Used Deufra Actuator for sale (530)

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A Nledpfxjyrd U Uj Akqsa - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Nodpeyzumzjfx Akqsla Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 8,200 mm, loaded height approx. 900 mm, 20 lashing rings each 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable ramps, spring assist for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or ratchet straps, contour marking according to regulations, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators. Surcharges for: Warning panels + lighting + beacon = Price: €800, Widening to 3 m = Price: €1,100, hydraulic one-piece ramps €500, hydraulic ramp displacement? = Price: €1,000, digger shovel recess = Price: €1,000, Also available with 9.20 m loading platform length from stock. Njdpfx Ajy Dkb Hekqjla -- Subject to typographical errors, mistakes and changes, sample images -- More details available on request!

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. Nlsdpfx Ajy Akpuekqoa warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: excellent (used), Year of construction: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle configuration: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Nsdey Enlfopfx Akqsla Adjustment range of jointer spindle: 5 mm Jointer spindle motor: 5.5 kW Top spindle motor: 4.5 kW Vertical spindle motors: 7.5 kW Motors with brake Feed roller diameter: 140 mm Length of jointer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller upstream of first lower spindle, pneumatically actuated Left pressure roller before machine infeed CE compliant Including 4 planing heads Approx. dimensions (L x W x H): 3,000 x 1,250 x 1,550 mm Weight approx.: 1,000 kg Note on used machinery: • Technical specifications and prior sale subject to change. • Stated prices are ex works, free loading at location! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Year of construction: 2004, operating hours: 19,052 h, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: 21i TB, overall weight: 4,000 kg, total width: 3,000 mm, total height: 2,200 mm, spindle motor power: 7,500 W, product length (max.): 3,500 mm, spindle speed (max.): 3,200 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2004. This STUDER S33 CNC features a Z-axis travel of 1000 mm and an X-axis travel of 285 mm. It is equipped with a grinding spindle diameter of 73 mm and can handle a maximum workpiece length of 1000 mm, with a weight capacity of 120 kg. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. • Distance between centers 1000 mm • Center height 175 mm • Max workpiece length 1000 mm • Max workpiece diameter 175 mm • Max workpiece weight 120 kg • Workpiece weight between centers max. 80 kg (1000 mm) • Workpiece weight between centers max. 120 kg (650 mm) • Swiveling worktable ±8.5° • Granite machine bed S103 • X-axis travel 285 mm • Z-axis travel 1000 mm • Programmable feed rate 0.001–5000 mm/min • Direct measuring system X-axis resolution 0.0001 mm • Direct measuring system Z-axis resolution 0.0001 mm • Grinding spindle head swivel range 0°–30° • Grinding wheel diameter max. 500 mm • Grinding wheel width 63 mm • Grinding wheel bore 203.2 mm • Grinding spindle diameter 73 mm • Grinding spindle motor power 7.5 kW • Spindle speed 3200 rpm • Workhead spindle bore 30 mm • Workhead drive power 3 kW • Roundness accuracy at least 0.0004 mm • Tailstock quill diameter 50 mm • Tailstock taper MK3 • Hydraulically actuated tailstock quill • Pneumatic tailstock movement • Power supply 400 V ±10% • Frequency 50 Hz ±1 Hz • Control voltage 24 V DC • CNC control Fanuc 21i-TB • Program memory 64 kB • Program capacity 125 programs • Coolant system for emulsion • Coolant pump capacity 40 l/min at 3 bar • Paper band filter capacity 375 liters • Filter fleece width 1000 mm • Mist extraction capacity up to 1800 m³/h Nledpjy Alfwefx Akqoa • Machine dimensions 3.5 m x 3 m x 2.2 m • Machine weight 4000 kg • Machine lighting 24 V 36 W • Utilization 40% Additional equipment OPTIONAL for an additional charge • 9x flange • 1x Studer steady rest with protective cover • Balacing device

