Used Squaring Lines for sale (9,548)

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer Cgedpfx Aovu Tufonwot

Condition: used, Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label box (2005) - Labelling machine (KHS Roland, 2009) - Best-before date detection device (2011) - Air knife blow-off system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks, each with a capacity of 20 hl - Free, powered conveyor lines for bottles and crates Cgodpfx Ajyr N Utjnwet Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, 2 x stretch blow moulding machines, premixer, Velcorindo dosing, cap feeding and conveying, rinser/filler/capper, labelling machine, date coding, packer, best before date detection device, bottle blowing, bottle air transport, suction system, CIP system, free crate and bottle transport

Condition: used, Reusable glass bottle filling line for mineral water and soft drinks, consisting of the following components: - Depalletising with pallet feeding (Schaefer, approx. 1989) - Unpacker (KHS with conversion by Paxona) - Crate washer for crate spraying - Unscrewing machine (Adelski) - Bottle cleaning machine (Krones, 2001) Single-end machine - Empty bottle inspector (Krones) with ejection and glass shredder - Glass bottle short tube filler (Krones, 2002) with cappers for crown caps and screw caps + cap inspection - Labelling machine (Krones, 2009) for cold glue labelling of paper labels + label inspection - Packer (KHS with conversion by Paxona) - Depalletising (Schaefer, approx. 1989) - Free transport for bottles and crates - CIP system with 3 containers - Premix system Translated with (free version) Additional title: Reusable line; years of manufacture approx. 1989-2012 Cgedpfxeyxnd Ie Anwst Capacity: 11800 bo/h referring to 1.0 l bottles Formats: 0.33 l; 0.5 l; 0.8 l; 1.0 l; - Screw caps and crown caps Operation / Control: Krones Features: pallet loading; depalletising; de-crater; crate washer; unscrewing machine; bottle cleaning machine; glass bottle filling and capping machine; cap inspection; labelling machine; label inspection; crater; palletising; free crate and bottle transport; CIP system; premix system

Condition: used, Year of construction: 2000, Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletising and palletising Cgjdpfx Anox T Ak Sswst Unloading capacity: 3600 crates/h Loading capacity: 3600 crates/h Power: 21 kW Voltage: 230/400 V Frequency: 50 Hz Compressed air: 6 bar, 30 Nm³/h Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x 1.5 l (300 x 200 x 365 mm) Running direction: right -> left Operation / Control: at control cabinet, Simatic OP17 / Simatic S7-300 Material: housing/frame constructions in black steel Position: free-standing with floor fixings Features: Pallet loading and unloading, roller conveyors, lifts for 1 x empty and 1 x full pallets, Eurapack pallet securing with cord extractor, unloader, pallet magazine, loader, Bornbinder pallet securing, protective grids, stairs and platforms, switch cabinets Layer patterns: composite stacking up to 5 layers

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Codpfxevu Tt Ij Anwogt Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Cjdpfxoxbnylo Anwogt Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table

Condition: used, Bottling line for approx. 5000 bottles/h Additional title: returnable glass bottle filling, years of construction 199 Cjdpfsvcqd Tox Anwsgt Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, , bph, empty bottle inspector (Heuft Reflexx InLine IR, , bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Current: 1,85 A Csdpfx Ajvcqpijnwsgt Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Cjdpjvu Tthofx Anwjgt Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 Cjdpfov I Akvjx Anwogt - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: ready for operation (used), Year of construction: 1999, operating hours: 49,800 h, functionality: fully functional, machine/vehicle number: 10992, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and Raziol EBAD 4000 strip lubrication system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, and HURAS HPK 1500-220 horizontal decoiler (2013). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 10992 Year of Manufacture 1999 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 49,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 66 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Cgjdoy I A U Tepfx Anwet Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2013) Includign Raziol EBAD 4000 Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: ready for operation (used), Year of construction: 2001, operating hours: 46,500 h, functionality: fully functional, machine/vehicle number: 11623, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and EFD Micromat strip lubrication. The line includes a sound-insulating safety cabin, finished-parts output conveyor, PBK PE 250/200 USG coiling machine (2004), and HURAS HPK 1500-220 horizontal decoiler (2015). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 11623 Year of Manufacture 2001 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 46,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 74 kVA Main motor power 22 kW (AC inverter-driven) Cgedpfx Aoy I A Rzsnwet Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2015) Including PBK PE 250 200 USG Coiling machine (2004) Includign EFD Micromat Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: used, Year of construction: 1987, Strip feed line for sheet metal coils with integrated straightening and feed unit. Cjdpfx Aoyyn Dqonwjgt Manufacturer: Müller Weingarten Model: UWR 80.4 Year of manufacture: 1987 Strip width: 60 – 700 mm Sheet thickness: 0.5 – 4 mm Feed length: 0 – 700 mm, infinitely adjustable

