Grinding wheel dressing machine

Kapp CS 200 CNC

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm Hedpjirax Usfx Af Aofk -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Hfsdpfsw A Iilex Af Aek Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Hsdpfjyucd Hox Af Aefk Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: like new (used), functionality: fully functional, total width: 600 mm, total length: 855 mm, total height: 2,125 mm, Quick-freezing system for baked goods Gram model: SF500 G S RA L2 25B For a maximum of 20 trays, 600 x 400 Digital temperature display from +10 to -30°C Energy-saving system EHT Freezer, ready for connection Hfjdpfx Aowyruaof Ajk Freezer with refrigerant R 290 A Connection: 230V Dimensions: 600 x 855 x 2125 mm (W x D x H) Used equipment, cleaned With warranty + spare parts service We have many more refrigeration units in stock!

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Equipment / Additional information: With heating Also very interesting for the textile industry Hedpovf Iubofx Af Aefk

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Hjdpfx Ajyq S Iyjf Asfk This device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table Hfodpfx Asx D I H Def Aek • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, functionality: fully functional, machine/vehicle number: div., For Sale: • 1x Kuris Pionier, spreading machine including spreading table, automatic servo-cutter, and band knife. Set price: €6,750 (disassembly by the buyer) • 1x Kuris Pionier, spreading machine including spreading table and band knife. Set price: €5,750 (disassembly by the buyer) Hsdpfowpww Esx Af Aofk 1x Bierrebi cutting machine, including blade preparation table. Price: €4,950

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° Hfsdpfxewp S Tne Af Ask - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter - Cooler - Technical documentation

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Hodpferbz T Nox Af Ajfk Automatic tool changer with 10 positions, mounted on the machine portal