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Nlodpjyr I Irsfx Akqja Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 1,500 mm, total width: 1,200 mm, total height: 1,700 mm, The COUDERT pneumatic dosing machine is specially designed to maximize efficiency in the dosing of food products. Thanks to its syringe-type mechanism, it guarantees precise dosing, ensuring consistent dispensing every time. The pneumatic actuator draws the product into a dosing chamber before transferring it to the dosing tool, providing smooth and efficient handling. Furthermore, this dosing machine is equipped with a turntable, which improves production flow. It also facilitates the positioning of packages at the beginning of the line and prevents jams at the end of the process. Thus, it offers a flexible solution for adapting workflows to specific needs. In summary, the COUDERT dosing machine integrates perfectly into packaging lines, providing precise control and optimized production. Thanks to its reliable operation, it helps maintain consistent quality and improve productivity in demanding production environments. Nledpou Ibb Dsfx Akqea Technical specifications: This Coudert Co pneumatic dosing machine operates on the syringe principle. – A pneumatic actuator connects a dosing chamber to a product hopper. – A cylinder equipped with a piston draws the product into the dosing chamber. – The pneumatic actuator then disconnects the connection with the dosing hopper and connects the dosing chamber to the dosing tool. – The cylinder then ejects the product from the dosing chamber. Technical specifications: Manufacturer: COUDERT Year of manufacture: 2015 Length: 1500 mm Width: 1200 mm Height: 1700 mm With a rotating table (dimensions: 920 x 680 x 900 mm (L x W x H)). The turntable operates through the action of a rotating platform on a motorized axis, serving several functions: Start of line: Empty packages are placed on the platform, then positioned by an aligner (optional) to enter the packaging line. Mid-line: Packages can be removed and replaced during packaging for inspection. End of line: Packages are stacked to prevent conveyor jams. paPtQNCp

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts Nodpfxsfg E H Se Akqola – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications Nledpefg E H Usfx Akqoa New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw Njdpfsx S Hmzex Akqela - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: good (used), Position sensor, valve actuator, valve drive, actuator, servo motor -Type: T 100 a 502 Nlodpjb Uhr Usfx Akqsa -Weight: 0.3 kg

Condition: used, mileage: 17,270 km, power: 174 kW (236.57 HP), color: white, gearing type: automatic, Year of construction: 2023, Equipment: ABS, central locking, power assisted steering, seat heater, - Electronic window actuator - left - Electronic window actuator - right To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be pleased to assist you, Tel: BA3 Active Brake Assist, BH1 HOLD Function, C74 Mercedes-Benz illuminated entry sills, CA1 AGILITY CONTROL suspension, CL1 Height and tilt-adjustable steering wheel, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and add-on parts painted in vehicle color, CU4 Aerodynamics package, D14 Anodized roof rails, E07 Hill-Start Assist, E1D Digital radio (DAB), E1E Navigation, E1F Display diagonal 26 cm (10.25"), E1T Touchpad, E34 Buffer battery for start process, E4S Smartphone integration package, E57 Trailer socket electrics, E65 Burmester surround sound system, E6M MBUX multimedia system Mid, E70 Switch position - lower control panel, ES2 12V socket in trunk/load compartment, ES3 12V sockets for rear seat rows, right and left, EZ6 Parking package with 360° camera, EZ8 PARKTRONIC, F2Z Decorative trim double-stripe design, F48 Heated windshield washer system, F65 Electrically folding exterior mirrors, F66 Lockable glove compartment, F69 Folding exterior mirrors, F72 Automatically dimming exterior and interior mirrors, FC1 Electronic key in chrome design, FG0 Center console with roller shutter, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, FZ8 Comfort-opening and closing via IR remote control, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H15 Heated passenger seat, H16 Heated driver seat, H20 All-round heat-insulating glass, HH4 THERMOTRONIC automatic climate control, HZ7 Semi-automatic TEMPMATIC climate control in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning for passenger seat, JA1 Warning lamp for washer fluid level, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP1 PRE-SAFE, JP2 Assistance package, JS1 360° camera, JW5 Lane Keeping Assist, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, LA2 Headlight Assist, LB9 Exit lighting, LC1 Ambient lighting, LC4 Comfort roof control unit, LC5 Surround lighting in exterior mirrors, LC6 Lighting in rear grab handle with reading light, LC7 Footwell lighting front, LC8 Rear hatch surround lighting, LE1 Adaptive brake light, LG2 LED Intelligent Light System, LG4 LED rear, brake, and indicator lights, LG8 High Beam Assist PLUS, M5O 174 kW (237 hp) at 4200 rpm, MJ2 ECO display, MJ8 ECO start-stop function, MO6 Emissions standard Euro 6d M/N1 GR. II, MS1 Cruise control, MU8 OM654 DE 20 LA Power stage 5 Top Type, MX0 BlueEFFICIENCY package, R1O 18” light-alloy wheels in 5-twin-spoke design, RY2 Wireless tire pressure monitoring front and rear axles, S37 Armrests outside for individual seats, 2nd rear row, SA6 Passenger airbag, SB1 Comfort driver seat, SB2 Comfort passenger seat, SE4 Passenger seat lumbar support, SE5 Driver seat lumbar support, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag passenger, SH9 Windowbags for driver and passenger, SZ7 Storage net driver seat backrest, SZ8 Storage net passenger seat backrest, T14 Active latch for sliding door, T19 Sliding door ... Nodpfxoyf U Hzo Akqsla Metallic, alloy wheels, ESP, ...

