Used Single Sheet Gatherer for sale (15,507)

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm Bljdpfxoy Ig Nbe Akxsg throat 150 mm dayligth 450 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: refurbished (used), Year of construction: 2002, Very good condition electric bending machine with automatic backstop and controlled beam. Straight knife on one side, segmented tools on the other. The machine has been updated, with a new Easy link controller, touch screen. Bljdpfxevyr D Ne Akxog Specification: Manufacturer: CIDAN Model: K15-25 Combi Year of manufacture: 2002 Working length: 2550 mm Thickness: 1.5 mm Backstop: Automatic 1550 mm Control system: Updated Easy link system Other: Reversible beam, with segmented tools. If you have any more questions, we will be happy to answer.

Condition: used, Belano sheet metal sheet stiffening and profiling machine. In good condition. For stiffening sheet metal used in the manufacture of ventilation ducts, where the metal needs to be reinforced to avoid unwanted vibration. If you have any further questions, we will be happy to answer them. Bsdpfxorhkkyj Akxelg

Condition: used, Year of construction: 2000, Very good condition electric bending machine with automatic rear support. Recently fully serviced. Connected, available for testing. Specification: Manufacturer. Model: KMP-31/2.0 Year of manufacture: 2000/03 Working length: 3100 mm Bending thickness: 2.0 mm Rear support: Automatic 1000 mm Bodpetq El Hefx Akxolg Control system: Upgraded Simens system Other: Spare blade included. Full service with some new parts. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2016, Very good condition electric bending machine with automatic backstop. Blsdpov Ac S Njfx Akxjg Specification: Manufacturer: Schröder Model: MAKV Year of manufacture: 2016 Working length: 3200 mm Bending thickness: 1.5 mm Backstop: Automatic 10 – 1000 mm Control system: POS 2000 Other: Top beam tool 20°. Bending beam tool 10 mm. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2004, Sheet metal stiffening and profiling machine Schechtl SZP 250. Designed to stiffen metal sheets used for the production of ventilation ducts, where the metal must be reinforced to prevent unwanted vibrations. Bledpfx Aksrzawgjxog Specification Model: Schechtl SZP 250 Year: 2004 Working length: 2500 mm. Thickness of the processed metal: Steel (400N/mm2) 1.5 mm. Aluminum (250N/mm2) 2 mm. Stainless steel (600N/mm2) 1 mm. Dimensions: length, width, height 3215 x 1270 x 1150 mm. Weight: 880 kg. If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 2010, Manual bending machine Schroder with segmented tools. Specification: Manufacturer: Schroder Model: ASK II 1000/2.0 Year of manufacture: 2010 Made in: Germany Working length: 1000 mm Bending thickness: 2.0 mm Weight: 380 kg Bsdpowq D N Rofx Akxslg Other: one upper tool is missing (Horn tool)

Condition: used, Year of construction: 2019, Good condition electric bending machine with automatic back rest. Machine with Easy link control, touch screen and automatic back rest. Specification: Manufacturer: CIDAN Model: K15-25 Year of manufacture: 2019 Bsdpfx Ajwqk Nwskxolg Working length: 2550 mm Bending thickness: 1.75 mm Back rest: Automatic 1550/1050/1550 mm Control system: Easy link Weight: 2 T Other: The bending beam tools are available in three sizes: 7 mm, 10 mm and 20 mm wide. Delivery: In August (reservation possible) If you have any more questions, we will be happy to answer.

Condition: used, functionality: fully functional, Year of construction: 2020, control type: CNC control, degree of automation: automatic, working width: 2,500 mm, Folding machine SCHECHTL MAX 250 for sale (Year: 2020) Bljdpexmfbwjfx Akxjg Condition: Very good, minimally used. The machine is fully functional and suitable for professional sheet metal processing. Manufacturer: SCHECHTL Maschinenbau GmbH (Germany) Model: MAX 250 Robust, precise, and reliable motorized folding machine designed for accurately bending various types of sheet metal. Technical data: Working length: 2,500 mm Max. bending thickness: 2.0 mm Back gauge travel: 750 mm (motorized) Control system: included (CNC/electronic control) Bending beam tools: 10 mm and 25 mm Year of manufacture: 2020 If you have any further questions, we are happy to assist.

Condition: used, Good condition electric bending machine with automatic back rest. The machine has been updated, with a new Easy link controller, touch screen and automatic back rest. Blodpfowpfdmjx Akxjg Specification: Manufacturer: CIDAN Model: K15-25 Year of manufacture: 1989 / updated 2025 Working length: 2500 mm Bending thickness: 1.5 mm Back rest: Automatic 1550 mm Control system: Updated Easy link system Weight: 2.1 T Other: Upper beam tool parameters: 30° 2.5 mm. The bending beam tools are available in three sizes: 7 mm, 10 mm and 20 mm wide. Delivery: September (reservation possible) If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Bljdjwmk Ewjpfx Akxeg Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: new, Year of construction: 2025, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Bsdpjwd Emksfx Akxolg Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: like new (used), Year of construction: 2023, 2023 BUD-MASZ fencing production line, very little used. Made in Poland. Practically new. Line connected, available for testing. Sheet width used for production - 138,8 mm (‡ 5 mm) contour, sheet grade DX51D+Z; S220GD+Z groove pattern DX53D+Z - 1 groove pattern, sheet thickness from 0,50 to 0,60 mm. The line consists of Decoiler 2T Pulling module Forming module Blodpfsrf Uz Dex Akxog 2D guillotine 3D guillotine Receiving table Controller with touch screen Fence boards in production Sheet width: 138.8 mm (‡ 5 mm) Width of produced sheets: 107.5 mm Height of the raised outline: 20 mm For more dimensions, see drawing. If you have any further questions, we will be happy to answer them.

