Used Moore Tools 450-Cpr for sale (40,084)

Condition: excellent (used), color: yellow, Year of construction: 2014, Technical condition: very good Visual appearance: very good Production country: SE Please contact Vink Machinery for more information Scania R450 * 2014 * Lift-steer axle * 929,923 km * Euro 6 * Registration number 25-BDS-3 * Periodic vehicle inspection valid until April 1, 2026 * Price: €23,500 Lider Lowbed low loader * 2022 Njdpjygv N Hjfx Akcowf * Three axles * Double hydraulic adjustable ramp * Fixed neck * Double wheel well * Steering rear axle * * Price: €47,500

Condition: used, Year of construction: 2024, load capacity: 45,000 kg, lifting height: 15,100 mm, - Reachstacker für die Handhabung von Containern - Kapazität: -> 8'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 8'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 8'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 9'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3-high - Mast: langlebiger und geschweißter 2-stufiger Duplexausleger mit Kasten- und Teleskopausführung - Zwei Hubzylinder im Fahrgestell/Ausleger und ein Ausschubzylinder im Ausleger, Ausfahrhub von 7.000 mm für die Handhabung von bis zu 3 Reihen tief, normale Auslegerspitze - Toplift-Spreader für den Containerumschlag, maximale Tragkraft 45 Tonnen, teleskopierbar 20ft-40ft, 2 hydraulische Rotationsmotoren und 2 hydraulische Rotationsbremsen, für dauerhaftes und sicheres Handling - Seitenverschiebung ± 800 mm (insgesamt 1.600 mm) - Mechanische Pfahlneigung ± 5 Grad (Seitenneigung / Nivellierung durch Schwerkraft) - Motorische Drehung Grad - Endträger mit 4 starken Hebehaken für Schlingen (4 x 12,50 Tonnen Tragkraft), aber max. 45 Tonnen - Sicherheitsverriegelung mit 4 Ausrichtungsstiften und 4 Sensoren, montiert in Twistlock-Endträgern - An der Auslegernase montierte LED-Anzeigetafel für den Containerumschlag - In der Kabine montiertes LED-Head-Up-Anzeigedisplay für die Containerhandhabung - Motor: Dieselmotor Volvo TAD1181VE6 - 6-Zylinder-Reihenmotor, Turbolader und Ladeluftkühlung, Volumen 10,84 Liter - Leistung, Nenn-/Maximalleistung: 265/265 kW bei 2100 U/min - Drehmoment, max.: 1785 Nm bei 1400 U/min - Ölwechsel nach 1.000 h und Filterwechsel nach 1.000 h (ohne Ölprobenentnahme) - Getriebe Dana TE30510 - Automatische Lastschaltung und hydrodynamischer Drehmomentwandler - Sperrschutz für Fahrtrichtung – vorwärts/rückwärts. - Steuerung und Überwachung: Elektronischer CanBus. - Gänge: vorwärts 5 – rückwärts 3. - Kabine: Alle Schalter in der Kabine sind mit LED-Leuchten ausgestattet - Head-Up-Display in LED zur Drehverriegelungsanzeige. - 2 x 24-V-Steckdosen in den Türsäulen - Sitz Gammer Actimo XL, mechanische Feder, 3-Punkt-Sicherheitsgurt und hohe Rückenlehne, Kopfstütze - Elektrisch verstellbare Armlehne rechts. - Getönte/laminierte Fenster inkl. Schiebefenster in linker und rechter Tür - Scheibenwischer vorne (doppelt), hinten und Dachfenster - elektronisch gesteuerte Heizung/Lüftung inkl. Klimaanlage und Frischlufteinlassfilter, ausgeschaltet bei offener Tür - Komplette Türen mit Griff, Schlüsselschloss und Luftklappe (links und rechts) Nsdpfx Aey Hmf Tokcowf - Komplettes Manövriersystem rechte Konsole inkl. Standarddisplay (elektrisch verstellbar), Multifunktionshebel linke Seite. - Verstellbare Steuerung, Lenkradkonsole und Schalterfelder - Ergonomischer Joystick für Ausleger- und Anbaugerätefunktionen - Geschwindigkeitsregelpedal rechte Seite, Bremspedale linke und rechte Seite - Lenkrad mit Lenkradknauf. Sicherheitsübersteuerung für Hydraulikfunktionen (per Code) - Radio, MP3, USB, AUX, Bluetooth, Freisprechfunktion, RDS - 24/12-V-Konverter einschließlich vier 20-Ampere-Steckdosen an den vorderen Kabinenpfosten. 1 x 12-V-Steckdose, 2 x 5-V-USB-Steckdosen und 2 x 24-V-Steckdosen - Kalmar-Lenkachse mit doppelten Drehlagern, mechanischen Seitenanschlägen (±3 Grad) und elektrischer Servolenkung mit doppeltwirkendem Zylinder ermöglicht einen kleinen Wenderadius. - Hochleistungsantriebsstrang...