Condition: good (used), Koma Pigs stunning device Nlsdpsy Edvtsfx Akqoa This device is suitable for the electrical stunning of animals. From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Condition: used, axle configuration: 3 axles, first registration: 02/2011, loading space length: 7,585 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 27 m³, Chassis: Aluminium, reinforced design Two fully automatically welded I-beam longitudinal members with welded crossmembers, 1,600 mm chassis width Axles and Suspension - "430 mm off-road disc brakes" DOA axle assemblies, 3 x 9 t with DC air suspension, first axle liftable with starting aid (Wabco system), Wabco Smart Board, raise and lower valve. Tyres and Wheels: 6 wheels with GreBe 385/65 R 22.5 tyres, approximately 90-100% tread on ALCOA aluminium rims, 11.75x22.5 ET 120 King Pin: 2" bolted into a 10 mm thick plate Landing Legs: 1x aluminium drop-leg landing gear for uncoupling the empty trailer Brake System: To E.C. standards, two-line Wabco system, spring-actuated parking brake acting on two axles and Wabco EBS-E system with RSS (Roll Stability Support), aluminium air tanks Electrical System: Built to StVZO guidelines, with 2x LED five-chamber lights (Aspöck system), 24V installation with two 7-pin sockets and one 15-pin socket, LED side marker lights, 2 separate halogen reversing lamps Tipping Body / Hopper – Conical Floor Construction: Aluminium hopper design with trapezoidal floor and rectangular top rail, fully assembled and welded from patented profiles and aluminium plates, side walls of 4 mm aluminium 5086H24, floor 8 mm in a high-abrasion alloy (5383H34), two strong top rail profiles fully welded to the side walls. Front wall sloped at 20°, 4 mm thick; rear wall approx. 20° slope, swinging tailgate in smooth design without chute, tailgate resting, double-pivot hinges flush with top rail, automatic pneumatic central locking with two locking hooks, tailgate clamps on hopper, rear overhang suitable for paver applications. Nlsdpfx Aoy Ekx Iekqea Hydraulic System: Hydraulic cylinder mounted on the front wall, working pressure of 150 bar, with approx. 2.5 m hose and 1" quick-release half-coupling, tipping angle approx. 48-49° Accessories: 6 Parlok mudguards, 2 "STAS" swinging mud flaps, 2 wheel chocks, robust folding underrun protection with impact guard, 1 central chain, 1 aluminium roof bow, additional inclinable aluminium bow in front of tailgate, 1 plastic toolbox, Cramaro sliding tarpaulin electrically operated with remote control, 2 Ferry eyes at rear frame (for rope attachment), 3 m aluminium ladder, shovel holder inside front wall, nearly new plastic wear linings on side and front walls! (Original cost approx. €5,800), shovel & broom holder left on frame, etc. Unladen weight: 5,030 kg Offer and images non-binding.

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen Nledsy Apdqepfx Akqja \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: used, mileage: 313,520 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2020, emission class: euro6, color: white, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, VW T6.1 Special Equipment: - Discover Media streaming & internet audio-navigation system - Driver assistance system: front and rear parking sensors - Cruise control system (incl. speed limiter) - Heated rear window - ISOFIX mountings for child seat on rear seat - Multifunction display Plus - Seat package: 8-seater Additional Equipment: - Deactivatable front passenger airbag - Driver and front passenger airbags Nsdpfx Aoxl Nxdokqjla - Traction control system (ASR) - Electrically adjustable and heated exterior mirrors - Convex exterior mirrors - Brake Assist (HBA) - Multi-collision brake - Lockable glove compartment - Fuel tank: 70 litres - Bluetooth mobile phone interface - Engine: 2.0 L - 110 kW TDI - Non-smoker package - Wheelbase: 3400 mm - Low emissions according to Euro 6d-TEMP - Engine start/stop system - Lashing eyes in load compartment - Seat belt warning system - Heat-insulating glazing - Central locking system with remote control and interior actuation - TÜV due: March 2027 Errors and prior sale excepted. Internal vehicle number: 11426

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Process Control & Monitoring: All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation Nlsdsy D Rq Uspfx Akqea - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation.