Condition: used, Year of construction: 1988, Strip feed line for sheet metal coils with decoiler and integrated feeder unit. Manufacturer: H. Schleicher GmbH & Co. Model: RMS 8-70/160-650 Model: HE-200-900 Spz Year of manufacture: 1988 Csdpsyyn Icefx Anwjgt Strip width: 100 – 600 mm Strip thickness: 0.5 – 3 mm Max. load: 11 t Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW

Condition: used, Year of construction: 1985, Strip feeding line for automatic supply of sheet metal strip in press lines. Manufacturer: Müller Weingarten AG Cgedpoyyclcsfx Anwst Type: UWR 60.4 Year of manufacture: 1985 Strip width: 0–600 mm Sheet thickness: 0.5–4 mm Feed length: steplessly adjustable 30–500 mm

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Cjdpfx Anju Tg Nnowogt Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Cgjdeu Tg I Dopfx Anwjt Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Cedpfx Aney I Sncewjgt Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: excellent (used), functionality: fully functional, conveyor belt width: 650 mm, input voltage: 400 V, total length: 7,600 mm, working width: 650 mm, total width: 950 mm, total height: 915 mm, TOP fine pastry line Rondo model: PMML 102.B Stainless steel design LED panel Cutting station for 2 rollers Folding shoes and rolling unit Filling unit/dispenser Calibrator/calibration head with Mehler Moistening unit Mobile table Guillotine max. 100/min Working width 650 mm Connection 400V, 16A-CEE plug Dimensions: 7600 x 950 x 915 mm (W x D x H) Codpfjy Ild Rsx Anwsgt Used machine We have more bakery machines in stock!

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Cjdpfx Ajyvilzenwsgt

Condition: used, Year of construction: 2017, operating hours: 30,000 h, machine/vehicle number: LC566, Cjdoy I R Eaepfx Anwegt Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging

Condition: used, Year of construction: 2010, machine/vehicle number: LC625, Used ALFA LAVAL S16 Olive Oil Line - year 2010Technical Specifications & Performance DataThis complete olive oil extraction line assembles proven components to deliver continuous, efficient processing of olive paste into high-quality oil. Designed around Alfa Laval core technology and complementary equipment, it offers industrial-scale throughput with reliable separation and thermal conditioning.Capacity: 2.5–3 t/h (tonnes per hour) of olivesManufacturing year: 2010Main manufacturer: Alfa LavalDecanter: Alfa Laval S16Separators: Alfa Laval 507 (2 units, with support frame)Crusher: Alfa Laval, 25 HPWasher: Santoro washer with destonerMalaxers: 4 units, stainless steel, 500 L each, independent dischargePaste pump: Bellin, stator size 16Elevator belt: Alfa LavalPomace screw conveyors: Officine MottolaThermal unit (boiler): D’Alessandro Termomeccanica CS 130, nominal output 130 kWHeat exchanger: Hot-water heat exchanger for thermal conditioningElectrical panels: Main electrical panel and dedicated pump control panelElectrical data (boiler): 380 V, 50 Hz, electric absorption 0.42 kWStandards: CE componentry; boiler EN 303-5 Class 3Advanced Automation & Control SystemsThe line features centralized power distribution via a main electrical panel and a dedicated pump control panel for modular equipment management. Operators benefit from straightforward control of feed, crushing, malaxing, decanting, and separation stages. Safety interlocks and standard protections on rotating equipment and hot-water circuits support consistent, secure operation. Quick mechanical adjustments enable fine-tuning of malaxing time and thermal setpoints for optimal extraction efficiency and quality.Production Line Integration CapabilitiesEngineered for continuous extraction, this second hand processing line integrates upstream receiving and washing with downstream decanting and polishing. The elevator belt, washer with destoner, and crusher ensure uniform paste preparation, while the decanter and twin separators provide high-clarity oil. The system can be connected to storage tanks, filtration skids, or paired with a used bottling line for edible oil to complete industrial packaging workflows. Flexible piping and standard connections simplify integration into existing food and beverage production facilities.Machine Condition & Maintenance HistoryThis is a complete, second hand olive oil extraction line offered in working condition with a 2010 build year for the core process equipment. Components from leading manufacturers such as Alfa Laval, Santoro, Bellin, Officine Mottola, and D’Alessandro Termomeccanica support dependable operation and serviceability. The line configuration and included equipment reflect an industrial-scale installation ready for recommissioning.Operational Performance & VersatilityThe washer with dest... Cgsdsy Iz Tuepfx Anwst