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Nodpfx Asy Egl Djkcjwf

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Dimensions (LxWxH): 80 x 65 x 200 cm Nwsdpjy Hpqfjfx Akcsf Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. Nodpfxsy Hfnmo Akcjwf These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: good (used), mileage: 794,439 km, power: 331 kW (450.03 HP), first registration: 01/2015, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,100 mm, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2015, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional options and equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - Radio/Cassette - Sleeper cab - Fabric - Additional braking system = Remarks = Number of axles: 3, Configuration: 6x2, Curb weight: 13,105 kg, Gross weight: 30,000 kg, Total tank capacity: 500 liters, Trailer coupling, Kingpin diameter: 50 DIN, Chassis height: 98 cm, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Climate control, Heated seats, Bluetooth, Flashing lights, Engine output: 331 kW (444 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission brand: Scania, Gears: 12, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further information = Transmission Transmission: SCA, 12 speeds, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 4 mm; Right tire tread: 8 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Inner left tread: 9 mm; Outer left tread: 8 mm; Inner right tread: 6 mm; Outer right tread: 7 mm Axle 3: Tire size: 385/65R22.5; Lift axle; Steered; Left tire tread: 4 mm; Right tire tread: 13 mm Weights Unladen weight: 13,105 kg Payload: 16,895 kg GVW: 30,000 kg Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years and price ranges. Why buy from Kleyn Trucks? Simply! • Large, fast-changing inventory • Recognized quality • Good prices • Reliable trading • We speak many languages • We understand our customers Nodpfx Aox Azy Iokcswf • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The security of ",recognizable quality" • And more.... Please visit our website for special offers and our complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Please ask directly about our European warranty package.

Year of construction: 2015, condition: used, Exhibit Storage location: Sonnefeld Nwsdpfx Akjv Dat Tscjf

Year of construction: 2002, operating hours: 74,500 h, condition: ready for operation (used), travel distance X-axis: 450 mm, number of axes: 3, This 3-axis Combitec CT-450 CNC Internal Cylindrical Grinding Machine was manufactured in 2002. It features a robust design with an included extraction system and fire extinguishing system. With approximately 74,500 operating hours, this machine shows age-related signs of wear on the guideways. If you are looking to get high-quality cylindrical grinding capabilities, consider the Combitec CT-450 machine we have for sale. Contact us for further details. • Machine type: CNC internal cylindrical grinding machine • Spindles: 1 • Voltage: 400 V • Frequency: 50 Hz • Operating hours: approx. 74,500 h • Condition: Age-related signs of wear on the guideways • Coolant system: Not included Additional equipment • Extraction system Njdpfsy E Sphox Akcswf • Fire extinguishing system