Condition: used, mileage: 346,385 km, power: 397 kW (539.77 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 12,675 kg, maximum load weight: 28,325 kg, overall weight: 41,000 kg, axle configuration: 8x4, wheelbase: 4,040 mm, next inspection (TÜV): 05/2025, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, large cab, high roof, 2x comfort seats, 2x bunks, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric roof, auxiliary heater, air horn, 16-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), intarder, PTO, roof spoiler, differential lock, fog lights, high beam headlights, work lights, rotating beacon, leaf-air suspension, air + light connections for trailer coupling, aluminum tank, alloy wheels, low-noise G1, 2nd axle steered, green environmental badge. Nljdpfx Aoy Ehvdskqsa Wheelbase: 4040 mm Body: Heavy-duty tractor unit ZF 16 S 252 OD gearbox with ZF intarder, MAN BrakeMatic, 8-ton steered leading axle LOL-08, rear axle differential lock, stop brake, XXL driver’s cab with high roof, EBERSPÄCHER D4S additional air heater, R134A stationary air conditioning, NORDIC cab insulation, fine dust and pollen filter, KSM module, flame-start system, ventilation for rear axle and gearbox, aero package, ABS, disc brake on front axle, drum brake on rear axle, parking brake with pneumatic actuation of front axle brake, brake pad wear indicator, daytime running lights, ambient lighting, MAN Tronic, TollCollect pre-installation, MAN Media with navigation system, start assist, stabilizer on all axles, 2x sleeping bunks, electric lifting/sliding roof, cool box, 3-stage hydraulic system for heavy-duty transport, flywheel-side PTO, 160t gross train weight! ACCESSORY DETAILS WITHOUT WARRANTY, subject to change, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Very Good Condition. 12 Months Warranty - Max temperature 1300°C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch Nlodpfsx U Ekdsx Akqja - Heating on 5 sides - Inlet and exhaust air with dampers, electrically operated via Belimo actuators - Intake fan controlled by frequency converter via controller - JUMO control system (switchable to other languages!) - Additional type S trailing element for external data recording - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection variant: prepared for fixed connection, 32A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, baking oven, tempering oven, laboratory furnace, hardening furnace

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device sanding unit pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation adjustment of units in two axes stepless feed speed adjustment Nljdpfx Akeyhn Rfsqoa power supply: 380 V

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, GIGANT / Mosca SoniXs-TR-6 Base – Fully Automatic Strapping Machine Professional Mosca SoniXs-TR-6 Base – the proven flagship from the German market leader in fully automatic strapping technology. Up to 35 packages/min with a 600 × 600 mm frame size. TECHNICAL DATA • Model: SoniXs-TR-6 Base • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 35 packages/min • Frame size: 600 × 600 mm • Conveyor speed: 0.1 – 1.0 m/s (infinitely variable) • Strapping: PP straps, width 5–12 mm • Control: MSCB-1 with digital control panel • Working height: approx. 850 mm Njdpfx Aey Eqquskqsla EQUIPMENT & FEATURES • SoniXs ultrasonic technology – low emissions & energy-efficient • Standard-6 strap path system – tool-free maintenance • Pneumatic actuators for optimum strapping process • CE marked ex-works – ready for immediate use • Modular concept – can be expanded to tandem machine • Cost-efficient base version with proven mechanics • Optimized chassis – flexible positioning • Two separate control cabinets for extended applications • Pneumatic hold-down device available • Stop options for various applications • Volt-free contacts for line integration • Four swivel castors with locking brake SoniXs Ultrasonic Technology: The patented Mosca sealing system operates without warm-up time, requires minimal maintenance, and produces reliable, strong seals – unique in the industry. APPLICATION AREAS Perfect for: logistics, shipping departments, e-commerce, wholesalers, printing houses, pharmaceutical and food industries. Ideal for cartons, packages, and other packaging units requiring reliable strapping for transport. Application areas: high-throughput environments where process reliability and uptime are crucial. ABOUT MOSCA Mosca from Waldbrunn is Germany’s market leader in strapping technology and has been synonymous with the highest quality and reliability for decades. The SoniXs series is the flagship of fully automatic strapping machines. CONDITION & AVAILABILITY Fully functional, regularly serviced, and well maintained. Normal wear consistent with age, technically in excellent condition. Ready for immediate use – no hidden defects. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Collection by buyer or shipping by freight carrier upon agreement. Transport costs on request (depending on destination). Viewing and test run possible by appointment. All information without guarantee. Subject to errors and typographical mistakes.