Condition: used, power: 115 kW (156.36 HP), Year of construction: 2021, operating hours: 3,360 h, Year of manufacture: 2021 Empty weight: 16.000 kg Bljdpfoxb Aymsx Akxjg Dimensions (LxBxH): 595 x 231 x 296 cm Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: used, Year of construction: 2020, operating hours: 2,070 h, Year of manufacture: 2020 Empty weight: 11.200 kg Dimensions (LxBxH): 585 x 228 x 296 cm Bsdpfx Aksxq Ryaoxolg Engine type: Deutz Deutz TCD 4.1 L4

Condition: used, color: orange, Year of construction: 2020, operating hours: 3,380 h, Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Bedoy Egcvspfx Akxelg Roller width: 2140 mm

Condition: used, fuel tank capacity: 340 l, Year of construction: 2007, operating hours: 7,510 h, Year of manufacture: 2007 Empty weight: 19.000 kg Dimensions (LxBxH): 634 x 230 x 302 cm Engine type: Deutz Deutz TDC 2012 L06 Bljdpjx Sqg Sjfx Akxsg = Additional options and accessories = - 1 fuel tank

Condition: used, Year of construction: 2020, operating hours: 3,030 h, Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Bedpfx Akjygu Rvsxelg Engine type: Deutz DEUTZ TCD4.1 L-4 Roller width: 2130 mm = Additional options and accessories = - Seat heater

Condition: used, Year of construction: 2020, operating hours: 2,960 h, Year of manufacture: 2020 Empty weight: 16.000 kg Bsdpfsxqfdtsx Akxjlg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, Year of construction: 2021, operating hours: 2,890 h, Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm Blsdpfx Aksykq A Asxsg

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,680 h, Year of manufacture: 2021 Empty weight: 16.000 kg Bodpfx Ajx Sqhiokxolg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Bljdpfxjy H Idds Akxog Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good Blsdsyakn Rjpfx Akxeg High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Key Features & Benefits Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, Year of construction: 2004, control type: CNC control, controller model: POS 2000, type of crowning: manual, sheet thickness steel (max.): 6 mm, Swing Bending Machine Make: Schröder Model: MAK 4 3000/6 New Control Unit 2026, Year of Manufacture: 2004 Technical Data Bsdpfxjy E R Ive Akxolg Manufacturer: Schröder Model: MAK 4 3000/6.0 Year of Manufacture: 2004 Working Length: 3020 mm Bending Capacity: 6.0 mm Net Weight: 9,700 kg Upper Beam Stroke: 400 mm Folding Beam Lowering: 80 mm Lower Beam Lowering: 80 mm Lower Beam Adjustment: 10 mm Folding Beam Adjustment: 47 mm Dimensions: 4.7 x 2.6 x 1.85 m Equipment: - Dual-sided folding beam drive - Upper beam drive via ball screw - Hydraulic tool clamping for upper beam - Crowning device for folding beam (Schröder system, manual) - Motorized, programmable folding beam adjustment - POS 2000 2D graphic control (brand new in 2026) - Support table with ball rollers - Backgauge 10-1500 mm, pneumatically retractable Tools: - Sharp rail o 30° R 1.5 mm - Gooseneck rail o 130 mm (deep design) o 3000 mm segmented - Bending rail 15 mm - Reinforcing rail 25 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, Hydraulic Swing Bending Machine Manuf. HOCHSTRATE Model 3000/6 Year 2011 Technical Data Bljdsy E Ii Rjpfx Akxog Manufacturer: HOCHSTRATE Model: 3000 x 6 Year of manufacture: 2012 Sheet width: 3040 mm Bending capacity: 6 mm (400 N/mm²) Stroke: 300 mm Motor power: 7.5 kW Dimensions: approx. L 4.80 x W 3.60 x H 2.30 m Weight: approx. 6.5 t Equipment • Powered back gauge 1500 mm with ball transfer support table • Siemens S7 CNC control unit • Automatic upper tool clamping • Motorized bending beam adjustment • CNC-controlled crowning • Adjustable pressure for the upper beam • Gooseneck rail H 230 mm, with corner segments, L = 3,000 mm, sectional • Bending rails 6 mm, 20 mm, 30 mm • Continuous sharp rail 45° • Operating instructions All data subject to change without notice. A demonstration can be arranged at any time in our showroom.