Used Barth Vmph 3013 for sale (218)

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Lsdpfx Asx Eudnjk Djaa

Condition: ready for operation (used), Siemens 1FT7034-1AK71-1CH1 synchronous motor, encoder AM24DQI / brake 24VDC 6.8W 3Nm, serial number: YFK5643709903013, used, in good condition, 100% fully functional, scope of delivery as per photos. Lodpsx Dux Hofx Ak Deaa

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Lodpfx Aksyfrpmo Djaa Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), empty load weight: 12,500 kg, lifting height: 13,000 mm, Year of construction: 1997, operating hours: 4,103 h, number of cylinders: 4, load capacity: 3,000 kg, TECHNICAL DETAILS Lasdpfxsw Elf As Ak Dea Lifting and Carrying Lifting height: 13,000 mm Lifting capacity: 3,000 kg MACHINE DETAILS Power: 83 kW Fuel type: Diesel Number of cylinders: 4 Drive: Wheel Unladen weight: 12,500 kg Payload: 3,000 kg Permissible total weight: 15,500 kg EQUIPMENT extendable mast

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: Lajdpfxeidmkro Ak Dea KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: new, Elau SX-1/22/1/0/8 m FB1 SV 5.13 L1 Card Id. 11130135 SN:911297.0010, unused in opened original packaging, 100% functional, scope of delivery as per photos Lsdpfx Akev E Tuao Djaa

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 98300 € 1857.87 € 135 to 3050 mm Y1 / Y2 / X und R Achse 265 mm 2600 mm 410 mm 530 mm hydraulisch 200 mm/s 10 mm/s 200 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2x4 kW 4200 mm 1680 mm 2750 mm 9500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes Lodpfx Akjwirr Rs Doaa CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 114100 € 2156.49 € 135 to 3050 mm 4 320 mm 3340 mm 500 mm servomotorischer Riemenan 100 mm/s 10 mm/s 100 mm/s 650 mm 250 mm 4200 mm 2200 mm 2550 mm 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, Laodowirkyjpfx Ak Dea by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection Laedpfx Akjq Rdtqe Doa - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). Lajdpfxewry R Tj Ak Dea The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: as good as new (ex-display), Year of construction: 2017, Conveyor belt / belt conveyor Belt width: approx. 300 mm Center distance: approx.3,130 mm Drive: 0.75 kW As good as new - only in use for a very short time Lajdpfx Aef Rlgkek Dsa

Condition: good (used), RS Elektronik 30132-18842 BS Plug-In Card Lajdpfx Ajvx T Utsk Doa We have two pcs in stock, price is for one pc only.

Condition: used, functionality: fully functional, Leica Leitz DMRB 301-371.010 Microscope. The Leica Leitz DM RB microscope provides enhanced object identification by using fluorescence illumination. It also allows bright and darkfield illuminatio techniques, phase contrasts, and condenser height adjustment. Lasdpfx Aouax E Uok Dea Good working condition. Please check out our other listings as well.

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and Lodpfx Aksux Si Hs Deaa insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: Laedjyu Sn Uopfx Ak Doa - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Condition: used, functionality: fully functional, tank capacity: 20,000 l, usable tank capacity: 20,000 l, total height: 7,010 mm, inner diameter: 2,000 mm, wall structure: single-walled, operating pressure: 11 bar, Compressed air tank 20,000 liters Manufacturer: OKS Volume: 20,000 liters Operating overpressure: + 11 Bar Test pressure: + 14.3 Bar Operating temperature: + 50°C Dimensions: Overall height: 7,010 mm Lajdpfx Akswrn N Rj Dja Cylindrical height: 5,710 mm Diameter: 2,000 mm Inside the cylinder: 1 x manhole (320 x 420 mm) 3 x threaded sleeves 1" 1 x flange connection DN100 PN16 DIN 2633 In the top head: 1 x threaded sleeve 1" 2 x crane lugs In the bottom head: 1 x threaded sleeve 1" 4 x pipe feet Incl. complete technical pressure vessel documentation