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, clearance between the columns: 1,100 mm, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Nodpey E Rncjfx Akqela Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: - Anti-vibration levelling pads - BluePower - Servo pump drive for lower energy consumption - Wear resistant plasticizer, surcharge - BluePower - Complete insulation of plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hotrunner - Hydraulic cascade control, 4-fold for hotrunner - Conveyor control - Mechanical robot interface according to EUROMAP 18 - Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts - Hydraulic core pull system 2-fold on moving platen - Hydraulic core pull system 2-fold on fixed platen - Pneumatic core pull system 1-fold on moving platen - Pneumatic core pull system 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hotrunner control circuits - Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Potential-free contact for signal "plasticizing" on socket HAN 3 A - Switch over to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reading unit - Graph display and analysis package with 10 graphs - Trend graphics - PV-closed loop control - Interface for production data consisting of 5 potential free contacts inside the control cabinet - 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg - Vacuum circuit only 4 x - Pressure circuit 4 x - Rotation servo A-axis (0-270°) - Pneumatic C-axis (0-90°) - Indexing control of conveyor - Safety Pack; soft function - Reiser

Condition: used, maximum load weight: 31,418 kg, overall weight: 39,000 kg, axle configuration: 2 axles, first registration: 12/2023, loading space length: 1,362 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, Year of construction: 2023, Vehicle complies with EU type approval and comes with a Certificate of Conformity (CoC). Registration country: GERMANY. TÜV certificate LS0510855 Z1 for coil transport. Main frame height: front 125mm, rear 423mm, Smart Generation. "MODULOS" bolted chassis. E-spare wheel carrier, basket version bolted for 2 E-wheels, mounted behind the axle group. Axle spacing: 1310/1410 mm. Exemption permit for up to 45 tons gross train weight. 10-year anti-perforation warranty on the chassis (see warranty terms). External frame with curtain hook profile and 3 pairs of stake pockets. Continuous lashing holes in the external frame. Underrun protection. King pin: 2" to SAE standard, replaceable. King pin position: 1690 mm. Side impact protection combined with pallet box. Starting aid (liftable front axle), activated by "3x Braking" – use permitted only as a starting aid. Model SCS 24/L - 13.62 C E B. Manufacturing date 08.12.2023. Body length 13,620 mm, body width 2,480 mm, front wall height 2,400 mm, body height front 2,680 mm, maximum body height 2,780 mm, internal clearance height front 2,600 mm, internal clearance height rear 2,700 mm. Total height front (unladen): 4,000 mm; rear (unladen): 3,995 mm. Rear loading height (unladen): 1,185 mm. Tire size: 385/65R22.5. GVW (permissible/technical): 39,000/39,000 kg. Payload (permissible/technical): 31,418/31,418 kg. Axle load (permissible/technical): 27,000/27,000 kg. Fifth wheel load (permissible/technical): 12,000/15,000 kg. Curb weight complete: 7,582 kg. Saddle height (unladen): 1,153 mm. Reference length external: 13,690 mm. Body width: 2,550 mm. Ride height: 265 mm. Wheelbase: 7,700 mm. Rear door height: 2,748 mm, width: 2,480 mm. 5 pairs stake pockets 80x80 mm for coil restraint posts. Coil well: 7,200/320/1,250mm. Pair of coil-combi restraint posts 80/70 mm. Brake disc diameter: approx. 430 mm. ROTOS SCB running gear system (disc brakes). Axle: SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel attachment via central alignment per DIN 74 361 Part 3. SCB air suspension type: MRH-KM30 3. Double-line compressed air brake system with standard connectors. Steel air tanks. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double diaphragm spring actuators. Lift and lowering device with AUTO-RESET function. 2 chocks with holders. Landing gear manufacturer: JOST, semi-round baseplate, single-side operation, low-maintenance. Lighting system: 24V with multi-chamber lamps. 2 x 7-pin sockets (1x DIN ISO 3731 / 1x DIN ISO 1185) and 1 x ISO 12098 socket. Continuous lamp carrier in white with "SCHMITZ" embossing. LED side marker lights synchronized with indicators. 1 pair of LED lane marker lights. Without reversing warning system / ramp approach aid. Tire brand SCB "SELECTION": Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone, for regional service (M + S). 6 x 385/65R22.5 (11.75x22.5). Steel wheels ET 120. Protective caps for wheel nuts. Additional pair of straight plastic fenders between the axles. Straight plastic fenders. Antispray mud flaps with Schmitz logo. Lashing rings: 11 pairs rated at 6 t and 5 pairs at 4 t tensile force per ring, as per EN 12640. Plastic toolbox with lid holder, shelf and drawer, located behind the axle group. Plastic water tank 30 liters. Pallet stop right side, 19 mm high, on external frame. Rear rubber impact protection. 2 vertical rubber dock bumpers on lamp panel. Pallet box for 24 Euro or 16 ISO pallets. Pallet box ground clearance: 284 mm. Hol Nodpfx Ajyr Uz Sskqela