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input Nwsdpfx Akey Enwuecjf - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Year of construction: 2018, operating hours: 7,062 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Simatic HMI, overall weight: 50,000 kg, total height: 4,900 mm, pressing force: 459 t, table length: 1,000 mm, table width: 1,800 mm, This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours. Machine Benefits Qualitative Machine Benefits • Excellent condition, low hours. Technical Machine Benefits Nwsdpfx Aoy E Hr Djkcof • Ram size 900x1400 mm • Adjustable stroke 22-250 mm • Ram adjustment 120 mm • Max. Die surface 900x1650 mm • Max. Upper die weight 900 kg Dimensions Machine Depth 3100 mm

Year of construction: 2000, condition: used, Aufnahmen Divers K50 Diameter 50 mm Nwsdpfjy Eh Awox Akcjf +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2026, Bore 25 mm number 6 Dimensions (LxWxH) 155 x 140 x 130 mm weight - pallet system 14 kg Two new Toolholder for BMT 65 turret Nodjy Ehv Rspfx Akcewf Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Nsdpjx R D Adjfx Akcowf Various formats available Complete documentation

Condition: not inspected (used), Year of construction: 1970, functionality: unexamined, machine/vehicle number: 5206, grinding wheel diameter: 240 mm, table length: 450 mm, table width: 250 mm, power: 6.08 kW (8.27 HP), input voltage: 380 V, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 23.06.2026 to 26.06.2026! Nedpfey D Tvtsx Akcewf TECHNICAL DETAILS Magnet dimensions: 450 x 250 mm Grinding wheel diameter: 240 mm MACHINE DETAILS Operating voltage: 380 V Connection: 6.08 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 1,000 kg EQUIPMENT Side table Suitable accessories Magnets Three-jaw chuck Vice (jaw width: 60 mm) External reference: 21

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75385, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, spindle speed (max.): 2,500 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Spindle speed: 50 - 2,500 rpm Feed rate X/Y/Z-axis: 5 - 1,000 mm/min Rapid traverse X/Z-axis: 4 m/min Rapid traverse Y-axis: 2 m/min Nwjdjy D Swijpfx Akcsf Tool holder: ISO 40 Quill stroke of horizontal and vertical working spindle: 80 mm Table dimensions: 730 x 410 mm Number of T-slots: 8 MACHINE DETAILS Control: HEIDENHAIN TNC 135 Operating voltage: 380 V Frequency: 50 Hz Connection rating: 10 kW Rated current: 50 A Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,100 x 2,200 mm Machine weight: 2,000 kg EQUIPMENT Workshop drawer cabinet with SK 40 holders Clamping devices External reference: 13

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Njdpfx Akey D Shnocswf Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: not inspected (used), functionality: unexamined, total width: 300 mm, total height: 1,000 mm, total length: 1,000 mm, overall weight: 70 kg, drive type: akkubetrieben, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Type of operation: Battery-powered MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 300 x 1,000 mm Weight: 70 kg EQUIPMENT Strapping band External reference: 6 Nodpfx Akoy D Sfmjcowf

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg Njdpey Ehyijfx Akcjwf good condition

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm Nwodpfxey Dc U Eo Akcjf

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Nwedpfx Asy Ed Sbokcjf Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Nwodpfx Akewid Specof Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, functionality: fully functional, inner diameter: 900 mm, Used steady rest for conventional POREBA TR-115 lathes – Ø 450 mm, roller type Nsdpfxjy E Nxmj Akcswf For sale: used steady rest designed for conventional POREBA TR-115 series lathes. Equipped with rollers to ensure stable support of the workpiece during machining. Technical data: Diameter range: 450 mm Type: roller steady rest Condition: Used Description: Perfect for machining long and heavy workpieces. Improves machining accuracy and reduces vibrations.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet Nwodpfx Asy Egccekcsf - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: good (used), lathe pressing tool, roller block, support roller Nwsdpfx Akswvfwgscef -Support roller: solid design -Roller: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Quantity: 1x roller stand available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/pc.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Nwjdey D Tl Ispfx Akcof Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.