Condition: ready for operation (used), functionality: fully functional, mileage: 27,000 km, power: 380 kW (516.66 HP), first registration: 11/1998, fuel type: diesel, overall weight: 26,000 kg, axle configuration: > 3 axles, fuel: diesel, color: red, gearing type: semi-automatic, number of seats: 3, total length: 8,050 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 1998, Equipment: additional headlights, car registration, fog lights, full service history, GTLF - TLF 10000, Rosenbauer body, 5000 liters of water 5000 liters of foam Lajdpfxowihaqo Ak Doa Or 10000 liters of water only RM 60 E monitor, 80-meter throw range, 40-meter NW38 rapid attack system 2 Barth trailer hose reels, each with 3 x 20-meter compressed air hoses, auxiliary heater, rearview camera, EPS circuit, Delta-Matic foam proportioning system

Condition: excellent (used), Year of construction: 2009, Atlas Copco BD1400 heat regenerating adsorption air dryer Manufacturer: Atlas Copco Model: BD-1400 CE 400V/50 Hz, PDP-40 Year of manufacture: 2009 Volume: 3120 liters Working pressure: 11 bar Volume flow FAD: 1400 l/s / 5040 m³/h Voltage: 400 V / 50 Hz Power consumption: 32,5 kW Dimensions: approx. 2,720 x 2,639 x 2,548 mm Weight: approx. 4,500 kg Lasdpshl Sfdjfx Ak Dsa The dryer incl. control were last in use and are in very good condition. The unit can be inspected by appointment in our warehouse in 76694 Forst.

Condition: used, For sale is an agitator motor from YTRON. It is the model Y11.00FC-4/II10-IV. Lsdpfx Aoga Dx Tok Djaa Data on the motor: RPM: 1470 V: 480 kW: 11 Connection: DN200 further data see type plate

Condition: used, Dispensers and various liquid gas tanks in different sizes are for sale: Laodpfx Aksvf I Eme Doa Capacity: 2,700 liters: Diameter: 1,250 mm Length: 2,480 mm Height: approx. 1,700 mm Operating pressure: 15.6 or 16.7 bar Medium: LPG Quantity: 10 pieces Capacity: 4,800 liters: Diameter: 1,250 mm Length: 4,200 mm Height: approx. 1,550 mm Operating pressure: 15.6 bar Medium: LPG Quantity: 10 pieces We will be happy to send you comprehensive data on the tanks if you are interested.

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Laodpfxotyz Izj Ak Dsa Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Condition: ready for operation (used), Year of construction: 1993, Underground liquid gas tank farm incl. pumps and control system The tank farm was used to store propane/butane and consists of the following tanks: 2 x 93,674 ltr. (15.6 bar, year of construction: 1993, ø 2,000 mm, storage medium: propane/butane) Laodpfju Awitjx Ak Dja 1 x 79,208 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 58,101 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 52,145 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) The tanks are buried underground and each has a dome shaft and corresponding monitoring fittings. The filling station incl. gas displacement line is available and installed (see photos). Five self-priming side channel pumps (Sterling, model CEHB) are installed for withdrawal. The system control is available and installed. All documentation is available.

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station Laedpok H Sfhjfx Ak Doa - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Standing on foot-ring aluminum silo (polypropylene plastic granulate storage silo) – used – designed for a bulk density of 0.8 kg/dm³ Volume: 125,000 L Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 20,000 mm Total height: approx. 21,250 mm (incl. 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Lsdpfx Aou I U D Ssk Deaa Upper head roof slope: 15° Equipment and connections: In the upper head: 1 x manhole and vent opening DN 600 with cover 2 x flange DN 100 (filling spout + SiloPilot) 1 x threaded socket 1 1/2" (level probe) 1 x roof edge railing with handrail 2 x lifting lugs On the shell: 1 x access door 850 x 1800 mm 9 x pipe clamps ø 108 mm for filling pipe 1 x filling pipe DN 100, ending below in TW-connection 1 x cable protection pipe DN 50 Various pipe passages in the lower base ring area The silo is equipped with a 60° cone at the bottom, ending in a DN500 flange. At the bottom/cone: 1 x extraction nozzle 1 x threaded socket 1 1/2" (empty indicator) The currently connected measuring and control equipment is included in the above offer, but we cannot provide any guarantee for its functionality. Optionally available: staircase ladder with back protection (additional price: €1,950) Otherwise as per pictures and drawings.

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Lajdpfx Aety Tidok Doa Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Number: 4 Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration