Used Fezer Vpl 200 for sale (15,559)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Redpfxjx Dnb Uj Akxet Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: Table size: 2000 x 880 mm (table made entirely of cast iron) with extendable frame support Main motor: pole-changeable 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Rsdpfx Asy Ih Thskxst Spindle height adjustment: 110 mm Spindle tilting: 45° with Holz Her 3-roller power feed Availability: short term Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, Hydraulic Dough Divider Panirecord automatic dough dividing and shaping Space-saving Versatile in use Rjdsy Ik A Sjpfx Akxst Capacity: 900 to 1250 pieces/hour Connection: 400V, 16A-CEE plug Used machine You will find many more bakery machines in our large showroom!

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Grain mill grinding turbine Stone mill for grain, pulses and spices Table machine wood Corundum ceramic grinding stone Output: approx. 200g / minute Grinding degree: Infinitely variable from very fine to coarse Hopper capacity approx. 1.3 kg of grain Connection 220V, 600 watts Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine exhibition / demonstration machine Rodefxk Tqopfx Akxot with warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) Rjdpfx Ajwld Upokxet 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz Rjdpfx Aewld Tfokxot 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm Rsdowlgnrjpfx Akxet 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Redpfx Asy Hkgbokxjt Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures Rsdpfey Hkfdjx Akxet (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system Rjdpoy Hkd Hjfx Akxjt - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Rjdpjxfluuofx Akxjt Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Rsdpfx Akovca Rcexst Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack Redpfx Ajwtmi Eekxst

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Rjdew S Dmdopfx Akxet Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Redpfexy Tlwex Akxet

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Redpfx Asv Sbmqekxot Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm Rodpfswp Eblox Akxet sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Rjdpjyvgf Djfx Akxet Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Rjdpsycckcsfx Akxot Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Rsdpjy H H Hqefx Akxot Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Colour: Grey Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes Rodpfey Ewv Tex Akxot - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, axle configuration: 3 axles, first registration: 02/2015, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - EBS = Remarks = Number of axles: 3, Kerb weight: 8,610 kg, Gross weight: 41,000 kg, Kingpin size: 2 inch, Suspension type: air suspension, ABS, EBS, Body build year: 2015, Sidewall material: insulated, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: SLXe 200, Refrigeration unit: diesel, Unit hours / diesel: 11,774, Wall thickness: 45 mm, Cooling type: Cooling and freezing, Axle type: BPW = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 8 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 6 mm; Tyre tread right: 5 mm Weights Unladen weight: 8,610 kg Payload: 32,390 kg Gross vehicle weight: 41,000 kg Functional Refrigeration unit: Diesel (11,774 operating hours) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range covers all European makes, model years and price categories. Redpow Srxnsfx Akxjt Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Professional service • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more… Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry through our website. Ask directly about our European warranty package.

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Rsdjy Edn Nopfx Akxjt Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Redpfx Aeqynq Rskxjt Pulse control, initial lift, CE certificate,

Condition: used, Year of construction: 2007, Extraction connection: 200 mm Max. air flow: 4000 m³/h Filter area: 20 m² Sound pressure: 70 dB Chip volume: 400 l Space requirement: 1775 x 898 x 2005 mm Storage location: Nattheim Redpfsy Hry Aex Akxet