Condition: used, mileage: 62,950 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, seat heater, - Electronic window actuator - left - Electronic window actuator - right Nledpfx Asy D Dngskqja - In order to provide you with the best possible advice, we kindly ask you to make an appointment. Mr. Kiel will be pleased to assist you, Tel: BA3 Active Brake Assist, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C1L AMG front bumper with decorative elements in black, C74 Mercedes-Benz illuminated entry badge, CF8 Sports suspension, CL1 Steering wheel adjustable in tilt and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, CN1 Exterior side sills, CU4 Aerodynamics package, D12 Roof rails, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1F 26 cm (10.25") display, E1T Touchpad, E4S Smartphone integration package, E6M MBUX multimedia system Mid, E70 Switch position lower control panel, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk / load compartment, ES3 12 V sockets for 2nd / 3rd row of seats right and left, ET4 Active distance assist DISTRONIC, EX8 Navigation Plus, EZ5 Parking package, EZ8 PARKTRONIC, F3S Exterior mirrors painted black, F65 Exterior mirrors, power-folding, F66 Lockable glove compartment, F69 Ext. mirrors, F72 Auto-dimming exterior and interior mirrors, F84 Digital interior mirror, FB1 AMG trim elements, FB4 AMG rear spoiler lip on tailgate, FC1 Electronic key with chrome look, FG0 Center console with roller cover, FK4 Radiator grille painted black, FP3 Mirror package, FR8 Reversing camera, FS5 Illuminated mirrors for sun visors, FZ8 Comfort opening and closing with infrared remote control, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H15 Heated seat for passenger, H16 Heated seat for driver, H20 Heat-insulating all-round glazing, HH4 THERMOTRONIC automatic climate control, HZ7 Semi-automatic air conditioning TEMPMATIC in rear, IN1 Wheelbase 3200 mm, short overhang, J55 Seat belt warning system for passenger seat, JA1 Warning lamp for windshield washer fluid level, JA7 Blind spot assist, JA9 Traffic sign assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP1 PRE-SAFE, JP2 Assist package, JW5 Lane keeping assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Misfuel protection, KB5 Main fuel tank 70 liters, LA2 High beam assist, LC4 Comfort roof control unit, LC5 Surround lighting in exterior mirrors, LC6 Reading light in 2nd row grab handle, LC7 Footwell lighting front, LC8 Surround lighting tailgate, LC9 Ambient lighting in cockpit, LE1 Adaptive brake light, LG2 LED Intelligent Light System, LG4 Rear, brake and indicator lights in LED technology, LP3 Interior lighting package, LP4 Logo projection, MJ2 ECO display, MJ8 ECO start/stop function, MO6 Emission class Euro 6d, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800 rpm, MX0 BlueEFFICIENCY package, PS2 AMG Line, Q50 Removable tow ball, QA4 Towing capacity 2500 kg, RK4 AMG alloy wheels 8 J x 19, gloss-turned, RY2 Tire pressure monitoring front and rear, wireless, S00 Airbag control unit Generation AB12, S37 Outside armrests for individual seats, 2nd row, SA1 Seat cushion depth adjustment driver, SA2 Seat cushion depth adjustment passenger ... Metallic paint, alloy wheels, electronic immobilizer, ESP, navigation system, particle filter, warranty, ...