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Csdpfx Aoyhbhqjnwjgt

Condition: used, machine/vehicle number: LC505, Used Bottling Line BERTOLASO for still wine and alcoholic beverages 4000 bph 0.75L The BERTOLASO used bottling line for still wine and alcoholic beverages operates at different speeds depending on the bottle size. Firstly, the machine fills 0.75 L bottles at a maximum speed of 4000 bottles per hour (BPH). Additionally, it processes 1.5 L bottles at 3000 BPH. Moreover, for 0.50 L bottles, it reaches 5000 BPH, and for the 0.25 L format, it achieves 8000 BPH. As a result, this flexibility allows the machine to adapt to various production needs. Technical characteristics of containers and filling The line fills glass containers of multiple sizes using the low vacuum filling method. In particular, this method ensures delicate handling of products like still wine and alcoholic beverages by minimizing oxygen exposure during bottling. Consequently, it reduces product oxidation and preserves the organoleptic qualities of the liquids. Furthermore, this method guarantees high-quality preservation, making it an ideal choice for producers. Cgodpfevgvgbex Anwjt Compressor details Next, two compressors ensure a constant supply of compressed air. The Abac VT 1510 compressor, manufactured in 1999, operates at 10 bar. In addition, the ALMiG Flex 15 compressor, built in 2011, provides 11 bar of pressure. Together, these compressors maintain efficient and reliable plant operations, thus ensuring uninterrupted production. Handling and filling machines Moving forward, the Bortolin Kemo F.C.T depalletizer, made in 1994, automatically moves the empty bottles. Meanwhile, the Cobert Ambra 24 filling machine from 1995 ensures precise and reliable filling. For capping, the line uses two machines: the Bertolaso Sigma from 1995 and the SIEM Ta77 from 2007, which provide compatibility with various cap types. In this way, the system maintains versatility. Additional support machines Moreover, the line includes an Enos capsuling machine from 2002. Similarly, it also uses two labeling machines: the P.E. Labellers Modular Plus 450-5-4P-0-2 from 2014 and the BRB Globus Mega-s from 1999, which applies labels with cold glue. Afterward, the Bortolin case erector from 1994 forms the cases, while the Bortolin case packer, also from 1994, packs them. Finally, the SOCO System case sealer from 1998 seals the cases. At the end of the process, the Cosmapack palletizer and pallet wrapper from 2002 handle the palletizing and wrapping procedures. Conclusion of the Used bottling Line BERTOLASO for still wine and alcholic beverages 4000 bph 0.75L To summarize, this used bottling line offers producers of still wine and alcoholic beverages flexible and reliable production. Because of its ability to work at different speeds and handle multiple formats, the Used bottling Line BERTOLASO for still wine and alcoholic beverages 4000 bph 0.75L provides a versatile solution for various product requirements. Therefore, it stands out as an ideal system for meeting diverse production goals.

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Cgedpsvgvwmjfx Anwst Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.