Nksx Amiel Accessories for construction trailers include a toilet room with toilet, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, overall weight: 1,300 kg, empty load weight: 1,100 kg, maximum load weight: 200 kg, loading space length: 3,130 mm, loading space width: 2,167 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 4 people with toilet and storage. An insulated *team trailer* is suitable for all seasons. With a sandwich construction in 50 mm and 60 mm insulated floor, it can withstand heat and cold. In winter, the built-in heating provides support. To ensure that the replacement trailer is as self-sufficient as possible, it has a small built-in WC with chemical toilet. The recreation trailer can be used on any construction site. It can easily be towed to the construction site with a car as a *car trailer* and can also be used as a *burro trailer*. Hedpfxjqwi E Ie Amijl The standard equipment of the construction trailer includes an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, ISO floor in 60mm, PVC aud floor, chemical toilet in a small toilet room with washbasin, storage room with outside door and shelf, refrigerator, coffee machine, window with safety cover, 230V fuse box with RCD, sockets, switch and interior light, table and chairs for 4, shelf, coat hooks, four sturdy crank supports, power socket for 230V, connection cable, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drain, other sizes for up to 16 people, 100 km/h shock absorber and trailer lock.

Condition: new, Year of construction: 2025, functionality: fully functional, We would like to sell 28 rolls of Polyskin "S" Surlyn film – uncoated. Hjdpjx Tf N Refx Amijl Thickness: 0.150 mm Width: 540 mm Running length: 300 m

Condition: new, rated capacity 2,0 KW rated current 10/6,0 Ampere output voltage 2 x 230AC / 1 x 12DC V weight of the machine ca. 29 Kg dimensions of the machine ca. 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Hjdpfx Ameu Imhpoijl Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store.

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded Hedpfxou Imnve Amiol

Condition: new, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Wide trailer with support wheel and lattice walls Garden Trailer 230 KIPP Hedpfxet Id Tbs Amiol A wide trailer with jockey wheel from the KIPP Garden Trailer 230 series, dimensions 230 x 125 cm. The KIPP Garden Trailer 230 model is 19 cm wider than the KIPP Garden Trailer 200 model. The set includes: a support wheel, lattice sides and a flat gray tarpaulin. Sturdy support wheel from renowned German manufacturers. Galvanized steel grid sides, resistant to rust. With a flat gray tarpaulin, they create an excellent transport surface for transporting goods that require a dry and wide space during transport. An additional advantage of a wide trailer with a support wheel is the possibility of tilting it and folding the drawbar, which allows us to park the trailer vertically on the back and quickly unload loose goods. If you decide to purchase our new trailer, you will receive a 2-year warranty, thanks to which you can use it without fear of damage. We provide each product with a user manual and a warranty booklet. All important documents are delivered to you together with the purchased trailer. In addition, you can purchase additional equipment such as BIS side panels, tarpaulins with the H-800 frame or an anti-theft device and an aluminum cover at any time. If you have any questions or doubts while using the trailer, you can contact our specialists at any time. They will be happy to provide all the information and explain everything. In addition, our wide trailer with support wheel and lattice drop sides can be tilted thanks to an inclinable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or drop. This solution is also most commonly found in significantly more expensive caravans, which significantly improves the user experience. Another advantage of this solution is the ability to store the trailer in a vertical position with the drawbar folded in at the rear. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting in because of the protruding drawbar. You can even place it based on the front of the building or wherever you want!

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. Hsdpfemdq Tpox Amijl • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser Hedomdq Tajpfx Amiol QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. Hsdpfx Amomdqcnsiel • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Omicron Material Length: 5230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture Hsdemcbk Repfx Amijl • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Hodpfoma Aztjx Amiol Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Hsdpfx Amjma Azljiel Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture Hodpsmdq Thefx Amijl • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser Hedpfemdq S Dox Amiol QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Hodsmdq S Sspfx Amiel • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Hodjmdqfbepfx Amijl Length: 4 m Linear Unit: ProfiStop Omicron Material Length: 3230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.